Wireless Video

"C" stands for compact - and that is what CLR2 is all about. Wireless video with no external antennas, it is small and pracitcal. Its transmission range of 300m makes it ideal for film sets and similar production environments. Features Zero-Delay wireless video (<0.001sec) Up to 1080p60 Inputs: 3G-SDI, HDMI 1.4 Outputs: 3G-SDI, HDMI 1.4 V-Mount Battery Plate option for Receiver Rec Trigger: HD-SDI and HDMI (with limitations) Compatible with all NON-DFS-WHDI-Systems, also from other manufacturers DSC Scan: Built-in frequency scanner (via HDMI) Technical Specs Range: 300ft/ 1000m LOS Video Inputs: 1x 3G-SDI, 1x HDMI 1.4 Type-A receptacle* 1x Loop-out 3G-SDI on Transmitter Video Outputs @ RX: 2x 3G-SDI, 1x HDMI 1.4 Type-A receptacle SDI and HDMI Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Record Trigger: via SDI and HDMI Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: Yes, HDMI to SDI Power Input: 4-pin Connector 7.2-18 V DC or via integrated V-Mount plate Power Consuption: TX: 8 Watts; RX: 8 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto (only INDOOR USE allowed) DC-SCAN via HDMI for channel selection before use necessary Dimensions Transmitter (without Antennas): 13,1 x 7,2 x 2,2 cm Dimensions Receiver (with Antennas): 14,1 x 10,0 x 2,2 cm Weight: Transmitter: 380g Weight: Receiver: 540g Multiple mounting options with 1/4" holes Configuration Interface: Oled dispay via 3 buttons Support Resolutions: 1080p 23.98/24/25/29.97/30/50/59.94/60 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i59.94 Wireless Non-DFS Frequencies: 5550, 5590, 5630, 5670, 5150, 5190, 5230, 5270, 5310, 5510   What's In The Box? 1 x Dwarf CLR2.MKII Transmitter 3x Flexible Sword Antennas 1 x Dwarf CLR2.MKII Receiver with Antenna cap 2x 4pin - DTap Cables 2x AC Adapter 1x Magicarm 1/4"-20 - 1/4"-20 1x USB flash drive with manual 1x Quick Start Quide 1x Case DFS: NO Frequency Selection, only manual channel selectionNOTE: Because of the non-DFS / only manual channel selection these devices (Dwarf connection, Hollyland, CVW,...) are allowed for indoor use only!ONLY CH5 (5190) and CH6 (5230) are allowed for outdoor use.

A more powerful and also ultra compact alternative to the stub antennas. Same performance as the Fixed Mushrooms (#DC.X.0019) but way smaller. What's In The Box? #DC.X.0034 2x RX Omnidirectional Rod Antennas  What's In The Box? #DC.X.0015 5x RX Omnidirectional Rod Antennas

Extend your receiver range up to 2500m / 8.202ft What's In The Box? 1x RE Antenna 5x Antenna cable

Circular polarization - when proper alignment of your device is hard to archieve. Very good option for gimbal operation or drone use (indoor). What's In The Box? 2x Flexible Clover Leaf  

Dwarfs standard antennas; light, flexible, powerful. Make sure the flat surface of the antennas is facing the RX direction. What's In The Box? #DC.X.0020 2x Fix Mushroom Antennas   What's In The Box? #DC.X.0023 5x Fix Mushroom Antennas

A more powerful and very compact alternative to the stub antennas. What's In The Box? 2x Fix Mushroom Antennas

A more powerful and also ultra compact alternative to the stub antennas. Same performance as the Fixed Mushrooms (#DC.X.0019) but way smaller. What's In The Box? #DC.X.0033 2x Mini Mushroom Antennas  What's In The Box? #DC.X.0035 5x Mini Mushroom Antennas

QOD+ provides superior hardware solution for GPU driven video output. It converts DisplayPort output to four SDI outputs supporting all standard frame-rates, up to 60fps. QOD+ is controlled directly by QTAKE software to provide smooth, jitter-free video output with embedded audio and timecode. This unique custom-made device is compatible with every version of QTAKE, from HDx1 up to HDx4 or with two QOD+ devices up to HDx8/4Kx2    FEATURES 4 independent SDI outputs Very low latency of just 1 frame* SDI embedded audio SDI embedded timecode Thunderbolt compatible DisplayPort input Analog audio input Genlock input Support for HD-SDI and 3G-SDI formats Interlaced, Progressive or PsF output 4K output support up to 60fps USB control directly from QTAKE software DIP switch control for standalone operation Single, compact, DC powered unit Future-proof design upgradable by firmware Fanless design for entirely silent operation    Technical Specs Video Input: DisplayPort with embedded audio Reference Input: HD Tri-level sync Input formats: HDx2 3840 x 1080, HDx3 1920 x 3240, HDx4 3840 x 2160 Video Output: 4x 3G-SDI with embedded audio, DisplayPort with embedded audio Audio Input: DisplayPort embedded audio, 3.5mm stereo analog audio Dimensions: 11,7 x 16,8 x 4,3cm (4.6” x 6.6” x 1.7”), Weight 780g Power: Universal Power Supply (included)100-240V, 50/60Hz AC input, 12V, 24W max DC output    In the Box Screenport SDI+ Multi-plug adapter Two dual-band WiFi antennas USB-C to USB-C cable USB-C to Lightning cable  

Shooting in a remote location often requires live stream or proxy media sharing to provide efficient control over the production process. ScreenPort SDI Pro delivers both and much more. Using industry-standard power connectors and rugged metal enclosure it was designed to be mounted on the camera to capture SDI video, audio and metadata and stream it over the local network to multiple clients in its standalone mode. When connected to iOS device ScreenPort SDI Pro offers ultra-low latency streaming over the internet and proxy media upload to QTAKE Cloud to make the content instantly available to main unit or remote collaborators.   FEATURES Streaming to multiple clients SDI auto-record SDI metadata capture Access Point mode Rugged metal case Powered by camera Camera-to-cloud ready    Technical Specs Video Input / Output: 3G-SDI / 3G-SDI loop-through Audio Input: 3.5 mm unbalanced stereo / balanced mono Data ports: WiFi (2.4/5.0 GHz, 802.11 a/b/g/n/ac) /Ethernet / USB-C Power:USB-C Power input 15W (5VDC/3A)LEMO Power input 18W (6 – 18 VDC) Dimensions: 11,1 x 10,8 x 2,3 cm (4,37″ x 4,25″ x 0,91″) Weight: 240 g (0.53 lb)    In the Box Screenport SDI Pro Multi-plug adapter Two dual-band WiFi antennas Lemo - Lemo cable Dtap - Lemo cable SDI - SDI cable USB-C to USB-C cable USB-C to Lightning cable  

iOS devices feature amazing displays that often exceed the quality of dedicated portable and on-board SDI monitors. In addition to color accuracy, wide gamut, and slim form factor, they offer responsive touchscreen interface and incredible computing power. But they lack video input. ScreenPort SDI+ adds video input to iPad, iPhone or Mac and turns it into professional 3G-SDI monitor capable of capturing up to 1080p60 video feed with your personal portable device. ScreenPort app provides video controls, analysis and recording tools unmatched by most professional monitors.     FEATURES Video, audio, metadata monitoring & recording SDI embedded or analog audio capture Auto-recording using camera SDI flags Streaming to remote monitors over internet Compatible with QTAKE applications Battery powered operation Bus-powered operation when using Mac Wired and wireless connection to host devices Preloaded and custom 3D LUT processing Predefined and custom frame-lines Waveform, vectorscope and histogram analysis Focus peaking and customizable false color Future-proof design upgradable by firmware    Technical Specs Video Input / Output: 3G-SDI / 3G-SDI loop-through Audio Input: 3.5 mm unbalanced stereo / balanced mono Data ports: WiFi (2.4/5.0 GHz, 802.11 a/b/g/n/ac) / Ethernet / USB-C Power: USB-C power adapter / External batteries Dimensions: 115 x 85 x 30 mm (4.53″ x 3.35″ x 1.18″) Weight: 160 g (0.35 lb)    In the Box Screenport SDI+ Multi-plug adapter Two dual-band WiFi antennas USB-C to USB-C cable USB-C to Lightning cable  

All on-set video professionals know that wireless transmitters strip out metadata from the camera output. Digital cinema cameras use ancillary space of the SDI signal to output timecode, record flag, filename and other valuable information. Unfortunately, wireless devices will not transport this part of the SDI signal. MetaCoder solves this problem by processing metadata in a way that preserves it regardless of the wireless sender. Just place the MetaCoder in the chain between the camera and the transmitter and you’re done. QTAKE will now be able to read the metadata, just like if it was connected to the camera using the SDI cable.      FEATURES Zero latency metadata processing Camera model auto-detection Support for ARRI and SONY cameras (RED support coming soon) SD/HD/3G-SDI input and outputs Loop-through Optional network connection to camera OLED status display Rotary push knob menu control Internal battery to allow hot-swapping power cables Future-proof design upgradable by firmware Fanless design for entirely silent operation    Technical Specs Video Input: 3G-SDI Video Outputs: - 3G-SDI with processed metadata- 3G-SDI loop-through Data ports: - Ethernet- USB-C Power:- 2-pin Lemo connector- Internal Battery  In the Box MetaCoder Multi-plug adapter WiFi antenna SDI - SDI cable Lemo - Lemo cable DTap - Lemo cable  

Smart Assist All in one System: touchscreen, electronics, SSD and much more. FEATURES Touchscreen Rock-solid, sharp, super bright (500nits) True colour 22" 4K DCI-P3 Touchscreen Power Sources orks with mains, block and camera batteries (V- or Gold Mount) Hotswap capabilities and a 2-minute UPS High performance ProRes444 and h264 simulatnewously recoding Silent Fan speed can be controlled from the software to adapt to your environment Removeable SSD video drives The SSD video drives can be easily swapped Bluetooth Use standard Bluetooth devices such as a keyboard, mouse or headsets Stream to iDevices Stream live or playback video to up to 16 iPads and iPhones Low delay output Its built-in GPU processor gives the lowest processed video delay posseible in QTAKE  Technical Specs Screen: 22", Touchscreen Screen resolution: 4096x2304 pixels, 10bit Screen brightness: 500Nits Inputs: 2x 3G-SDI, 2x XLR Outputs: 2x 3G-SDI, 2x XLR-3 TC: BNC-LTC / SDI embedded Connect up to 2x HD/2K cameras Video hard drive type: 2x 2TB removable video SSD Camera battery socket: 1x IDX or Anton Bauer mount Recording: Apple ProRes / H264 / H265 USB: 2x USB-C / 2x USB 3.0 Power input: 18-30 VDC Power consuption: 100W max Power connection: Fischer (Arri type) connector UPS: Internal, 2 minutes LAN: 10 Gigabit Ethernet WiFi: SMA connectors Dimensions with stand (WxHxD): 61,0 x 41,5 x 15,0 cm Dimensions without stand (WxHxD): 54,0 x 32,6 x 11,9 cm Weight: 14,9 kg Mounting: Female C-stand Pin Ø30x50mm    In the Box Cheeseplates Handles Lamp Power supply Sunhood Transport case  

Smart Assist All in one System: touchscreen, electronics, SSD and much more. FEATURES Touchscreen Rock-solid, sharp, super bright (500nits) True colour 22" 4K DCI-P3 Touchscreen Power Sources orks with mains, block and camera batteries (V- or Gold Mount) Hotswap capabilities and a 2-minute UPS High performance ProRes444 and h264 simulatnewously recoding Silent Fan speed can be controlled from the software to adapt to your environment Removeable SSD video drives The SSD video drives can be easily swapped Bluetooth Use standard Bluetooth devices such as a keyboard, mouse or headsets Stream to iDevices Stream live or playback video to up to 16 iPads and iPhones Low delay output Its built-in GPU processor gives the lowest processed video delay posseible in QTAKE Routed outputs QUAD and OCTO models have built-in OLED display to name the outpus  Technical Specs Screen: 22", Touchscreen Screen resolution: 4096x2304 pixels, 10bit Screen brightness: 500Nits Inputs: 8x 3G-SDI, 2x XLR-3, 1x TC Outputs: 24x 3G-SDI, 2x XLR-3 TC: BNC-LTC / SDI embedded Connect up to 8x HD/2K cameras or 2x 4K camera Video hard drive type: 2x 2TB removable video SSD Camera battery socket: 1x Bebob or Anton Bauer mount Recording: Apple ProRes / H264 / H265 USB: 2x USB-C / 2x USB 3.0 Power input: 18-30 VDC Power consuption: 180W max Power connection: Fischer (Arri type) connector UPS: Internal, 2 minutes LAN: 10 Gigabit Ethernet WiFi: SMA connectors Dimensions with stand (WxHxD): 61,0 x 41,5 x 15,0 cm Dimensions without stand (WxHxD): 54,0 x 32,6 x 11,9 cm Weight: 16 kg Mounting: Female C-stand Pin Ø30x50mm    In the Box Cheeseplates Handles Lamp Power supply Sunhood Transport case  

Smart Assist All in one System: touchscreen, electronics, SSD and much more. FEATURES Touchscreen Rock-solid, sharp, super bright (500nits) True colour 22" 4K DCI-P3 Touchscreen Power Sources orks with mains, block and camera batteries (V- or Gold Mount) Hotswap capabilities and a 2-minute UPS High performance ProRes444 and h264 simulatnewously recoding Silent Fan speed can be controlled from the software to adapt to your environment Removeable SSD video drives The SSD video drives can be easily swapped Bluetooth Use standard Bluetooth devices such as a keyboard, mouse or headsets Stream to iDevices Stream live or playback video to up to 16 iPads and iPhones Low delay output Its built-in GPU processor gives the lowest processed video delay posseible in QTAKE Routed outputs QUAD and OCTO models have built-in OLED display to name the outpus    Technical Specs Screen: 22", Touchscreen Screen resolution: 4096x2304 pixels, 10bit Screen brightness: 500Nits Inputs: 4x 3G-SDI, 2x XLR-3, 1x TC Outputs: 12x 3G-SDI, 2x XLR-3 TC: BNC-LTC / SDI embedded Connect up to 4x HD/2K cameras or 1x 4K camera Video hard drive type: 2x 2TB removable video SSD Camera battery socket: 1x IDX or Anton Bauer mount Recording: Apple ProRes / H264 / H265 USB: 2x USB-C / 2x USB 3.0 Power input: 18-30 VDC Power consuption: 120W max Power connection: Fischer (Arri type) connector UPS: Internal, 2 minutes LAN: 10 Gigabit Ethernet WiFi: SMA connectors Dimensions with stand (WxHxD): 61,0 x 41,5 x 15,0 cm Dimensions without stand (WxHxD): 54,0 x 32,6 x 11,9 cm Weight: 14,9 kg Mounting: Female C-stand Pin Ø30x50mm    In the Box Cheeseplates Handles Lamp Power supply Sunhood Transport case  

Ovide KOKO – 10” Recording Monitor with DIT FunctionsThe Ovide KOKO is a versatile 10-inch recording monitor designed to meet the demanding conditions of film and video production. Built to withstand the toughest shoots, it combines powerful video assist features with essential DIT (Digital Imaging Technician) functionalities. Whether on set, in live production, or on the go, the KOKO enhances workflow efficiency for camera crews and DIT professionals with its advanced toolset and robust design.With its flexible recording capabilities, the Ovide KOKO can capture up to four mixed-format 1080p cameras simultaneously or a single UHD camera in Apple ProRes. This makes it the perfect solution for multi-camera setups, interviews, and complex shoots where reliable recording is crucial. The bright, high-resolution touchscreen ensures precise image monitoring, while professional tools such as waveform, vectorscope, and LUT support provide accurate color and exposure control.Beyond its recording capabilities, the Ovide KOKO offers extensive DIT functionalities, including metadata handling, playback, and on-set color grading to streamline post-production from the very start. Its compact yet durable construction makes it easy to transport and suitable for both studio environments and challenging outdoor conditions. With a wide range of connectivity options and an intuitive interface, the Ovide KOKO is an essential tool for modern film production. CINE GEAR 2023 Technical Award Winner - Camera Technology: Accessories KOKO: A recording monitor with video assist functions in your hands. FEATURES Touchscreen Sharp, super bright (2000nits) True colour 10" HD (1920x1080) Camera Batteries Powered via regular V-, B- or Gold Mount batteries Metadata Digital cinema automatic metadata reading & recording Fast Boots in 1.5 seconds and quick rec-to-play switch SSD Recording Records to removalbe SSD Rock Solid Tough construction materials and high-end connectors No Software No additional software needed Connections USB-C, 3.5mm jack for headphones, audio in/out, and Ethernet connection  Technical Specs Screen: 10.1", TFT LCD, Touchscreen Display size: 1920x1200pixels, 8bit Screen brightness: 2000Nits Inputs: 4x 12G-SDI Outputs: 4x 12G-SDI TC: BNC-LTC / SDI embedded Connect up to 4x 1080p60 or 1x 4K Recording media: removalbe SSD disk (4mm thick) Camera battery socket: V-, B- or Gold Mount Recording: Apple ProRes Automatic metadata capture: Arri, Sony, Canon, Red: Focus, Iris, Zoom, Balance, Shutter, ISO, Looks USB: USB-C Power input: 12-17 VDC Power consuption: 25W Power connection: Lemo 2pin connector Dimensions (WxHxD): 25,0 x 16,9 x 3,3 cm Weight: 1,3 kg Mounting: Optiona all around the monitor   Functions Rec-Stop-Play in/out Histogram Waveform Focus assist Zebra False color LUTs Metadata   In the Box Power supply Sunhood V-Mount battery mount New Firmware v1.7Ovide is launching the new firmware version v1.7 for Ovide Koko, featuring the following highlights:Quad Playback functionLock Touchscreen functionDropdown menu to select viewRGB/BIAS monitor adjustmentMuch faster file indexingEnhanced grids on video metersNew vectorscope with skin tone axis and coloured trace Quicktime metadata compatibility with SilverstackNew keyboard shortcuts Extended integration with SkaarhojDownload here  

All you need to work is your Apple computer with QTAKE: A cable will turn it into a fully equipped video assist set. FEATURES  Ergonomic Platform Position your computer to suit your height and the way you work, using the adjustable platform. Removalbe SSD Video Drives The SSD video drive can be easily temoved and swapped Low Delay Output Its built in GPU processor gives the lowest processed video delay possibel for QTAKE. Cabin Luggage Travel with your whole system as cabin luggage due its reduces size and weight (7,65 Kg) Rack Mountable Rack mount your Ovide Smart Dock and take it anywhere    Technical Specs Inputs: 2x 3G-SDI Outputs: 6x 12G-SDI TC: SDI embedded Connect up to 2x HD/2K cameras Recording media: 1x 1TB removalbe SSD disk Camera battery socket: 1x IDX Recording: Apple ProRes / H264 / H265 USB: 1x USB-C / 2x USB-3.0 / 1x USB 2.0 / 1x Gigabit Ethernet WiFi: Using your Apple computer Bluetooth: Using your Apple computer Power input: 18-30 VDC Power consuption: 175W max (while charging the computer) Power connection: Fischer (Arri type) connector Dimensions (WxHxD): 25,0 x 16,9 x 3,3 cm Weight: 7,65 kg Mounting options on handles Requires Apple Computer and Qtake Software   In the Box Computer Stand Handles Power Supply  

Forget about IT, IP address planning, setting up the networt - Auto setup WiFi and LTE.NEW 5G cellular speed up to 3.3 Gbps FEATURES Plug & Play Detect Smart Antenna from QTAKE and it will be ready to send video through its WiFi or 4G modems to any Apple device Compatability Smart Antenna works with any Ovide Smart equipment Power Source Powered with regular camera batteries, standard PoE equipment or most standard Ethernet PoE switches SIM Auto-Switch Dual-SIM with auto failover and load balancing between both SIMs WiFi Dual Band WiFi (2.4/5GHz) Up to 300 Mbps 4G/LTE Cat 6 with speeds up to 300 Mbps    Technical Specs Temperature Range: -20°C to 45°C WiFi Range: up to 300m (1000ft) Power Input: 11-36 VDC or Active PoE Power Consuption: 17W Dimensions (WxHxD): 30,6 x 15,8 x 15,8 cm Weight: 1,95 kg Mounting: Baby pin for C-Stand (Ø5/8" or 16mm) (3-1/2" or 9cm long) Weather Protection: IP67   In the Box Transport case  

Link AX expands your production networking capabilities with a ruggedized, set-ready aluminum chassis wrapped around a Wi-Fi 6 (802.11AX) router. Use Link AX for multiple workflow scenarios: more cameras and devices on your local production streaming network, camera-to-cloud for multiple cameras; simultaneous camera-control over multiple cameras. FEATURES Built for Production Wi-Fi monitoring with multiple Serv devices 20 independent viewers using VUER HDR app on mobile devices Add an internet connection to enable remote monitoring or camera-to-cloud workflows Simultaneous control of multiple cameras over Wi-Fi Rugged Design Robust Aluminum Chassis Gold-Mount and V-Mount Battery Plate Options ⅜” and ¼”-20 Mounting Points 5 customizable ethernet ports USB-A for cellular modems like Node II with Teradek Data    In the Box 1 x Link AX Wireless Access Point Router 5 Port (V-Mount) 1 x Lightstand Adapter 3/8in 1 x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable   Ships in June

The Teradek Link AX WiFi Router/Access Point is a robust solution designed specifically for filmmakers and content creators seeking reliable and high-speed wireless connectivity in various production environments. With advanced 802.11ax technology, the Link AX delivers exceptional performance, ensuring stable and seamless connections for video streaming, file transfers, and remote monitoring. Whether on a film set, during live events, or in remote locations, this device provides the robust connectivity necessary for professional production workflows.Featuring dual-band functionality, the Link AX supports both 2.4GHz and 5GHz bands, allowing for flexible network management and enhanced coverage. Its rugged design ensures durability in demanding environments, making it perfect for outdoor shoots or studio settings. The user-friendly web interface simplifies configuration and monitoring, enabling users to manage their networks with ease. Furthermore, the Link AX is capable of supporting multiple devices simultaneously, making it ideal for collaborative projects where multiple crew members need access to the same network.With additional features such as Power over Ethernet (PoE) support and compatibility with Teradek's ecosystem, the Link AX is a versatile addition to any production setup. It not only enhances the capabilities of wireless video transmission systems but also serves as a reliable access point for internet connectivity. With its exceptional performance and ease of use, the Teradek Link AX WiFi Router/Access Point is a must-have tool for any serious filmmaker.Features of Teradek Link AX802.11ax (Wi-Fi 6) technologyDual-band support (2.4GHz and 5GHz)Power over Ethernet (PoE) capabilityUser-friendly web interface for easy configurationSupports multiple simultaneous connectionsRugged and durable designCompatibility with Teradek's ecosystemHigh-speed data transmissionTechnical SpecificationsWi-Fi standard: 802.11axMax data rate: Up to 1.2 Gbps (5GHz) and 574 Mbps (2.4GHz)Power input: PoE or 12V DCOperating temperature: -20°C to 60°CDimensions: 6.1 x 5.1 x 1.3 inches (155 x 130 x 33 mm)Weight: 1.0 lbs (454 g)Network ports: 1 x Gigabit EthernetAntenna type: Internal and external antennasDimensions and WeightsWeight: 1.0 lbs (454 g)Dimensions: 6.1 x 5.1 x 1.3 inches (155 x 130 x 33 mm)Delivery ScopeTeradek Link AX WiFi Router/Access PointPower supplyMounting hardwareUser manualWarranty card

The Video-Aware, Ultra-Low Latency Streaming Protocol. ART - Adaptive Reliable TransportART is a resilient, ultra-low latency streaming protocol for mission-critical video transport over public networks.ART is a streaming protocol that delivers secure, ultra-low latency (ULL), broadcast-quality audio and video over the public Internet. ART utilizes joint source channel coding to evaluate video content and network characteristics simultaneously, optimizing for both in one step. The result is a highly resilient,adaptive video stream that ensures the quality and integrity of your content over the most challenging network conditions.Built on award-winning technology, ART was developed using the same methodology behind Teradek’s Emmy® and Academy Award-winning Bolt wireless video system. FEATURES 100ms latecy over WAN Support for HD and 4K workflows AES-256 encryption Extremely resilient with rapid recovery No re-transmission delays Easy firewall traversal Rapid recovery over challenging networks By-directional. Simultaneous encoder and decoder per device.    TECHNICAL SPECS Video Video Inputs: 1x SD/HD/3G/6G-SDI (75 Ω BNC) and 1x HDMI Type-A Video Output: 1x SD/HD/3G/6G-SDI (75 Ω BNC and 1x HDMI Type-A Supported Resolutions 4Kp 23.98/24/29.97/30 1080p 23.98/24/25/29.97/30/50/59.94/60 1080i 50/59.94/60 720p50/59.94/60 Video Processing Video Compression/Depression: ISO MPEG-H Part 2: High Efficiency Video Coding (HEVC)/ITU H.265 HEVC: Main Supported Video Transport Protocols: ART Supported Video Bitrate: 4000 kbps to 30 Mbps Format Conversion: Built-in video scaler and deinterlacer Audio Processing Input/Output: Embedded SDI/HDMI Audio Compression: AAC-LC (128kbps, 192Kbps, 256Kbps) Audio Channels (Embedded): Mono, Stereo, Surround, 7.1 Audio Sample Rate: 48Khz Interfaces Configuration Interface: Featurerich Web UI for configuration and control, LED Indicators Ethernet: 2x 10/100/1000 BASE-T Gigabit Ethernet (RJ45) Encryption: AES-256 Power Input: 110 to 240 VAC Consumption: 495 W  Physical Attributes: Rackmount: 2 RU Dimensions: 43,2 x 30,7 x 8,9 cm Weight: 4.1Kg  

The Bolt 6 Color Bands from Teradek are designed for the Bolt 6 Transmitters and Receivers. They fit atop of your Bolt TX and RX so as to help differentiate which units are paired together.   Choose from XT or LT kits of 8 bands, or select single color bands to suit your needs.     The XT Kit includes   Bolt 6 XT TX Color Band (Red Rubber) Bolt 6 XT TX Color Band (Yellow Rubber) Bolt 6 XT TX Color Band (Green Rubber) Bolt 6 XT TX Color Band (Blue Rubber) Bolt 6 XT RX Color Band (Red Rubber) Bolt 6 XT RX Color Band (Yellow Rubber) Bolt 6 XT RX Color Band (Green Rubber) Bolt 6 XT RX Color Band (Blue Rubber)     Part no. for single rubber bands - LT - Transmitter: Red: #11-0915Blue: #11-0918Yellow: #11-0916Green: #11-0917 Part no. for single rubber bands - LT - Receiver: Red: #11-0919Blue: #11-0922Yellow: #11-0920Green: #11-0921  

The Bolt 6 Color Bands from Teradek are designed for the Bolt 6 Transmitters and Receivers. They fit atop of your Bolt TX and RX so as to help differentiate which units are paired together.   Choose from XT or LT kits of 8 bands, or select single color bands to suit your needs.     The XT Kit includes   Bolt 6 XT TX Color Band (Red Rubber) Bolt 6 XT TX Color Band (Yellow Rubber) Bolt 6 XT TX Color Band (Green Rubber) Bolt 6 XT TX Color Band (Blue Rubber) Bolt 6 XT RX Color Band (Red Rubber) Bolt 6 XT RX Color Band (Yellow Rubber) Bolt 6 XT RX Color Band (Green Rubber) Bolt 6 XT RX Color Band (Blue Rubber)     Part no. for single rubber bands - XT - Transmitter: Red: #11-0907Blue: #11-0910Yellow: #11-0908Green: #11-0909 Part no. for single rubber bands - XT - Receiver: Red: #11-0911Blue: #11-0914Yellow: #11-0912Green: #11-0913  

  Teradek Bolt 6 XT 750ft Wireless Transmitter/Receiver SetThe redesigned, streamlined, zero-delay wireless video solution with next-gen 6GHz connectivity, plus cross-compatibility with the Bolt 4K Series. 12G-SDI + HDMI for full DCI 4K resolution in 10-bit 4:2:2 HDR; integrated 5-pin USB for wireless camera control; integrated battery plate options with power pass-through, and more.The Bolt 6 XT Set is a real-time wireless video transmission system that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. Bolt 6 XT can send and receive color-accurate, True-HDR videos in under 0.001 seconds using the set’s included Bolt 6 XT video Transmitter and Receiver.Key features of the Bolt 6 XT Set include range options designed for a variety of production needs, fast reconnection times, intuitive and easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 XT series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 XT users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers.Bolt 6 XT has been redesigned to seamlessly fit into your setup, with a smaller, lighter-weight build that runs cooler and 50% quieter than the Bolt 4K. An integrated 5-pin USB port allows for effortless and wireless camera-control setup when using SmallHD Smart Monitors, and an improved long range wireless video mode. Bolt 6 also offers new tools for high-end users to have better visibility over their connections and signals, adding confidence to the workflow no matter how challenging the environment.The included Transmitter and Receiver are cross-compatible with the entire Bolt 4K Series – including Bolt 4K, Bolt 4K LT, and the Bolt 4K Monitor Modules – giving you the option to expand your workflow requirements. Link up to 6 receivers to one transmitter, or unlimited receivers when used in Broadcast Mode (available on MAX models).Bolt 6 XT offers three line-of-sight options: 750 ft., 1500 ft., and the MAX Set, which can be configured for up to 5,000+ ft. Additionally, you can upgrade your set to include Gold or V-Mount Battery plates. Features Zero-Delay wireless video (<0.001sec) Up to DCI 4K resolution True HDR with 10-bit 4:2:2 Inputs: 12G-SDI, HDMI 2.0 Outputs: 12G-SDI, HDMI 2.0 Gold & V-Mount Battery Plate options Bolt 6GHz HIGHLIGHTS Powered by our BB3 chipset Pairs with up to 6 receivers, or unlimited receivers when used in Broadcast mode with the MAX models 12 new 40MHz wide channels from 5.925 to 6.425GHz Enhanced long-range image quality feature New SDI pattern tool to monitor SDI signal quality Universal compatibility with all Bolt 6 and Bolt 4K Series Ultra fast pairing and intuitive setup with Bolt Manager App AES-256 encryption and RSA 1024 key pairing prevents unauthorized access   Technical Specs Range: 750ft/ 228m LOS Video Inputs: 1x 12G-SDI SMPTE 2082-1 standard/75 Ω, 1x HDMI 2.0 Type-A receptacle* 1x Loop-out 12G-SDI on Transmitter Video Outputs @ RX: 2x 12G-SDI SMPTE 2082-1 standard/75 Ω, 1x HDMI 2.0 Type-A receptacle SDI ancillary Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: Yes, HDMI to SDI Power Input: 2-pin Connector 6-28 VDC Power Consuption: TX: 9 Watts; RX: 11 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels) Dimensions Transmitter: 13,2x 9,1x 2,7 cm Dimensions Receiver: 11,2x 13,9x 2,7 cm Weight: Transmitter: 344g / 12.1oz Weight: Receiver: 430g / 15.2oz Multiple mounting options with M3 and 1/4" holes Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30/50/59.94/60 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz 5.755 ~ 5.795 GHz 5.945 ~ 6.425 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz  What's In The Box? 1 x Bolt 6 XT 750 TX 1 x Bolt 6 XT 750 RX 1 x Lightstand Adapter 3/8in 1 x Hot Shoe Adaptor2 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable 2 x SDI 12G BNC to BNC 18in/46cm Cable 1 x Teradek Case Large - Bolt XT TX/2RX 1 x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable 9 x Antenna 2dBi Rigid V 4.9-7.3Ghz RP-SMA 1 x USB 2.0 Type A Male to USB Type C Male - 1m Cable    

  Teradek Bolt 6 XT 1500ft Wireless Transmitter/Receiver SetThe redesigned, streamlined, zero-delay wireless video solution with next-gen 6GHz connectivity, plus cross-compatibility with the Bolt 4K Series. 12G-SDI + HDMI for full DCI 4K resolution in 10-bit 4:2:2 HDR; integrated 5-pin USB for wireless camera control; integrated battery plate options with power pass-through, and more.The Bolt 6 XT Set is a real-time wireless video transmission system that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. Bolt 6 XT can send and receive color-accurate, True-HDR videos in under 0.001 seconds using the set’s included Bolt 6 XT video Transmitter and Receiver.Key features of the Bolt 6 XT Set include range options designed for a variety of production needs, fast reconnection times, intuitive and easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 XT series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 XT users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers.Bolt 6 XT has been redesigned to seamlessly fit into your setup, with a smaller, lighter-weight build that runs cooler and 50% quieter than the Bolt 4K. An integrated 5-pin USB port allows for effortless and wireless camera-control setup when using SmallHD Smart Monitors, and an improved long range wireless video mode. Bolt 6 also offers new tools for high-end users to have better visibility over their connections and signals, adding confidence to the workflow no matter how challenging the environment.The included Transmitter and Receiver are cross-compatible with the entire Bolt 4K Series – including Bolt 4K, Bolt 4K LT, and the Bolt 4K Monitor Modules – giving you the option to expand your workflow requirements. Link up to 6 receivers to one transmitter, or unlimited receivers when used in Broadcast Mode (available on MAX models).Bolt 6 XT offers three line-of-sight options: 750 ft., 1500 ft., and the MAX Set, which can be configured for up to 5,000+ ft. Additionally, you can upgrade your set to include Gold or V-Mount Battery plates. Features Zero-Delay wireless video (<0.001sec) Up to DCI 4K resolution True HDR with 10-bit 4:2:2 Inputs: 12G-SDI, HDMI 2.0 Outputs: 12G-SDI, HDMI 2.0 Gold & V-Mount Battery Plate options Bolt 6GHz HIGHLIGHTS Powered by our BB3 chipset Pairs with up to 6 receivers, or unlimited receivers when used in Broadcast mode with the MAX models 12 new 40MHz wide channels from 5.925 to 6.425GHz Enhanced long-range image quality feature New SDI pattern tool to monitor SDI signal quality Universal compatibility with all Bolt 6 and Bolt 4K Series Ultra fast pairing and intuitive setup with Bolt Manager App AES-256 encryption and RSA 1024 key pairing prevents unauthorized access   Technical Specs Range: 1500ft/ 457m LOS Video Inputs: 1x 12G-SDI SMPTE 2082-1 standard/75 Ω, 1x HDMI 2.0 Type-A receptacle* 1x Loop-out 12G-SDI on Transmitter Video Outputs @ RX: 2x 12G-SDI SMPTE 2082-1 standard/75 Ω, 1x HDMI 2.0 Type-A receptacle SDI ancillary Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: Yes, HDMI to SDI Power Input: 2-pin Connector 6-28 VDC Power Consuption: TX: 9 Watts; RX: 11 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels) Dimensions Transmitter: 13,2x 9,1x 2,7 cm Dimensions Receiver: 11,2x 13,9x 2,7 cm Weight: Transmitter: 344g / 12.1oz Weight: Receiver: 430g / 15.2oz Multiple mounting options with M3 and 1/4" holes Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30/50/59.94/60 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz 5.755 ~ 5.795 GHz 5.945 ~ 6.425 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz    What's In The Box?   1 x Bolt 6 XT 1500 TX 1 x Bolt 6 XT 1500 RX 1 x Lightstand Adapter 3/8in 1 x Hot Shoe Adaptor2 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable 2 x SDI 12G BNC to BNC 18in/46cm Cable 1 x Teradek Case Large - Bolt XT TX/2RX 1 x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable 9 x Antenna 2dBi Rigid V 4.9-7.3Ghz RP-SMA 4 x Teradek 6G Flexible H Antenna "Mushroom" (2dBi 4.9-7.3Ghz RP-SMA) 1 x USB 2.0 Type A Male to USB Type C Male - 1m Cable