Wireless Video

  Teradek Bolt 6 XT MAX Set with 10K RX V-MountBolt 6 XT is a wireless video transmission system that supports up to 4K60 10-bit 422 HDR video over 12G-SDI. Bolt 6 uses Teradek’s patented Zero-Delay silicon chip to send wireless video over 5GHz and 6GHz radio frequencies. This kit includes a Bolt 6 XT TX and a Bolt 6 XT 10K RX. Bolt 6 XT 10K RX is a zero-delay video receiver, offering a remarkable wireless range of up to 10,000 feet (3 kilometers). Its enhanced directional antenna is specifically designed for superior RF performance, minimizing interference by focusing signal reception and benefiting from robust internal shielding. Its all-in-one enclosure design not only boosts range and reliability in challenging RF environments, but it also eliminates the hassle of external antenna cables. This results in a much cleaner setup, expediting deployment from its case onto a c-stand. Control your setup with ease using the Bolt App, which simplifies device pairing, allows fine-tuned frequency adjustments, and includes a built-in spectrum analyzer for advanced RF diagnostics. This kit is compatible with additional Bolt 6 and Bolt 4K receivers.Features Complete Bolt Set with Bolt 6 XT TX and 10K RX Up to 10,000ft (3km) range with Zero-DelayUp to 4K30 10-bit 422 HDR Video5GHz and 6GHz Auto or Manual Frequency Selection6GHz is available in the US, EU, Canada, Japan and Australia/New ZealandInputs: 12G-SDI, HDMI 2.0 Outputs: 2x12G-SDI, HDMI 2.0 on Panel Antenna with built-in RX Purchase with Gold or V-Mount Battery Plates Bolt 6GHz HIGHLIGHTS Powered by our BB3 chipset Pairs with up to 6 receivers, or unlimited receivers when used in Broadcast mode with the MAX models 12 new 40MHz wide channels from 5.925 to 6.425GHz Enhanced long-range image quality feature New SDI pattern tool to monitor SDI signal quality Universal compatibility with all Bolt 6 and Bolt 4K Series Ultra fast pairing and intuitive setup with Bolt Manager App AES-256 encryption and RSA 1024 key pairing prevents unauthorized access   Technical Specs Range: 10,000ft/ 3km LOS Video Inputs: 1x 12G-SDI SMPTE 2082-1 standard/75 Ω, 1x HDMI 2.0 Type-A receptacle* 1x Loop-out 12G-SDI on TransmitterVideo Outputs @ RX: 2x 12G-SDI SMPTE 2082-1 standard/75 Ω, 1x HDMI 2.0 Type-A receptacleDelay: <0.001sec Video Compression: visually losslessPower Input: 2-pin Connector 10-28 VDC Power Consuption: TX: 18 Watts; RX: 18 WattsRF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels)Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30/50/59.94/60 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz 5.755 ~ 5.795 GHz 5.945 ~ 6.425 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz  What's In The Box? 1 x Bolt 6 XT 10,000ft TX with V-Mount Plates1 x Antenna Array with built-in Bolt 6 XT 10K RX with V-Mount1x Hot Shoe Adapter1 x 2pin Conn. to PowerTap - 18in/46cm Cable1x 2pin Conn. to 2pin Conn 18in/46cm Cable 2 x SDI 12G BNC to BNC 18in/46cm Cable 1 x Teradek Case XL - Bolt XT TX/4RX 1 x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable 4 x Antenna 2dBi Rigid V 4.9-7.3Ghz RP-SMA (TX)2x 6G Flexible H Antenna "Mushroom" (2dBi 4.9-7.3Ghz RP-SMA) 1 x USB 2.0 Type A Male to USB Type C Male - 1m Cable 1 x Wooden Camera - Universal Ultra Arm Monitor Mount (Combo 1/4-20 & 3/8-16, 5") 4x Bolt 6 XT TX Color Bands (Red, Blue, Yellow, Green)    

  Bolt 6 XT 10K RX is a zero-delay video receiver, offering a remarkable wireless range of up to 10,000 feet (3 kilometers) over 5 or 6GHz frequencies. Fully compatible with both Bolt 6 and Bolt 4K transmitters, it integrates seamlessly into any existing Bolt 4K or Bolt 6 system. Delivering visually lossless 4K60 4:2:2 video via two 12G-SDI outputs, the Bolt 6 XT 10K RX ensures professional-grade image quality. Its enhanced directional antenna is specifically designed for superior RF performance, minimizing interference by focusing signal reception and benefiting from robust internal shielding. Its all-in-one enclosure design not only boosts range and reliability in challenging RF environments but it also eliminates the hassle of external antenna cables. This results in a much cleaner setup, expediting deployment from its case onto a c-stand. Control your setup with ease using the Bolt App, which simplifies device pairing, allows fine-tuned frequency adjustments, and includes a built-in spectrum analyzer for advanced RF diagnostics. Features Super long range (10,000ft/3km) receiver for Bolt 4K and Bolt 6Supports up to 4K60 10-bit 4:2:2 HDRFully integrated, directional panel antennaBuilt-in Gold or V-Mount battery plate2x 12G-SDI and 1x HDMI outputsLCD Display and Joystick Technical SpecsRange: 10,000ft/ 3km LOSDelay: <0.001secVideo Compression: visually lossless Support Resolutions:  4Kp23.98/24/25/29.97/30/50/59.94/60 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz 5.755 ~ 5.795 GHz 5.945 ~ 6.425 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz  Fully compatible with both Bolt 6 and Bolt 4K transmitters, it integrates seamlessly into any existing Bolt 4K or Bolt 6 system. What's In The Box?  1 x Antenna Array with built-in  Bolt 6 XT 10K RX with V-Mount Plate 1 x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable1 x USB 2.0 Type A Male to USB Type C Male - 1m Cable  

Ultra-Reliable Long-Range Wireless Video The SWIT Crew System is a new generation of professional wireless video transmission solutions designed for filmmakers, broadcasters, and live production teams. Powered by the advanced KUWI 2.0 Pro chipset, it ensures maximum stability, long-range performance, and ultra-low latency. Operating in the 5.1–5.9 GHz DFS-compliant frequency band with proprietary anti-interference RF technology, the system automatically scans and selects the optimal channel, providing robust performance even in crowded environments. With latency as low as 32 ms, visual lossless H.265 encoding up to 26.8 Mbps, and support for 3G-SDI, HDMI® and USB-C capture, the Crew System delivers reliable high-quality HD video for PC and Mac workflows. It supports 1T→4R multicast, ensuring one transmitter can seamlessly feed multiple receivers without signal loss. Embedded metadata and timecode trigger transmission, combined with AES-256 dual encryption protection, guarantee both professional workflow integration and maximum security. Each unit features a high-bright OLED display for intuitive configuration, while multiple power supply options (NP-F, V-Mount, 2-pin LEMO, USB-C) make the system highly versatile. The Crew family consists of four models—Crew, Crew V, Crew Max, and Crew V-Max—tailored to different on-set needs while remaining fully cross-compatible.Designed for Professional Film and Broadcast Work The SWIT Crew System is designed for professional film and broadcast environments, providing reliable wireless video transmission for every stage of production. It ensures that directors, camera assistants, DITs, and other crew members can monitor high-quality video feeds with minimal latency, even in complex shooting scenarios. Whether used on feature films, commercials, live events, or studio productions, the Crew System delivers consistent performance across multiple receivers simultaneously, thanks to its advanced multicast capabilities. Its robust anti-interference RF technology and long-range transmission make it ideal for both indoor and outdoor sets, allowing crews to maintain clear, uninterrupted communication and real-time decision-making. By combining flexibility, ultra-low latency, and professional-grade encryption, the SWIT Crew System enhances collaboration on set and ensures that every member of the production team has access to the same high-quality video signal at all times. SWIT Crew Versions • CrewThe base model Crew offers a compact form factor with NP-F battery support and 1.2 km / 4 000 ft line-of-sight transmission distance. Ideal for mobile productions and lightweight camera setups. • Crew V The Crew V includes the same transmission performance as the Crew but adds a dual-sided V-Mount design, allowing direct installation on V-Mount powered cameras and rigs with passthrough power. • Crew Max The Crew Max extends the range to 3 km / 10 000 ft line-of-sight with a built-in high-gain panel antenna on the receiver, combining NP-F power on the transmitter with V-Mount on the receiver for maximum flexibility. • Crew V-Max The flagship Crew V-Max combines 3 km range with dual-sided V-Mount transmitter and receiver design, making it the most powerful choice for demanding professional workflows and large-scale productions. Features – SWIT Crew System KUWI 2.0 Pro wireless technology (not Wi-Fi) Proprietary anti-interference RF system 5.1–5.9 GHz license-free DFS compliant Auto scan and channel selection 3G-SDI, HDMI® and USB-C HD video output H.265 codec up to 26.8 Mbps, visual lossless Consistent ultra-low 32 ms latency 1T→4R multicast capability Metadata and timecode trigger transmission High-bright OLED display for setup and monitoring AES-256 dual encryption protection Flexible power options: NP-F, V-Mount, 2-pin LEMO, USB-CTechnical Specifications – SWIT Crew System Transmission Distance: up to 3 km / 10 000 ft (depending on model) Video Interfaces: 3G-SDI, HDMI®, USB-C capture for PC/Mac Codec: H.265 up to 26.8 Mbps Latency: ~32 ms Multicast: 1T→4R Frequency: 5.1–5.9 GHz, DFS compliant RF Technology: KUWI 2.0 Pro with proprietary anti-interference Encryption: AES-256 dual encryptionBrochure DownloadDownload the Crew Brochure here

The new Ovide Smart Assist (2025) is the latest evolution of Ovide’s renowned video assist systems, designed to meet the needs of professional filmmakers and video operators. This next-generation device introduces a host of powerful upgrades, offering ultra-low latency video output, a 25% faster processing speed, and an advanced 12G-SDI interface for high-bandwidth applications. The integrated 8-GPU processor ensures the ability to manage up to eight fully processed and independent video paths, making it a top choice for multi-camera productions. Additionally, its built-in video router streamlines the workflow, while an integrated UPS protects against unexpected power interruptions.Not only does the Ovide Smart Assist (2025) excel in performance, but its new external design also enhances usability and portability. The device is now 20% lighter, making it easier to carry on set, while the robust construction ensures durability in demanding shooting environments. The 10% larger 1000-nit HDR display delivers outstanding brightness and clarity, allowing users to monitor footage with superior accuracy, even in bright daylight conditions. Powered by a single camera battery, it offers up to three hours of untethered operation, providing the flexibility required for dynamic shooting situations.Features – Ovide Smart Assist (2025) 12G-SDI support for high-bandwidth video applications Ultra-low video output latency for real-time monitoring25% faster processing speed for optimized workflow8-GPU processors enable eight independent video pathsBuilt-in video router for seamless input and output managementIntegrated UPS to prevent power interruptionsBattery-powered operation, lasting up to three hours on a single charge20% lighter construction for better portability10% larger 1000-nit HDR display for superior brightness and image qualityRugged design built for demanding on-set conditionsTechnical SpecificationsVideo input/output: 12G-SDI, multiple video streams supportedProcessing unit: 8-GPU processor architectureLatency: Ultra-low for near-instant responseDisplay: 1000-nit HDR, 10% larger than previous modelsBattery life: Up to 3 hours with a single camera batteryWeight reduction: 20% lighter than previous versionsBuilt-in components: Video router and UPSConstruction: Durable, impact-resistant designDimensions & WeightCompact and lightweight form factor20% lighter than previous Smart Assist modelsOptimized for portability without sacrificing display sizeIn the BoxOvide Smart Assist (2025) main unitPower supply unitBattery mounting systemProtective transport caseUser manual

Ranger’s best-in-class performance allows broadcasters, live production companies, churches, and government entities to implement real-time wireless workflows over licensed and unlicensed bands, from 4.9 GHz up to 6.4 GHz. And new for 2023, Ranger now includes 24 additional 20mhz RF channels over 6 GHz (U-NII 5), providing access to wireless spectrum rarely usedby other electronics. Features Up to 2160p60 Resolution 10-bit 4:2:2 Image Quality Transmitter: 12G-SDI & HDMI 2.0 Input, Looping 12G-SDI Output Receiver: 2x 12G-SDI, 1x HDMI 2.0Zero-Delay - go from TX to RX in .001 seconds Technical Specifications SDI / HDMI up to 1080p6010-bit HDRInput Output ScalingBroadcast Mode: 5000ft Models OnlyRanges: 750ft, 2500ft, 5000ftFrequencies Supported:Licensed:4.900 - 5.150 GHz5.350-5.470 GHz5.850-5.925 GHzUnlicensed:5.150-5.250 GHz (Non-DFS)5.250-5.350 GHz (DFS)5.470-5.725 GHz (DFS)5.725-5.850 GHz (Non-DFS)5.925-6.425 GHz (UNII-5)AES-256 EncryptionRF Power: 21 dbm EIRPMulticast: 1:6 (unlimited RX on 5000ft models when set to "Broadcast" mode)Suggested Form Factor: Camera-backBattery Mount Option: Gold Mount / Gold Mount 26V (TX/RX) and V-Lock Mount (TX/RX) Ranger AppManage Ranger from your device with the Ranger Manager app for iOS and Android.Pair and unpair transmitters and receivers with the touch of a buttonMeasure and analyze the frequency and amplitude of a signalView live channel strength for licensed/unlicensed bandsMonitor your live RF spectrum bandwith Item Codes: 10-2580-V: Ranger Mk II 750ft 3G-SDI/HDMI - Wireless TX/RX Set V-Mount10-2590-V: Ranger Mk II 2500ft 3G-SDI/HDMI - Wireless TX/RX Set V-Mount 10-2595-V: Ranger Mk II 5000ft 3G-SDI/HDMI - Wireless TX/RX Set V-Mount 

Ranger’s best-in-class performance allows broadcasters, live production companies, churches, and government entities to implement real-time wireless workflows over licensed and unlicensed bands, from 4.9 GHz up to 6.4 GHz. And new for 2023, Ranger now includes 24 additional 20mhz RF channels over 6 GHz (U-NII 5), providing access to wireless spectrum rarely usedby other electronics. Features Up to 2160p60 Resolution 10-bit 4:2:2 Image Quality Transmitter: 12G-SDI & HDMI 2.0 Input, Looping 12G-SDI Output Receiver: 2x 12G-SDI, 1x HDMI 2.0Zero-Delay - go from TX to RX in .001 seconds Technical Specifications SDI / HDMI up to 1080p6010-bit HDRInput Output ScalingBroadcast Mode: 5000ft Models OnlyRanges: 750ft, 2500ft, 5000ftFrequencies Supported:Licensed:4.900 - 5.150 GHz5.350-5.470 GHz5.850-5.925 GHzUnlicensed:5.150-5.250 GHz (Non-DFS)5.250-5.350 GHz (DFS)5.470-5.725 GHz (DFS)5.725-5.850 GHz (Non-DFS)5.925-6.425 GHz (UNII-5)AES-256 EncryptionRF Power: 21 dbm EIRPMulticast: 1:6 (unlimited RX on 5000ft models when set to "Broadcast" mode)Suggested Form Factor: Prosumer Cameras, Flycam, Rigging, DronesBattery Mount Option: Gold Mount / Gold Mount 26V (RX only) and V-Lock Mount (RX only) Ranger AppManage Ranger from your device with the Ranger Manager app for iOS and Android.Pair and unpair transmitters and receivers with the touch of a buttonMeasure and analyze the frequency and amplitude of a signalView live channel strength for licensed/unlicensed bandsMonitor your live RF spectrum bandwith Item Codes: 10-2530-V: Ranger Micro 750ft 3G-SDI/HDMI - Wireless TX/RX Set V-Mount10-2540-V: Ranger Micro 2500ft 3G-SDI/HDMI - Wireless TX/RX Set V-Mount 10-2555-V: Ranger Micro 5000ft 3G-SDI/HDMI - Wireless TX/RX Set V-Mount 

Prism Mobile is the most compact bonded cellular video encoder in its class, delivering reliable 4K HDR streaming from the most challenging locations for live coverage on the go and camera-to-cloud workflows. Mission-Critical Network Bonding: Get exceptional worldwide internet connectivity virtually anywhere with two internal high-throughput Node modems with high-gain antennas uniquely designed for video applications. For maximum redundancy, Prism Mobile can bond* up to 9 network connections across cell phone Hotspots (4x), Ethernet (2x), and Cellular Modems (3x) – ensuring your stream never misses a beat. Achieve Prism’s true potential with Core, Teradek’s streaming media orchestration platform. Core allows you to securely monitor, manage, route, distribute, and archive your live video feeds from anywhere in the world. Features Two built-in 5G or LTE modems with high-gain antennasCBRS & Private Mobile Network readyBuilt-in Network BondingHEVC / AVC Compression12G-SDI & HDMI i/oUp to 4Kp60 10-bit HDR video8 CH. Audio | 5.1 & 7.1 Surround soundLicenses for return video and multi-outputLow-SWaP Design: 864g with battery platesGold / V-Mount: 3hr Runtime (tested in ideal conditions with a 90Wh battery)On-Board Recording, Store and Forward and Camera-To-Cloud Ready (Core, Fram.io, Sony C3 Portal, Sony Ci, PIX, AVID)Multiple Protocols: SRT, MPEG-TS, RTMP(S), RT, RIST, RTSP, TRT, HLS, DASH, WHIPPrism app for iOS and AndroidCore Cloud compatible, Local Control SDK available  Available Models:10-2857-5SV Prism 857-5SV Mobile dual 5G SW V-Mount 10-2857-5SG2 Prism 857-5SG2 Mobile dual 5G SW 26V Gold Mount 10-2857-5SG Prism 857-5SG Mobile dual 5G SW Gold Mount 10-2857-5S Prism 857-5S Mobile dual 5G SW No Mount 10-2857-CV Prism 857-C Mobile Mk II HEVC/AVC Encoder V Mount10-2857-CG26 Prism 857-CG26 Mobile Mk II HEVC/AVC Encoder Gold Mount 26V 10-2857-CG Prism 857-CG Mobile Mk II HEVC/AVC Encoder Gold Mount 10-2857-C Prism 857-C Mobile Mk II HEVC/AVC Encoder

SmallHD ULTRA 10 with built-in Bolt 6 Receiver with 1500ft range and V-Mount Plate. Ultra 10 strikes the perfect balance between screen size and lightweight portability with a feature-packed 10-inch Ultra-Bright Monitor designed to adapt to any production scenario. Key features include 2000nits of brightness, 6G-SDI architecture, an impact-resistant IP54-certified form factor, and more ways than ever to customize your PageOS workflow via touchscreen, joystick, large tactile buttons, and new multi-function rotary encoder knobs for maximum control in all conditions. The Ultra 10 Bolt 6 RX features an integrated Teradek Bolt 6 Receiver, allowing you to receive zero-delay wireless video from your camera via the new internal V-Antenna at ranges up to 750 or 1500 feet. It is available as a Gold Mount or V-Mount option. Ultra 10 is our first IP54-certified monitor, which is defined as resistant to water spray from any direction and protection against dust and dirt in extreme environments while operating in variable temperatures ranging from 0ºC to 40ºC. The chassis features raised edges protecting the front glass of the display and user-replaceable shock-absorbing bumpers to mitigate drops, tumbles, and impacts Ultra 10 comes with 5-pin locking USB and Ethernet ports for optional ARRI, Sony VENICE, BURANO and FX6, and RED® Camera Control (license and cable sold separately). FeaturesQD-LED Edge-Lit LCD Panel TechnologyUltra Protected - Rain, Sun, or SnowBuilt into a rugged, shockec-resistant chassis designed to withstand production and environmental rigors alike, designed with an IP54 rating. Defined as protected against harmful dust and water spray from all directiosn.Knob FunctionsFour Knobs, many applications - fly with capacitive-touch, long-push, short-push and rotary functionality.Multi-View HandheldPowerful Multi-View (feature coming soon) tools from SmallHDs 4K Production Monitors are available on the Ultra 10. View two camera feeds and use multibple tools pages all on screen at the same time, side-by-side.Product Highlights 10" QD-LED Edge-Lit LCD Touchscreen PanelBrightness: Up to 2000nits Resolution: 1920 x 1200 HDMI: 1x HDMI 2.0 input and 1x HDMI 2.0 output SDI: 1x 6G-SDI input and 1x 3G-SDI output Power Input: 2-Pin Locking Connector Control Ports: Ethernet, 5-Pin locking USBBuilt-in WiFi ReceiverBuilt-in Bolt 6 Receiver with 1500ft/457m range with internal AntennasBackwards compatible with Bolt 4K and Bolt 6 devices User Interface: Joystick with Rotary DialUI Lock Switch4x Custom-Function Buttons4x Multi-Function KnobsPageOS Features:Look-Around camera control interfaceTeradek RT Integration - Lens Control Overlay Useful Accessories available (sold separately)SunhoodARCA RailCamera ID & Tally LightCamera Control Licenses for RED, ARRI and SONY VENICEUltra QR Monitor MountUltra 10 also available (soon) with built-in Teradek Bolt 6 RX 750ft version.

SmallHD ULTRA 10 with built-in Bolt 6 Receiver with 750ft range and V-Mount Plate. Ultra 10 strikes the perfect balance between screen size and lightweight portability with a feature-packed 10-inch Ultra-Bright Monitor designed to adapt to any production scenario. Key features include 2000nits of brightness, 6G-SDI architecture, an impact-resistant IP54-certified form factor, and more ways than ever to customize your PageOS workflow via touchscreen, joystick, large tactile buttons, and new multi-function rotary encoder knobs for maximum control in all conditions. The Ultra 10 Bolt 6 RX features an integrated Teradek Bolt 6 Receiver, allowing you to receive zero-delay wireless video from your camera via the new internal V-Antenna at ranges up to 750 or 1500 feet. It is available as a Gold Mount or V-Mount option. Ultra 10 is our first IP54-certified monitor, which is defined as resistant to water spray from any direction and protection against dust and dirt in extreme environments while operating in variable temperatures ranging from 0ºC to 40ºC. The chassis features raised edges protecting the front glass of the display and user-replaceable shock-absorbing bumpers to mitigate drops, tumbles, and impacts Ultra 10 comes with 5-pin locking USB and Ethernet ports for optional ARRI, Sony VENICE, BURANO and FX6, and RED® Camera Control (license and cable sold separately). FeaturesQD-LED Edge-Lit LCD Panel TechnologyUltra Protected - Rain, Sun, or SnowBuilt into a rugged, shockec-resistant chassis designed to withstand production and environmental rigors alike, designed with an IP54 rating. Defined as protected against harmful dust and water spray from all directiosn.Knob FunctionsFour Knobs, many applications - fly with capacitive-touch, long-push, short-push and rotary functionality.Multi-View HandheldPowerful Multi-View (feature coming soon) tools from SmallHDs 4K Production Monitors are available on the Ultra 10. View two camera feeds and use multibple tools pages all on screen at the same time, side-by-side.Product Highlights 10" QD-LED Edge-Lit LCD Touchscreen PanelBrightness: Up to 2000nits Resolution: 1920 x 1200 HDMI: 1x HDMI 2.0 input and 1x HDMI 2.0 output SDI: 1x 6G-SDI input and 1x 3G-SDI output Power Input: 2-Pin Locking Connector Control Ports: Ethernet, 5-Pin locking USBBuilt-in WiFi ReceiverBuilt-in Bolt 6 Receiver with 750ft/228m range with internal AntennasBackwards compatible with Bolt 4K and Bolt 6 devices User Interface: Joystick with Rotary DialUI Lock Switch4x Custom-Function Buttons4x Multi-Function KnobsPageOS Features:Look-Around camera control interfaceTeradek RT Integration - Lens Control Overlay Useful Accessories available (sold separately)SunhoodARCA RailCamera ID & Tally LightCamera Control Licenses for RED, ARRI and SONY VENICEUltra QR Monitor MountUltra 10 also available (soon) with built-in Teradek Bolt 6 RX 1500ft version.

Compatible with Prism Mobile, Prism Flex Mk II, Prism Mobile Backpack. Supercharge your production with the all new Node 5G cellular modem. The Node 5G supports the latest sub 6GHz frequencies matching worldwide standards.PerformanceThe Node 5G offers a higher level of performance. It supports 5G SA (Standalone) and NSA frequencies, increasing compatibility with networks worldwide. With Carrier aggregation and MIMO on uplink, the Node 5G can increase your upload connectivity and reliability for supported carriers in the most challenging environments. It delivers a maximum of 480 Mbps downlink and 480 Mbps uplink, providing more than enough bandwidth for your Prism and Serv devices.Carrier CompatibleNode 5G works with virtually any SIM card, and can operate on most 5G/LTE/4G/3G data bands in the world. In combination with Teradek products, the Node 5G can be customized for continued carrier support allowing custom firmware for specific carrier options.Node 5G can join private networks using band 48 or 5 such as Ericsson, Baicells, and many other networks for transporting video across private cellular networks.Node 5G is authorized to be provisioned with T-mobile and AT&T in the United States. It’s also authorized with Verizon Native Carrier when used with Teradek Data. Full Verizon certification is coming soon.Teradek Data readyThe Node 5G contains an eSIM slot that is provisioned to be Teradek Data ready.  Allowing continued and growing native carrier support.GPSNode 5G supports GPS mux’ed on it’s antenna for future uses with Teradek products or your third party application.Super Durable and Weather ResistantTraditional USB modems are easily broken during extended use in the field. Node 5G solves the durability problem with an aluminum chassis, 3 ¼”-20 mounting options, and a 5-pin locking connector to attach to your Teradek device or computer.*While a carrier may be supported, action may be required by the end user to authorize the modem. Features Latest 5G frequency and capabilityCBRS CapableGlobal internet connectivityExternal high-gain antennasUniveresal SIM compatibility Technical Specs Network +Carrier Aggregation: Up to 4x CA Downlink and 2x CA uplinkG Nsa Sa: N1/2/3/5/7/8/12/13/14/18/20/25/26/28/29/30/38/40/41/48/66/70/71/75/76/77/78/79Lte Fdd: B1/2/3/7/8/12/13/14/17/18/19/20/25/26/28/29/30/32/66/71Lte Tdd: B34/3/39/40/41/42/43/48 (CBRS Capable)Wcdma: B1/B2/B3/B4/B5/B8/B9/B19Gnss: GNSS GPS / GLONASS / BDS / Galileo / QZSS GPS / GLONASS / BDS / Galileo / QZSSData Rate:5G SA Sub-6/5G NSA sub-6: DL 480 Mbps; UL 480MbpsLTE: DL 480 Mbps; UL 5.76 MbpsWCDMA: DL 42 Mbps; UL 5.76 MbpsSIM: 1x Nano (4FF) SIM, 1x Teradek Standard Data Embedded simInterface: 2 Status LEDs, USB to 5-pin connectorPower input: 5-Pin Connecotr, 5VDimensions: 9,14 x 5,59 x 2,54Weight: 90g3x 1/4"-20 threaded hole  Available Models:10-0033-1-A: USB-A10-0033-1-C: USB-C10-0033-1-L: 5-Pin

Compatible with Prism Mobile, Prism Flex Mk II, Prism Mobile Backpack.Get exceptional internet connectivity anywhere in the World with the Node II: Teradek’s high-performance LTE/4G/3G modem. Node II gives you nearly world wide LTE band coverage and universal cellular SIM card compatibility and set to work with virtually every carrier*.PerformanceWith external high-gain antennas and the industrial-grade Cat. 12 LTE modem, Node II gives you robust connectivity in the most challenging broadband environments.Node II delivers 4x faster download speeds (Max. 480 Mbps) and 3x faster upload speeds (Max. 150 Mbps) than its predecessor and features dual MFF2 SIM slots (nano & micro SIM adapters included).Carrier CompatibleNode II works with virtually any plastic SIM card, and can operate on most LTE/4G/3G data bands in the world. It’s been tested with over 100 different carriers with a growing list.Node II is certified with Verizon in the United States for direct activation on business class accounts.Node II is also fully compatible with Teradek Data plastic eSIM- offering higher performance Native coverage from Teradek.Teradek Data readyThe Node II CBRS contains an eSIM slot that is provisioned with Teradek Standard Data;  allowing worldwide network support.Super Durable and Weather ResistantTraditional USB modems are easily broken during extended use in the field. Node II solves the durability problem with an aluminum chassis, 3 ¼”-20 mounting options, and a 5-pin locking connector to attach to your Teradek device. *While a carrier may be supported, action may be required by the end user to authorize the modem. Features High-powered LTE/4G/3G modemGlobal cellular serviceExternal high-gain antennaUniversal SIM compatibility Technical Specs Network +Lte Tdd: B1/B2/B3/B4/B5/B7/B8/B9/ B12/B13/B14/B17/B18/B19/B20/ B21/B25/B26/B28/B292 /B30/B32/ B66Lte Tdd:  B38/B39/B40/B41Wcdma: B1/B2/B3/B4/B5/B8/B9/B19Max Data Rates: LTE FDD Cat 12: Up to 480 Mb/s DL, 150 Mp/s ULSim: 1x Nano (4FF) SIM, 1x Teradek Standard Data Embedded simEmbedded Module: Quectel EM12-G FCC ID: XMR201901EM12GInterface: 2 Status LEDs, USB to 5-pin connectorPower input: 5-Pin Connecotr, 5VBattery: NoneNominal Power Consumption: 5W MaxDimensions: 6,27 x 3,81 x 3,05Weight: 90g3x 1/4"-20 threaded hole  Available Models:10-0028-1-A: USB-A10-0028-1-C: USB-C10-0028-1-L: 5-Pin

Serv 4K is an all-in-one production streaming solution that unites next-gen hardware with simplified UI to easily manage and share 4K HDR streams in real time, whether you’re collaborating on set or around the world. Serv 4K allows both local and cloud-based streaming with Teradek’s free VUER app (iOS and Android) and Multiple Core Cloud Platforms (MacOS, iOS, Android and Web Browsers) as well as third-party integrations like Frame.io. During Local Streaming, up to four live camera feeds can be streamed to multiple local devices at once, even without an internet connection. Cloud-based streaming can be shared with an unlimited number of devices via MacOS, iOS, Android, or web browsers.This next-gen hardware includes an updated fan for cooling efficiency, directional buttons for menu navigation and military-grade 256-bit encryption. Serv 4K (2024) continues to support up to 45mbps HEVC, 10bit 4:2:2 color, and DCI-P3 / PQ 2084 for consistent color-accuracy from first shot through final color.Serv 4K is easy to set up, easy to manage, and comes with tools to keep every stakeholder in the loop, wherever they are. Features4K HDR with 10-bit 4:2:2 StreamingHEVC and AVC Compression12G-SDI and Loop Through256-bit Military-Grade EncryptionCellular Bonding with Serv AppJoystick and Buttons Technical SpecsVideo Inputs: 1x 12G/6G/3G/HD/SD-SDI and 1x HDMI 2.0Video Output: 1x 12G/6G/3G/HD/SD-SDI and 1x HDMI 2.0HDR Support: YesSDI Compliance:Simultaneous bonding over up to 7 Networks:Ethernet, Wi-Fi, USB cellular modem, Up to 4 cellphones (iOS or Android)Bonding: Serv 4K AppSupports Resolutions up to 4K DCIp60Supported Video Bitrate: 250 Kbps to 85 MbpsNumber of Encoder Streams: Up to one 4K DCIp60 4:2:2 10bitColor Correction:CDL/1024 1D LUT (supports 10-bit color)33x33x33 3D LUT (supports 10-bit color)Configuration InterfacesFeature-rich Web UI for local device management, configuration, and controlIntuitive iOS/Android configuration app (teradek Serv)OLED Status Display w/Nav control buttonsCore for cloud-based device managementSwitches: On/Off switchRecording Storage: Full-size SD/SDXC (class 6 and above) formatted exFATUSB formatted FAT32, NFSMobile App: Teradek Serv for iOS and Android deviceCloud Services: Teradek Core, Frame.io, Sony Ci, PIXUsb Interface Functionality: 2x Powered USB-C host ports with 3G/4G modem supportDimensions: 15,0 x 10,7 x 3,6 cmWeight: 476gPower Input: 2pin circular locking connectorNominal Power Consumption: 18WAuxilary Power Input: 6-28V DC

  Ace 750 is a lightweight, compact, HDMI wireless video system with built-in antennas designed to be used with mirrorless cameras, camcorders, action cameras and A/V workflows. It sends uncompressed zero-delay, 4Kp30, HDR video and audio with up to 750 feet (230m) of range. Ace 750 is cross-compatible with Bolt 4K and Bolt 6 in 5GHz and 6GHz modes and is fully compliant with FCC and CE frequency usage and power output guidelines. Ace 750 features an integrated hole pattern for mounting and can be powered with NP-F or LP-E6 batteries using an optional L-shaped plate.The transmitter (TX) and receiver (RX) units automatically detect and select the 5Ghz or 6GHz RF channel with the least interference and employ Auto-Frequency Switching to maintain optimal signal quality. Ace comes paired out of the box. The TX can send video to up to six RX devices at the same time using the Bolt Manager app for iOS or Android.Ace 750 is built with the same reliable wireless technology found in our acclaimed Bolt product line. Because of this, Ace 750 is fully compatible with all Bolt 4K and Bolt 6 models. Features 4Kp30 10-bit HDR Zero-Delay wireless video (<0.001sec) Range: 750 feet / 228 m 6GHz auto frequency switching Multi-receiver capable - up to 6 Receivers per Transmitter 2x 2dBi internal antennas (AMC mode always on) Technical Specs Range: 750ft/ 228m LOS Video Inputs: 1x HDMI 1.4b Type-A receptacle Video Outputs: 1x HDMI 1.4b Type-A receptacle Color Sampling: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Power Input: Barrel conntecotr 7-18V Power Consuption: 6 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto only, 40 MHz only, no blocked frequencies Dimensions Transmitter: 11,2 x 8,1 x  2,54 cm / 4.39" x 3.19" x 1"Mountability: Multiple mounting options with M3 and 1/4-20” holes Weight: Transmitter: 187 g / 6.6 oz Multiple mounting options with M3 and 1/4" holes Configuration Interface: OLED display - Input video format, Selected frequency, Video Quality %, Link statusSwitched: On/Off Switch Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30 1080p 23.98/24/25/29.97/30/50/59.94/60 1080i50/59.94/60 720p50/59.94/60  What's In The Box? 1 x Ace 750 Transmitter 1 x Ace 750 Receiver 1 x Lightstand Adapter 1/4-20in 1 x Hot Shoe Adaptor 2 x Ultra Thin HDMI Male Type A - HDMI Male Type A - 18in Cable 1 x PSU 18W AC Adapter 12VDC - 6ft Cable 1 x PTap to r/a barrel - 18in Cable    

  Bolt 6 RX Monitor Module is a wireless video receiver that supports up to 4K30 10-bit 422 HDR video. Bolt 6 uses Teradek’s patented Zero-Delay silicon chip to send wireless video over 5GHz and 6GHz radio frequencies. The Bolt 6 Receiver Monitor Module easily attaches to the back of SmallHD’s Cine 7, 702 Touch, and Indie 7 Smart Monitors. With this direct integration, the Bolt 6 and Smart monitor can share power and video, allowing you to reduce the amount of cables on set. With the Bolt 6 Monitor Module, Wireless Camera-Control is also possible because it integrates directly into SmallHD Smart Monitors. Bolt 6 Monitor Module RX offers two line-of-sight options: 750 ft. and 1500 ft. Additionally, you can upgrade your set to include Gold or V-Mount Battery plates.The 750 model includes V (vertical) Antennas. 1500 model includes both V Antennas and H (horizontal) antennas. H Antennas are designed to maximize signal robustness in the most challenging RF environments. Optionally, the 750 model of Bolt 6 Monitor Module RX can include a permanent internal antenna to allow for reliable zero-delay transmission in a more compact and durable form factor. Bolt 6GHz HIGHLIGHTS 12 new 40MHz wide channels from 5.925 to 6.425GHz Enhanced long-range image quality algorithm New SDI pattern tool to monitor SDI signal quality Pairs with up to 6 receivers, or unlimited receivers when used in Broadcast mode with the MAX models Universal compatibility with all Bolt 6 and Bolt 4K Series AES-256 encryption and RSA 1024 key pairing prevents unauthorized access Features Receive Wireless Video up to DCI 4K Zero-Delay wireless video (<0.001sec) 750 feet of range 4K HDR with 10-bit 4:2:2 Transmit 4Kp30 with HDMI; 1080p60 with SDI Gold & V-Mount Battery Plate options 4x Internal 2dBi Antennas Technical Specs Range: 750ft/ 228m LOS Video Inputs: 1x HDMI 1.4b Type-A receptacle Video Outputs: wireless SDI ancillary Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Color Sampling: HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: HDMI to SDI (4Kp23.98/30 HDMI input is scaled and looped out as 1080p23.98/30 on SDI loopout) Power Input: 2-pin Connector 6-18 VDC Power Consuption: 7 Watt Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels) Dimensions Transmitter: 6x 10,3x 3,3 cm / 2.4"x 4.1"x 1.3" Mountability: SmallHD Smart7 Monitor Weight: Transmitter: 206g / 7.3oz Multiple mounting options with M3 and 1/4" holes Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz 5.755 ~ 5.795 GHz 5.945 ~ 6.425 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz  Compare Chart: Ghz Support: Yes Compatible with Bolt 4K: Yes Availalbe Ranges: 750ft and 1500ft Maximum SDI Resolution: No Maximum HDMI Resolution: Yes SmallHD Wireless Camera Control Port: UHDp30 Receiver Connectivity: Zero delay  What's In The Box? Bolt 6 Monitor Module 750 RX V-Mount HDMI Adapter Bolt 4K RX Monitor Module    

  Bolt 6 LT is a wireless video transmission system that supports up to 1080p60 10-bit 422 HDR video over 3G-SDI, or 4K30 over HDMI. Bolt 6 uses Teradek’s patented Zero-Delay silicon chip to send wireless video over 5GHz and 6GHz radio frequencies. Bolt 6 LT Sets offers three line-of-sight options: 750 ft., 1500 ft., and the MAX model, which can be configured for up to 5,000 ft when using the optional Array Antenna and Broadcast Mode. In the MAX model, Broadcast Mode also allows users to increase the number of Receivers from 6 per Transmitter to unlimited per Transmitter. The 750 model includes V (vertical) antennas. 1500 and MAX models include both V antennas and H (horizontal) antennas. H antennas are designed to maximize signal robustness in the most challenging RF environments. Optionally, the 750 model of Bolt 6 LT can include permanent internal antennas to allow for reliable zero-delay transmission in a more compact and durable form factor. Kit options include the Transmitter and Receiver by themselves or within a Deluxe kit that also includes Gold or V-Mount Battery plates. Bolt 6GHz HIGHLIGHTS 12 new 40MHz wide channels from 5.925 to 6.425GHz Enhanced long-range image quality algorithm New SDI pattern tool to monitor SDI signal quality Pairs with up to 6 receivers, or unlimited receivers when used in Broadcast mode with the MAX models Universal compatibility with all Bolt 6 and Bolt 4K Series AES-256 encryption and RSA 1024 key pairing prevents unauthorized access Features Receive Wireless Video up to DCI 4K Zero-Delay wireless video (<0.001sec) 750 feet of range 4K HDR with 10-bit 4:2:2 Transmit 4Kp30 with HDMI; 1080p60 with SDI Gold & V-Mount Battery Plate options 4x Internal 2dBi Antennas Technical Specs Range: 750ft/ 228m LOS Video Inputs: 1x 3G-SDI SMPTE 424M standard/75 Ω, 1x HDMI Type-A receptacle* 1x Loop-out 3G-SDI on Transmitter Video Outputs: 1x 3G-SDI SMPTE 424M standard/75 Ω, 1x HDMI Type-A receptacle SDI ancillary Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: HDMI to SDI (4Kp23.98/30 HDMI input is scaled and looped out as 1080p23.98/30 on SDI loopout) Power Input: 2-pin Connector 6-28 VDC Power Consuption: TX: 9 Watts; RX: 11 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels) Dimensions Transmitter: 7,2 x 12 x 3,3 cm Dimensions Receiver: 12,2 x 10,6 x 2,7 cm Weight: Transmitter: 212g Weight: Receiver: 304 Multiple mounting options with M3 and 1/4" holes Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30 (HDMI only) 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz 5.755 ~ 5.795 GHz 5.945 ~ 6.425 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz  What's In The Box? 1 x Bolt 6 LT 750 TX Int. Antennas 1 x Bolt 6 LT 750 RX V-Mount Int. Antennas 1 x Lightstand Adapter ¼-20in 1 x Hot Shoe Adaptor 1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable2 x SDI - BNC to BNC Cable, 10in 1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft Cable 1 x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable    

  Bolt 6 LT is a wireless video transmission system that supports up to 1080p60 10-bit 422 HDR video over 3G-SDI, or 4K30 over HDMI. Bolt 6 uses Teradek’s patented Zero-Delay silicon chip to send wireless video over 5GHz and 6GHz radio frequencies. Bolt 6 LT Sets offers three line-of-sight options: 750 ft., 1500 ft., and the MAX model, which can be configured for up to 5,000 ft when using the optional Array Antenna and Broadcast Mode. In the MAX model, Broadcast Mode also allows users to increase the number of Receivers from 6 per Transmitter to unlimited per Transmitter. The 750 model includes V (vertical) antennas. 1500 and MAX models include both V antennas and H (horizontal) antennas. H antennas are designed to maximize signal robustness in the most challenging RF environments. Optionally, the 750 model of Bolt 6 LT can include permanent internal antennas to allow for reliable zero-delay transmission in a more compact and durable form factor. Kit options include the Transmitter and Receiver by themselves or within a Deluxe kit that also includes Gold or V-Mount Battery plates. Bolt 6GHz HIGHLIGHTS 12 new 40MHz wide channels from 5.925 to 6.425GHz Enhanced long-range image quality algorithm New SDI pattern tool to monitor SDI signal quality Pairs with up to 6 receivers, or unlimited receivers when used in Broadcast mode with the MAX models Universal compatibility with all Bolt 6 and Bolt 4K Series AES-256 encryption and RSA 1024 key pairing prevents unauthorized access Features Receive Wireless Video up to DCI 4K Zero-Delay wireless video (<0.001sec) 750 feet of range 4K HDR with 10-bit 4:2:2 Transmit 4Kp30 with HDMI; 1080p60 with SDI Gold & V-Mount Battery Plate options 4x Internal 2dBi Antennas Technical Specs Range: 750ft/ 228m LOS Video Inputs: 1x 3G-SDI SMPTE 424M standard/75 Ω, 1x HDMI Type-A receptacle* 1x Loop-out 3G-SDI on Transmitter Video Outputs: 1x 3G-SDI SMPTE 424M standard/75 Ω, 1x HDMI Type-A receptacle SDI ancillary Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: HDMI to SDI (4Kp23.98/30 HDMI input is scaled and looped out as 1080p23.98/30 on SDI loopout) Power Input: 2-pin Connector 6-28 VDC Power Consuption: TX: 9 Watts; RX: 11 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels) Dimensions Transmitter: 7,2 x 12 x 3,3 cm Dimensions Receiver: 12,2 x 10,6 x 2,7 cm Weight: Transmitter: 212g Weight: Receiver: 304 Multiple mounting options with M3 and 1/4" holes Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30 (HDMI only) 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz 5.755 ~ 5.795 GHz 5.945 ~ 6.425 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz  What's In The Box? 1 x Bolt 6 LT 750 TX 1 x Bolt 6 LT 750 RX 1 x Lightstand Adapter ¼-20in 1 x Hot Shoe Adaptor 1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable2 x SDI - BNC to BNC Cable, 10in 1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft Cable 1 x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable    

Extending your wireless video system is affordable and flexible with DwarfConnection's additional receivers. Add as many as you want, mix and match as you like! ​Depending on which transmitter you are using, the X.LINK.S1 can receive signals from up to 500 meters away. Features Zero-Delay wireless video (<0.001sec) Up to 1080p60 Inputs: 3G-SDI, HDMI Outputs: 3G-SDI, HDMI Receiver with Antenna Cap Rec Trigger: HD-SDI and HDMI (with limitations) Compatible with all NON-DFS-WHDI-Systems, also from other manufacturers DSC Scan: Built-in frequency scanner (via HDMI) Technical Specs Range: 4000ft/ 1000m LOS Video Inputs: Wireless Video Outputs: 2x 3G-SDI, 1x HDMI Type-A SDI and HDMI Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Record Trigger: via SDI and HDMI Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: Yes, HDMI to SDI Power Input: 4-pin Connector 7.2-18 V DC Power Consuption: RX: 8 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto (only INDOOR USE allowed) DC-SCAN via HDMI for channel selection before use necessary Dimensions Receiver 14,8 x 10,0 x 2,2 cm Weight: Receiver: 376,6g Multiple mounting options with 1/4" holes Configuration Interface: Oled dispay via 3 buttons Support Resolutions: 1080p 23.98/24/25/29.97/30/50/59.94/60 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i59.94 Wireless Non-DFS Frequencies: 5550, 5590, 5630, 5670, 5150, 5190, 5230, 5270, 5310, 5510  What's In The Box? 1 x Dwarf Link S.MKII Receiver 1x 4pin - DTap Cables 2x AC Adapter 1x Magicarm 1/4"-20 - 1/4"-20 DFS: NO Frequency Selection, only manual channel selectionNOTE: Because of the non-DFS / only manual channel selection these devices (Dwarf connection, Hollyland, CVW,...) are allowed for indoor use only!ONLY CH5 (5190) and CH6 (5230) are allowed for outdoor use.  

The DC-Link- ULR1 is a high-performance WHDI video transmission system which transmits uncompressed video and audio signals up to 1200m with low latency (1 ms delay). Due to the conscious decision not to implement DFS (Dynamic Frequency Selection), which is compulsory for outdoor use, the device has a longer range, greater stability and better usability than comparable systems. The transmitter and receiver both have 3G-SDI and HDMI connectors. When a video source is attached, the transmitter automatically selects the input (SDI is prioritised). The receiver’s 3G-SDI and HDMI outputs can be used simultaneously. Features Zero-Delay wireless video (<0.001sec) Up to 1080p60 Inputs: 3G-SDI, HDMI 1.4 Outputs: 3G-SDI, HDMI 1.4 V-Mount Battery Plate option for Receiver Rec Trigger: HD-SDI and HDMI (with limitations) Compatible with all NON-DFS-WHDI-Systems, also from other manufacturers DSC Scan: Built-in frequency scanner (via HDMI) Technical Specs Range: 4000ft/ 1200m LOS up to 8200feet / 2500m with RX Patch Antenna RE-2 Video Inputs: 1x 3G-SDI, 1x HDMI 1.4 Type-A receptacle* 1x Loop-out 3G-SDI on Transmitter Video Outputs @ RX: 2x 3G-SDI, 1x HDMI 1.4 Type-A receptacle SDI and HDMI Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Record Trigger: via SDI and HDMI Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: Yes, HDMI to SDI Power Input: 4-pin Connector 7.2-18 V DC or via integrated V-Mount plate Power Consuption: TX: 8 Watts; RX: 8 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto (only INDOOR USE allowed) DC-SCAN via HDMI for channel selection before use necessary Dimensions Transmitter (without Antennas): 14,4 x 7,5 x 2,1 cm Dimensions Receiver (without Antennas): 14,8 x 7,5 x 2,1 cm Weight: Transmitter: 380g Weight: Receiver: 540g Multiple mounting options with 1/4" holes Configuration Interface: Oled dispay via 3 buttons Support Resolutions: 1080p 23.98/24/25/29.97/30/50/59.94/60 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i59.94 Wireless Non-DFS Frequencies: 5550, 5590, 5630, 5670, 5150, 5190, 5230, 5270, 5310, 5510  What's In The Box? 1 x Dwarf ULR1.MKII Transmitter 3 x Flexible Sword Antennas 1 x Dwarf ULR1.MKII Receiver V-Mount 6 x RX Omnidirectional Rod Antannas 2x 4pin - DTap Cables 2x AC Adapter 1x Magicarm 1/4"-20 - 1/4"-20 1x USB flash drive with manual 1x Quick Start Quide 1x Case DFS: NO Frequency Selection, only manual channel selectionNOTE: Because of the non-DFS / only manual channel selection these devices (Dwarf connection, Hollyland, CVW,...) are allowed for indoor use only!ONLY CH5 (5190) and CH6 (5230) are allowed for outdoor use.

Extending your wireless video system is affordable and flexible with DwarfConnection's additional receivers. Add as many as you want, mix and match as you like! Depending on which transmitter you are using, the X.LINK.L1 can receive signals from between 500 and 1200 meters away.   Features Zero-Delay wireless video (<0.001sec) Up to 1080p60 Inputs: 3G-SDI, HDMI Outputs: 3G-SDI, HDMI V-Mount Battery Plate option for Receiver Rec Trigger: HD-SDI and HDMI (with limitations) Compatible with all NON-DFS-WHDI-Systems, also from other manufacturers DSC Scan: Built-in frequency scanner (via HDMI) Technical Specs Range: 4000ft/ 1200m LOS up to 8200feet / 2500m with RX Patch Antenna RE-2 Video Inputs: Wireless Video Outputs: 2x 3G-SDI, 1x HDMI Type-A SDI and HDMI Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Record Trigger: via SDI and HDMI Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: Yes, HDMI to SDI Power Input: 4-pin Connector 7.2-18 V DC or via integrated V-Mount plate Power Consuption: RX: 8 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto (only INDOOR USE allowed) DC-SCAN via HDMI for channel selection before use necessary Dimensions Receiver (without Antennas): 14,8 x 10,0 x 2,0 cm Weight: Receiver: 540g Multiple mounting options with 1/4" holes Configuration Interface: Oled dispay via 3 buttons Support Resolutions: 1080p 23.98/24/25/29.97/30/50/59.94/60 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i59.94 Wireless Non-DFS Frequencies: 5550, 5590, 5630, 5670, 5150, 5190, 5230, 5270, 5310, 5510  What's In The Box? 1 x Dwarf ULR1.MKII Receiver V-Mount 6 x RX Omnidirectional Rod Antannas 1x 4pin - DTap Cables 2x AC Adapter 1x Magicarm 1/4"-20 - 1/4"-20 DFS: NO Frequency Selection, only manual channel selectionNOTE: Because of the non-DFS / only manual channel selection these devices (Dwarf connection, Hollyland, CVW,...) are allowed for indoor use only!ONLY CH5 (5190) and CH6 (5230) are allowed for outdoor use.  

"C" stands for compact - and that is what CLR2 is all about. Wireless video with no external antennas, it is small and pracitcal. Its transmission range of 300m makes it ideal for film sets and similar production environments. Features Zero-Delay wireless video (<0.001sec) Up to 1080p60 Inputs: 3G-SDI, HDMI 1.4 Outputs: 3G-SDI, HDMI 1.4 V-Mount Battery Plate option for Receiver Rec Trigger: HD-SDI and HDMI (with limitations) Compatible with all NON-DFS-WHDI-Systems, also from other manufacturers DSC Scan: Built-in frequency scanner (via HDMI) Technical Specs Range: 300ft/ 1000m LOS Video Inputs: 1x 3G-SDI, 1x HDMI 1.4 Type-A receptacle* 1x Loop-out 3G-SDI on Transmitter Video Outputs @ RX: 2x 3G-SDI, 1x HDMI 1.4 Type-A receptacle SDI and HDMI Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Record Trigger: via SDI and HDMI Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: Yes, HDMI to SDI Power Input: 4-pin Connector 7.2-18 V DC or via integrated V-Mount plate Power Consuption: TX: 8 Watts; RX: 8 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto (only INDOOR USE allowed) DC-SCAN via HDMI for channel selection before use necessary Dimensions Transmitter (without Antennas): 13,1 x 7,2 x 2,2 cm Dimensions Receiver (with Antennas): 14,1 x 10,0 x 2,2 cm Weight: Transmitter: 380g Weight: Receiver: 540g Multiple mounting options with 1/4" holes Configuration Interface: Oled dispay via 3 buttons Support Resolutions: 1080p 23.98/24/25/29.97/30/50/59.94/60 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i59.94 Wireless Non-DFS Frequencies: 5550, 5590, 5630, 5670, 5150, 5190, 5230, 5270, 5310, 5510   What's In The Box? 1 x Dwarf CLR2.MKII Transmitter 3x Flexible Sword Antennas 1 x Dwarf CLR2.MKII Receiver with Antenna cap 2x 4pin - DTap Cables 2x AC Adapter 1x Magicarm 1/4"-20 - 1/4"-20 1x USB flash drive with manual 1x Quick Start Quide 1x Case DFS: NO Frequency Selection, only manual channel selectionNOTE: Because of the non-DFS / only manual channel selection these devices (Dwarf connection, Hollyland, CVW,...) are allowed for indoor use only!ONLY CH5 (5190) and CH6 (5230) are allowed for outdoor use.

A more powerful and also ultra compact alternative to the stub antennas. Same performance as the Fixed Mushrooms (#DC.X.0019) but way smaller. What's In The Box? #DC.X.0034 2x RX Omnidirectional Rod Antennas  What's In The Box? #DC.X.0015 5x RX Omnidirectional Rod Antennas

Extend your receiver range up to 2500m / 8.202ft What's In The Box? 1x RE Antenna 5x Antenna cable

Circular polarization - when proper alignment of your device is hard to archieve. Very good option for gimbal operation or drone use (indoor). What's In The Box? 2x Flexible Clover Leaf  

Dwarfs standard antennas; light, flexible, powerful. Make sure the flat surface of the antennas is facing the RX direction. What's In The Box? #DC.X.0020 2x Fix Mushroom Antennas   What's In The Box? #DC.X.0023 5x Fix Mushroom Antennas