The 1535 Pro Ultra Kit is a portable and ruggedized digital photographic workstation that is configured with our top-tier DigiSystem products. Based on the DigiPlate Pro tethering plate and housed in our waterproof 1535 DigiCase Pro, the 1535 Pro Ultra Kit is in a league of its own. There is no other 1-case solution in the marketplace that gives you the ability to travel with both a full DSLR camera setup and laptop computer system as does our 1535 Pro Ultra Kit. As all DigiSystem kits, the 1535 Pro Ultra comes with a DigiPlate Pro tethering plate that you can securely mount a laptop and its accessories to. Your entire DigiPlate Pro with computer and accessories can then be mounted inside the 1535 DigiCase Pro allowing you to travel to your next location without having to disassemble your entire system. The 1535 DigiCase Pro is flight ready and Carry-On approved. Each 1535 DigiCase Pro Case’s are equipped with the TrekPak Organizer allowing you to create camera and lens compartments within the case for further organization. Furthermore, the 1535 Pro Ultra kits 1535 DigiCase Pro can be mounted to any c-stand or rolling stand with the quick installation of our Pelican DigiCase Mount (DCM-P). The 1535 Pro Ultra Kit includes a 1535 DigiCase Pro with TrekPak, DigiPlate Pro, a set of our new universal laptop clamps that are compatible with Apple’s newest MacBook Pro Retina and are adjustable from 0.375in – 1.0in, a set of accessory clamps that can accommodate accessories measuring 0.5in – 1.5in in height, a DigiShade Pro, a DigiMouse Pad, DigiLegs, and a DigiBase. Kit Includes: 1535 DigiCase Pro with TrekPak DigiPlate Pro DigiClamps – Laptop Universal DigiClamps – Accessory Universal DigiShade Pro DigiMouse Pad DigiLegs DigiBase  

Our Arca Swiss style quick release plate is machined to mate up with the DigiCamera Plate. If you use an Arca Swiss style quick release system, then pairing this plate with your DigiCamera Plate will mean you will always be ready to go whether shooting tethered handheld or on a tripod. FEATURES Constructed of 6061 T6 aluminum Anodized Black Made in USA  

The Digi Platform is a platform that uses our vDrop System and can be connected to our AXIS Stand, C-Stand, rolling stand, or anything 2″” in diameter. Its a great tool for those who primarliy work out of their case and would prefer to not work on the ground. The Digi Platform is easily height adjustable and be connected or disconnected from a stand incredibly fast, without the use of any tools. The platform provides 22.25″” in length and 13.25″” in depth of working space, enough real-estate for common flight-ready cases like the Pelican 1535 Air Case. Did you know you can change a Digi Platform into a Case Platform? The Digi Platform and Case Platform use identical parts but are assembled differently to meet their specific configurations. By removing the vDrop System, then rotating and reconnecting, you can configure your Digi Platform into a Case Platform or vice-versa. The differences between the two are that the Case Platform has no edges on the top surface and the Digi Platform has edges on all four sides, surrounding any items that are on the surface. Keep in mind that the Digi Platform is specifically designed to hold Pelican 1535 Air Case sized cases, anything larger than 22.25″” x 13.25″” will not fit. Looking for extra storage? The Bottom Drawer for the Case Platform provides 960 cubic inches of storage space. The drawer uses self-closing drawer slides, has a three-digit combo lock to keep your gear safe, and is lined with our black outdoor marine carpet. You can purchase the DigiPlatform by itself or configured with the Bottom Drawer at checkout. Lastly, if youre looking for an easy way to further secure your case to the inside of the Digi Platform, we do offer steel Tie-Down Anchors that hard mount to the Digi Platform and provide four tie-down points for straps of all kinds. The Tie-Down Anchors can be purchased as an Add-On at checkout. Dimensions (WxLxH): 68,6x 58,4x 20,3 cm Weight: 7,3 Kg Material: 5052 and 6061 T6 Aluminum. Stainless Steel Hardware, Black Outdoor Marine Carpet, Powder Coated Black, Black Anodized with INOVATIV's Triple Anodize 8625 Mil-Spec Process Categories: AXIS, AXIS Components, AXIS Health, AXIS Health Components, AXIS Network Rack CabinetsTags: Axis, Digital Techs, DIT’s, Photographers, SteadiCam, Videographers, Work Station What´s in the box: AXIS Case Platform and vDrop Assembly  

The AXIS Drawer can be connected to either the Case Platform or Digi Platform. Measuring in at 20.5″ W x 12″ L x 4″ H, the drawer provides 960 cubic inches of storage space. Outfitted with a three-digit combination lock, self-closing drawer slides, and black outdoor marine carpet. Dimensions (WxLxH): 60,9x 35,5x 15,2 cm Weight: 4 Kg Material: 5052 Aluminum and Powder Coated Black Categories: AXIS, AXIS Components, AXIS Health, AXIS Health Components, AXIS Network Rack CabinetsTags: Axis, Digital Techs, DIT’s, Photographers, SteadiCam, Videographers, Work Station What´s in the box: Drawer, Mounting Hardware  

AXIS DigiStation was created with the traveling adventurer in mind. Whether you are a DIT, Digital Tech, Photographer, on set colorist or in the advertising industry and your work requires shooting full productions while on the road, this setup gives the flexibility to create a smaller, rugged, and more versatile workstation.AXIS DigiStation is a portable workstation that can be kept in the studio or on location. Need to travel with your gear? No problem. Leave the stand and wheels at home and take the modular components with you on the road. The modular components can be easily removed from the stand and packed for travel. If you own INOVATIV’s DigiCase Pro or the 1535 Pro Ultra kit, you can combine it with the AXIS DigiStation for a more versatile and efficient workstation. AXIS DigiStation comes with a DigiPlatform that is an ideal setup for the DigiCase Pro or any product in that size range. The DigiPlatform has edges on all four sides to keep items placed on top secure.A vesa compatible monitor can be attached to the Pro Monitor Mount, which is height adjustable on the riser sections of the AXIS Stand. Whether you like to work with your monitor at eye level or taller, the AXIS Stand’s height adjustability provides you with enough adjustment to find that ideal viewing angle. The Pro Monitor Mount on the stand pin can go as high as 90 inches or as low as 55 inches.The trough attached to the base of the stand provides convenience for gear like battery packs, extra lenses, backup cameras and more. AXIS DigiStation wheels are equipped with INOVATIV’s 8 inch premium quick-release wheel system. Each wheel is comprised of both strong steel adapters and lightweight aluminum caster parts that feature 100% sealed bearings and INOVATIV’s powerful foot brakes. The wheel system was designed to offset the center of gravity for increased stability.The Weight Hanger is a new accessory that can be attached on one of the stand legs. It’s a quick release, spring loaded weight hanger that has a hook to attach 25lb sandbag. Don’t have an AXIS Stand? The AXIS Weight Hanger will fit most industry standard stands that use 1-inch square tubing.Add on: Tie-down Anchors to keep your gear secure when rolling on location.Includes AXIS Stand, Wheel System with Brakes, DigiPlatform, Pro Monitor Mount, Trough, Weight Hanger (25lb weight bag included).DimensionsProduct Weight: 82.5 lb / 37.42kgShip Weight: 92.5 lb / 41.95 kg _______________________________________________________________ Comparison Control Station     AXIS Stand     Wheel System     Trough     Weight Hanger and 25 lb weight bag     Pro Monitor Mount     Camera Mount System Base Station     AXIS Stand     Wheel System     Trough     Weight Hanger and 25 lb weight bag     Pro Monitor Mount     WorkSurface Pro Command Station     AXIS Stand     Wheel System     Trough     Weight Hanger and 25 lb weight bag     Dual Bar with two Pro Monitor Mounts and two Baby Pins     WorkSurface Pro with Top Drawer     Case Platform with Bottom Drawer Digi Station     AXIS Stand     Wheel System     Trough     Weight Hanger and 25 lb weight bag     Pro Monitor Mount     DigiPlatform Stabilizer Station     AXIS Stand     Wheel System     Trough     Weight Hanger and 25 lb weight bag     Case Platform     Tie Down Anchors  

Sometimes you might need the computing power or the screen real estate of an iMac while shooting. The DigiBar secures your iMac or Cinema Display to the DigiPlatePro. Combine that with a DigiBase and you can mount it all on a rolling stand which is very handy on set. FEATURES Works with all generations of aluminum iMacs and Cinema Displays Custom pads ensure a strong grip and protect the surface of your iMac or Cinema Display from scratches Not compatible with the DigiPlate Lite Constructed of 6061 T6 aluminum Anodized Black Made in USA  

The DigiBase (Digisystem) is a baby-pin mount which allows you to mount the DigiPlatePro and DigiPlateLite to anything with a baby-pin including C-stands, light stands, clamps, Magic Arms, etc. There are dozens of existing third-party accessories equipped with baby-pins ready for the DigiPlate. Kit includes the DigiBase, hardware and mounting instructions.  

The DigiBracket is a bracket lets you attach the DigiPlate Pro and DigiPlate Lite directly to the legs of your tripod. Machined from strong and lightweight 6061 aluminum, the bracket keeps your laptop secured and off the ground when you are out shooting solo. FEATURES Attaches a DigiPlate directly to your tripod legs Strong 6061 aircraft grade aluminum construction Compatible with all DigiPlates Constructed of 6061 T6 Aluminum Anodized Black Made in USA.  

The DigiCamera Plate attaches to the bottom of the camera and uses a friction system to keep tether cables from pulling out the dainty connectors that most tether cables are equipped with. The friction system is so effective, you can actually carry the camera around by the tether cable. We have made some minor updates that improve the compatibility of the DigiCamera Plate. The size of the three pass-through cable holes have been increased to 0.5″ L x 0.875″ W and have front entrance points in order to use cables equipped with amplifiers. In addition, there are now 2x 1/4-20 and 2x 3/8-16 threaded holes on the top of the DigiCamera Plate so that third party tripod plates can be connected easily. FEATURES Made from 6061 aircraft grade aluminum Three slot positioning system to fit all DSLR bodies (not compatible with medium or large formate cameras) Optional integrated Arca Swiss style tripod quick release plate Friction system keeps your tether cable in check so you can concentrate on shooting No cumbersome knobs or latches Attaching and removing your tether cable takes just seconds Made in USA  

The DigiCamera Plate attaches to the bottom of the camera and uses a friction system to keep tether cables from pulling out the dainty connectors that most tether cables are equipped with. The friction system is so effective, you can actually carry the camera around by the tether cable. We have made some minor updates that improve the compatibility of the DigiCamera Plate. The size of the three pass-through cable holes have been increased to 0.5″ L x 0.875″ W and have front entrance points in order to use cables equipped with amplifiers. In addition, there are now 2x 1/4-20 and 2x 3/8-16 threaded holes on the top of the DigiCamera Plate so that third party tripod plates can be connected easily. FEATURES Made from 6061 aircraft grade aluminum Three slot positioning system to fit all DSLR bodies (not compatible with medium or large formate cameras) Optional integrated Arca Swiss style tripod quick release plate Friction system keeps your tether cable in check so you can concentrate on shooting No cumbersome knobs or latches Attaching and removing your tether cable takes just seconds Made in USA The Arca Swiss style quick release plate is machined to mate up with the DigiCamera Plate. If you use an Arca Swiss style quick release system, then pairing this plate with your DigiCamera Plate will mean you will always be ready to go whether shooting tethered handheld or on a tripod. FEATURES Constructed of 6061 T6 aluminum Anodized Black Made in USA  

INOVATIV’s strongest and safest way to transport your DigiPlate Pro or DigiPlate Lite system is now available using Pelican’s 1535 Air Case, the new 1535 DigiCase Pro. The 1535 DigiCase Pro is gasketed, waterproof, dust-tight, extremely durable, and has a telescopic handle and wheels for easy transport. The case is outfitted with brackets to mount both Pro and Lite versions of our DigiPlate inside creating a seamless flight-ready computer / equipment case. A DigiPlate with laptop, and computer accessories connected, will stow securely inside the 1535 DigiCase Pro. Comes standard with TrekPak Organizer.FEATURESA waterproof, rugged and airport friendly travel caseCompatible with DigiPlate Pro and DigiPlate LiteCustom internal brackets hold the DigiPlate in place while the case is closedCan be mounted directly to c-stands or baby pins using our new Pelican DigiCase MountAllows you to pack a DSLR camera and computer system in one travel ready caseMade in USA 

Accessory clamps keep your hard drives and accessories secured to the DigiPlate. The cheese plate design allows the clamps to be positioned in many different configurations. Each clamp is secured to the DigiPlate using large thumb screws making clamping both easy on the fingers and very secure. The custom rubber pads make sure your accessories will not slip out from underneath. Clamps come in two sizes to accommodate most accessories. Clamps come with shims to make them height adjustable.FEATURESTwo sizes of adjustable clamps to cover drives and accessories from .5″ to 1.5″ thickOpen design allows your drives to remain cool and avoid heat build upCustom clamps with specially formulated pads will not let go of your drives or accessoriesCustom stainless steel hardware makes securing the clamps effortlessCompatible with all DigiPlatesClamps come in pairsConstructed of 5052 aluminumAnodized BlackMade in USA 

The DigiClamps – LaCie Rugged accessory clamps keep your LaCie Rugged hard drives secured to the DigiPlate. The cheese plate design allows the clamps to be positioned in many different configurations. Each clamp is secured to the DigiPlate using large thumb screws making clamping both easy on the fingers and very secure. Clamps come in two sizes to accommodate the LaCie Rugged RAID (501-817) or alternatively LaCie Rugged Standard (501-815) external hard drives.FEATURESOpen design allows your drives to remain cool and avoid heat build upCustom clamps designed to be used with LaCie Rugged model external hard drivesCustom stainless steel hardware makes securing the clamps effortlessCompatible with all DigiPlatesClamps come in pairsConstructed of 5052 aluminumAnodized BlackMade in USA 

The DigiClamps – LaCie Rugged accessory clamps keep your LaCie Rugged hard drives secured to the DigiPlate. The cheese plate design allows the clamps to be positioned in many different configurations. Each clamp is secured to the DigiPlate using large thumb screws making clamping both easy on the fingers and very secure. Clamps come in two sizes to accommodate the LaCie Rugged Standard (501-815) or alternatively LaCie Rugged RAID (501-817) external hard drives. FEATURES Open design allows your drives to remain cool and avoid heat build up Custom clamps designed to be used with LaCie Rugged model external hard drives Custom stainless steel hardware makes securing the clamps effortless Compatible with all DigiPlates Clamps come in pairs Constructed of 5052 aluminum Anodized Black Made in USA  

The INOVATIV DigiClamps are designed to provide maximum security and stability for your laptop while mounted on the INOVATIV DigiPlate. These versatile clamps offer a customizable solution that adapts to almost any laptop size, making them a must-have accessory for professionals who need reliable equipment when working on set, in the studio, or on location. Crafted with precision, the DigiClamps feature a cheese plate design that allows for adjustable positioning, so they can be perfectly aligned to fit a wide variety of laptops. Whether you’re using a MacBook Pro with Touch Bar or another device, these clamps can accommodate laptops ranging in height from 0.375 inches to 1.0 inch, making them incredibly versatile for professionals who work with multiple devices. Installation is made simple with large thumb screws, allowing you to quickly secure the clamps to the DigiPlate without the need for extra tools. These screws are designed to be user-friendly, making the process easy on your fingers while still providing a firm, locked-in hold. Once in place, the custom rubber pads ensure your laptop won’t slip or slide, even during intensive use. The pads are specially formulated to grip the laptop without causing any damage to its surface. The DigiClamps come in pairs and are constructed from high-grade 5052 aluminum, known for its durability and resistance to wear. The clamps are anodized in black for a sleek, professional appearance, and the stainless steel hardware ensures long-lasting performance in various environments. As with all INOVATIV products, the DigiClamps are proudly made in the USA, maintaining the high standards of quality and craftsmanship that professionals expect. Key Features Universal fit: Adjustable clamps accommodate virtually any laptop up to 15 inches in width, including Apple’s latest MacBook Pro with Touch Bar. Durable construction: Made from 5052 aluminum with a black anodized finish for long-term durability and professional aesthetics. Secure grip: Specially formulated rubber pads ensure a non-slip, secure hold for your laptop without damaging its surface. Easy installation: Large thumb screws make clamping fast, easy, and secure without the need for tools. Versatile: Compatible with all INOVATIV DigiPlates, making it ideal for professionals who frequently switch setups or use multiple devices. High-quality hardware: Custom stainless steel components provide a secure hold while allowing for easy adjustments. Made in the USA: Designed and manufactured in the USA, ensuring top-quality craftsmanship. The INOVATIV DigiClamps are perfect for photographers, filmmakers, digital techs, and other professionals who need to keep their laptops safe and secure during shoots or production work. Whether you’re on location or in the studio, DigiClamps deliver the peace of mind that your equipment is stable, protected, and ready for action.

The DigiClamps for the Apple MacBook Air are specific to this model computer. Due to the tilted surface of the MacBook Air, our Universal Laptop clamps are not compatible. However, the DigiClamps for MacBook Air fit perfect and give you the added security and trust knowing your computer is secured to the DigiPlate.FEATURESCustom clamps with specially formulated pads will not let go of your laptopCustom stainless steel hardware makes securing the clamps effortlessCompatible with all DigiPlatesClamps come in pairsConstructed of 5052 aluminumAnodized BlackMade in USA 

The DigiHanger (Inovativ DigiSystem) can perform multiple tasks. First, it becomes a great anchor point to add to the bottom of your DigiPlate as a means to hang cables, accessories, etc. Second, it also has the same design characteristics as the cable management system that is built-in the DigiPlate Pro. Since the DigiPlate Lite does not have a cable management system, the DigiHanger can be added to the bottom of the plate to be used for cable management to prevent tether cables from being pulled out of ports. FEATURES Adds an anchor point to your DigiPlate to hang, tie, or lock items Can be used for cable management to prevent cables from being accidentally pulled from ports Works with all DigiPlate’s Constructed of 6061 T6 aluminum Anodized Orange Made in USA  

The DigiLegs transform the DigiPlate Pro and Lite into a working table. This is especially handy when you have items like the DigiBase and hard drives mounted to the bottom of the DigiPlate. Those items make the bottom uneven when not mounted on a stand or a tripod. The legs elevate the plate, clearing space for items attached below. The bottom of the legs have rubber pads to prevent scratches on delicate surfaces. FEATURES Evens out the DigiPlate bottom surface once you have accessories and components attached Great if you need to set the DigiPlate on a wet or nasty surface Compatible with all DigiPlates Constructed of 6061 T6 aluminum Anodized Black Made in USA  

For some people, a laptops trackpad can really cramp your style. The DigiMousePad is an extension that attaches to either side of the DigiPlatePro and or Lite and gives you a surface for a traditional mouse. FEATURES Adds a nice mouse pad surface extension to the DigiPlate Pro and DigiPlate Lite (Digisystem) Great addition when used in conjunction with the DigiBar or DigiShade Pro Custom pad surface lets your mouse glide with ease Reversible for either left or right hand use Constructed of 6061 T6 aluminum Anodized Black Made in USA  

The DigiPlate Lite is our most compact “cheese plate” design. With 21 holes tapped with the very common 3/8-16 thread size, the DigiPlate Lite is nearly just as expandable as our DigiPlate Pro. The DigiPlate Lite can be assembled or disassembled depending on your travel needs. All accessories are sold seperatley or by the kit. FEATURES Constructed of 6061 T6 aluminum 17.50 x 11.125 x 0.250 inches, and weighs approximately 1.5 lbs 21 tapped holes with industry standard 3/8-16 thread size Can be mounted directly to tripod legs using the optional DigiBracket Can be mounted directly to an Arca Swiss type tripod head using the Easy Release Plate Works with many other off-the-shelf products including lightstands, clamps, and tripods Easily disassembles for compact transport Made in USA  

The DigiPlate Pro is the foundation of all DigiSystem products. It is based on the tried and true “cheese plate” design used by professional photographers and cinematographers. With 161 holes tapped with the very common 3/8-16 thread size, the DigiPlate Pro is virtually limitless when it comes to expandability. All accessories are sold seperatley or by the kit. The DigiPlate Pro comes with one 3/8-16 to 1/4-20 step-down bushing to work seamlessly with tripod’s or tripod plate’s that use a 1/4-20 sized bolt. FEATURES Constructed of 6061 T6 aluminum 17.50 x 11.125 x 0.250 inches, and weighs approximately 4 lbs 161 tapped holes with industry standard 3/8-16 thread size Multiple mounting solutions available Can be mounted directly to tripod legs using the optional DigiBracket Can be mounted directly to an Arca Swiss type tripod head using the Easy Release Plate Works with many other off-the-shelf products including lightstands, clamps, and tripods Made in USA  

The DigiShade Pro is a fully built “Tent Like” shade that easily connects to the DigiPlate Pro. It is fully collapsible for easy storage and assembles quickly. One of the biggest challenges of tethered photography is battling the sun and other light sources. The DigiShade Pro features an ultra lightweight aluminum frame that attaches right to the DigiPlate Pro.   The shade contains 4 internal pockets for equipment storage, i.e. hard drives and card readers. The water repellent Cordura shade features a pop out rear back to allow for tilting your laptop display and also a removable front viewing panel for those ultra sunny locations like the beach and snow. FEATURES Strong and lightweight aluminum frame Frame is removable and collapses for transport Shade is constructed of water repellent 400 Denier Corder fabric DigiShade Pro comes with an optional front door for ultra darkness, and attaches securley to the DigiPlate Pro in seconds Made in USA  

The Easy Release Plate (ERP) is made to work with the DigiCase Mount, DigiPlate Pro and DigiPlate Lite. This is the same plate that comes with the DigiCase Mount kit. Extra ERP’s come in handy to keep different mounts at the ready so switching from a tripod to a c-stand can be done in a few seconds. The 2016 ERP has been redesigned to work seamlessly with Arca Swiss style tripod heads. FEATURES Constructed of 6061 T6 aluminum Anodized Black Compatible with Arca Swiss type tripod heads Includes 2 Thumbscrews Made in USA  

The Lite Kit, is a combination of our Lite DigiSystem products proven to be basic essentials. Keep this simple system mounted to a rolling stand, C-Stand, tripod or packed in a backpack for a very efficient super compact workstation. The Lite Kit includes a DigiPlate Lite, our new universal DigiClamps that are compatible with Apple’s newest MacBook Pro Retina and are adjustable from 0.375in – 1.0in, and DigiBase. Alternatively with DigiBracket (LK-0002).