Next generation camera with forward thinking full frame sensor, phenomenal color science and user-friendly operation Simple and intuitive Usability and reliability of the camera is one of the major concerns for operators, especially in tough or time-critical filming conditions. With a user-friendly design, clear and simple menu navigation, and a highly durable, reliable construction, VENICE lets you simply concentrate on filming, and not the camera. Full-Frame sensor for cinema VENICE features an all-new Full-Frame sensor with the classic 36 x 24-mm dimensions that have been a staple of photography for over 100 years. Designed exclusively for high-end cinematography, this sensor can capture images up to a maximum resolution of 6048 x 4032. Switchable imager modes mean VENICE can support an unprecedented number of cinematic aspect ratios for complete creative freedom: Full width 36 mm 6K In full-frame, you can use the full 6048 pixel width of the sensor for 6K imager modes such as 3:2, 2.39:1*, 1.85:1, 17:9, and 16.9*. Equivalent to 4-perforation motion picture film, these 6K modes allow for extra-shallow depth of field, super-wide shooting, and other creative effects. Super35 anamorphic 4K For super-wide screen productions, VENICE offers two full-height 2x squeeze anamorphic imager modes that include 6:5 and 4:3 recording modes for 12:5 (known as 2.39:1) and 8:3 (2.66:1) scenes, respectively. Explore how VENICE can meet your production requirements with the firmware and licensing requirements in the aspect ratio chart: Fast shutter VENICE’s high-speed readout sensor minimizes the jello effect typical in CMOS sensors. Phenomenal latitude VENICE has an exceptional 15+ stops of latitude, with low noise for extraordinary performance in delivering phenomenal images in conditions from searing sunlight to almost no light. VENICE’s real-world performance also excels at High Dynamic Range imaging and allows unprecedented creative freedom in grading. More colors for more expression VENICE can exceed Rec. 2020 color space. This means the color range is wider than DCI-P3 and can beautifully reproduce the true color of the scene in front of your lens. This also provides the broad palette in the grading suite using the established workflow of Sony’s third-generation LOG gamma encoding (S-Log3) and ultra-wide color space. More colors for more expression VENICE can exceed Rec. 2020 color space. This means the color range is wider than DCI-P3 and can beautifully reproduce the true color of the scene in front of your lens. This also provides the broad palette in the grading suite using the established workflow of Sony’s third-generation LOG gamma encoding (S-Log3) and ultra-wide color space. Dual Base ISO VENICE has a base ISO of 500 to provide the optimal dynamic range for typical cinematography applications with on-set lighting. A secondary High Base ISO of 2500 excels in low-light High Dynamic Range capture, with an exposure latitude from 6 stops over to 9 stops under 18% Middle Gray, for a total of 15 stops. High Base ISO 2500 is ideal whenever you’re using slow lenses or shooting dimly-lit environments. Combining ISO2500 with VENICE’s internal eight-step Optical ND filter system offers the ability to emulate different ISOs while maintaining maximum latitude of +6 and -9 stops, enabling you to use VENICE as an ISO1250 camera. World’s first 8-step mechanical ND Filters VENICE is the world’s first camera of its class with a servo-controlled 8-step mechanical ND filter mechanism built into the camera chassis. It offers a massive ND of 0.3 (1/2 = 1 stop) to ND2.4 (1/256 = 8 stops) range that reduces time lost on set changing external filters. The ND filters also greatly increase VENICE’s flexibility when being controlled remotely on drones and cranes, or in an underwater housing. Next generation viewfinder The DVF-EL200 was created as the perfect partner for VENICE. A 1920 x 1080 OLED panel enables precise, high-resolution focusing and framing, including False Color Display at the touch of a button. A rotary encoder provides instant access to brightness, peaking and contrast. An all-new ergonomic design allows for tool-free attachment/detachment and reconfiguring within seconds. The industry-standard LEMO connector offers exceptional durability. Engineered to survive VENICE’s chassis is engineered to be amazingly robust and has been rigorously tested in the harshest conditions. Its ventilation system is completely isolated from all electronic components to prevent ingress of dust, sand and splash. The silent-running fan can be cleaned or even swapped out on set quickly and easily. Easily configurable VENICE has a fully modular design and even the sensor block is interchangeable. So, as sensor technology advances in far future, you have the opportunity to upgrade without investing in a new camera. In order to maintain ergonomic balance for operators, the top handle and viewfinder are easily adjustable. As the height of the camera from the bottom to the optical center of the lens mount is the same as the F55, base plates and other accessories used for the F55 can be used with VENICE. The AXS-R7 recorder can be attached to VENICE with just four screws. Additional features of the Venice camera: native PL- and E-mount (Lever lock type) anamorphic aspect ratios of 4:3 and 6:5 at 4K for shooting both 2.4:1 and 2.66:1 widescreen desqeeze function on monitor out for several anamorphic squeeze factors up to 16bit of tonal range when recording in RAW or X-OCN (16-bit eXtended tonal range Original Camera Negative) file formats downsampling from Full Frame Image with 6K resulution to 4K XAVC codec parallel recording of Proxy Files or XAVC on SxS cards while recording 6K (RAW or X-OCN) on AXS cards the Select FPS function lets you choose frame rates from 1 frame per second to as high as 120 fps, depending on imager mode. *Note: higher Framerates than 60fps require the HFR License available from summer 2019 several control tools for checking aperture an focus such as: up to 4.0x Dot-by-Dot magnification of the viewfinder image, Surround View (Look Around), High/Low Key, USER 3D LUTs, ACES compatibility Full menu control via web browser based wired and wireless connection and much more... More information about the Sony VENICE can be found at www.sonycine.com Download Technicolor Look Collection for VENICE here.
IB/E Optics Raptor T2.9 100mm Cine Macro Lens - UMS PL Mount The RAPTOR lenses featuring full frame (24×36) coverage and beyond, 1:1 magnification, T-Stop 2.9 as well as robust and durable professional cine mechanics. Features: Maximum magnification 1:1 No change in length, thanks to internal focusing extended color correction (APO) Aperture T 2.9-T22 Constistent distance from flange to iris- and focusring Front diameter of 95 mm M0.8 gear wheels for focus and iris UMS PL Mount (LPL, Canon EF, Sony NEX E,...) Robust and durable mechanical design Data sheet downloadAPO CINE MACRO LENS FAMILY
IB/E Optics Raptor T2.9 60mm APO Cine Macro VV Lens - UMS PL Mount All RAPTOR lenses featuring full frame (24x36) coverage and beyond, 1:1 magnification, max T-Stop 2.9 as well as robust and durable professional cine mechanics. Features: Maximum magnification 1:1 No change in length, thanks to internal focusing extended color correction (APO) Constistent distance from flange to iris- and focusring Front diameter of 95 mm M0.8 gear wheels for focus and iris UMS PL Mount (LPL, Canon EF, Sony NEX E, …) Robust and durable mechanical design Data sheet downloadAPO CINE MACRO LENS FAMILY
IB/E Optics Raptor T2.9 150mm Cine Macro Lens - UMS PL Mount The RAPTOR lenses featuring full frame (24×36) coverage and beyond, 1:1 magnification, T-Stop 2.9 as well as robust and durable professional cine mechanics. Features: Maximum magnification 1:1 No change in length, thanks to internal focusing extended color correction (APO) Aperture T 2.9-T22 Constistent distance from flange to iris- and focusring Front diameter of 95 mm M0.8 gear wheels for focus and iris UMS PL Mount (LPL, Canon EF, Sony NEX E,...) Robust and durable mechanical design Data sheet downloadAPO CINE MACRO LENS FAMILY
The M full frame lenses have captured unique, iconic images for over than 60 years around the world. To bring the characteristics of these lenses directly to the cinema world, Leitz Cine Wetzlar designed the new M 0.8 lenses. The complete set contains focals of 21mm, 24mm, 28mm, 35mm, 50mm, 50-N, 75mm and 90mm. The M 0.8 lenses interpret light and skin tones with a unique sense of clarity, color and charisma. FEATURES Focal Length: 35 mm Max. Aperture: f/1.4 Format: Full Frame (24mm x 36mm) Mount: Leica M-Mount Front Diameter: 80mm Weight: 380g CAMERA COMPATIBILITY Sony VENICE ARRI Alexa Mini/Amira RED Monstro and more - see comparative table:
The 1.75″ Accessory Crossbar Clamp enables users to attach a clamp to any of the crossbars to support a 1.75″ mast. FEATURES Machined from 6061 T6 aluminum Only compatible with 1.75″ diameter stands Dimensions: 2.5″L x 2.5″W x 1.5″H Product Weight: 0.5 lb
Add a Ranger style top shelf to your Echo cart. Identical to the same top used on the Ranger, users can freely switch between their top shelves depending on the job on hand. FEATURES Fabricated from 5052 aluminum Shelf connections machined from 6061 T6 aluminum Premium black carpet and black powder coat NOT compatible with Scout model equipment carts Dimensions: Ranger 30 Top Shelf: 30″L x 20″W x 3″H | Ranger 36 Top Shelf: 36″L x 24″W x 3″H | Ranger 48 Top Shelf: 48″L x 24″W x 3″H Product Weight: Ranger 30 Top Shelf: 10 lb | Ranger 36 Top Shelf: 12 lb | Ranger 48 Top Shelf: 15 lbCart: Ranger/Echo
Accessory clamps keep your hard drives and accessories secured to the DigiPlate. The cheese plate design allows the clamps to be positioned in many different configurations. Each clamp is secured to the DigiPlate using large thumb screws making clamping both easy on the fingers and very secure. The custom rubber pads make sure your accessories will not slip out from underneath. Clamps come in two sizes to accommodate most accessories. Clamps come with shims to make them height adjustable.FEATURESTwo sizes of adjustable clamps to cover drives and accessories from .5″ to 1.5″ thickOpen design allows your drives to remain cool and avoid heat build upCustom clamps with specially formulated pads will not let go of your drives or accessoriesCustom stainless steel hardware makes securing the clamps effortlessCompatible with all DigiPlatesClamps come in pairsConstructed of 5052 aluminumAnodized BlackMade in USA
The Voyager EVO with X-Top utilities INOVATIV’s patented SLAS (Self-Locking Adjustable Shelving) system. The SLAS system is the backbone of all INOVATIV carts and enables the user to assemble and collapse the cart effortlessly with its tool-free design. This system also incorporates INOVATIV’s locking top shelf that is height adjustable up to 10″ in 2″ incremental stages. To ensure the Voyager EVO rolls with ease, its equipped with INOVATIV’s premium quick-release dovetail wheel system. Each wheel is easily attached or removed and is comprised of an all aluminum lightweight structure, high strength 100% sealed bearings, and 6″, 8″, or 10″ pneumatic tires. The Voyager EVO is equipped with 2 swivel or “smart” casters mounted with INOVATIV manual foot brakes and 2 fixed casters that can transform to a swivel configuration with the removal of a bolt. Voyager 36 EVO: Inner Tray Size: 35”W x 23.25”L Collapsed: 39.9”W x 24.7”L x 8.25”H Assembled: 39.9”W x 24.7”L x 39.5”H (8” Wheels) 39.9”W x 24.7”L x 40.9”H (10” Wheels) Standard Equipment: 3″ Tall Top Shelf (Voyager 30, 36, 42) 4″ Tall Bottom Shelf 1 Set Quick Grips 2 Accessory Crossbars Foot Brake System 8″ removable sealed bearing aluminum dovetail wheel system (Voyager 30) 8″ or 10″ removable sealed bearing aluminum dovetail wheel system (Voyager 36) 10″ removable sealed bearing aluminum dovetail wheel system (Voyager 42) FEATURES Made in the USA Spring Loaded Latches Completely tool free design Collapses down to slim 8.25″ thick flight ready travel case 20% lighter than other carts currently serving the marketplace Upright posts lock in place and will not loosen over time 10″ of top shelf height adjustment in 2″ increments 100% sealed bearing wheels that are extremely quiet and easy to roll Equipped with INOVATIV’s Foot Brake System Constructed of premium 5052 and 6061 aluminum, 40% Glass Filled Nylon Corners & Hinge Brackets, and stainless steel hardware. Type II and III anodizing on all uprights and machined parts Durable texture black powder coat on top and bottom shelves 5 year limited warranty NEW Spring-loaded latch system for securing your collapsed cart. Optionally, you may add your own padlocks for security NEW Treaded Rail Plates integrated within top shelf. Supports 1/4-20 and 3/8-16 accessory attachments NEW Rubberized release collars on cart posts for easier grip during assembly / disassembly NEW Rivet-free and weld-less construction NEW Thicker transport handle for comfort NEW Side handle cutouts for easier loading/unloading collapsed cart NEW Travel case accessory (coming soon)
The Insight is a monitor mounting system that integrates perfectly with our Apollo equipment carts. It is designed to hold multiple monitors at a time, and offers a wide variety of mounting options. The dual cross tubes deliver stability and strength, maximizing the systems ability to hold multiple monitors and withstand the demands of set life. The Insight collapses down and packs up easily for transportation. FEATURES Currently only available for Apollo carts Extremely strong, stable and rigid design Integrates easily with Apollo workstations Collapses down and packs up easily for transportation Adjustable height with the Insight Riser Tubes and Pro Ultra Arm Vesa Plate Multiple ⅜ threaded holes on Insight Mast Assembly’s and System Brackets for mounting antennas and other accessories Precision machined “Dry” bearings allow for smooth movement along cross tubes Constructed of premium 5052 and 6061 aluminum and stainless steel hardware Anodized Black and Orange – Type II and III anodizing on all uprights and machined parts Durable finish and seal for long term use and smooth operation Lowest position from ground: 58.5 inches (to center of monitor) Highest position from ground: 66.5 inches (to center of monitor)
The DigiCamera Plate attaches to the bottom of the camera and uses a friction system to keep tether cables from pulling out the dainty connectors that most tether cables are equipped with. The friction system is so effective, you can actually carry the camera around by the tether cable. We have made some minor updates that improve the compatibility of the DigiCamera Plate. The size of the three pass-through cable holes have been increased to 0.5″ L x 0.875″ W and have front entrance points in order to use cables equipped with amplifiers. In addition, there are now 2x 1/4-20 and 2x 3/8-16 threaded holes on the top of the DigiCamera Plate so that third party tripod plates can be connected easily. FEATURES Made from 6061 aircraft grade aluminum Three slot positioning system to fit all DSLR bodies (not compatible with medium or large formate cameras) Optional integrated Arca Swiss style tripod quick release plate Friction system keeps your tether cable in check so you can concentrate on shooting No cumbersome knobs or latches Attaching and removing your tether cable takes just seconds Made in USA The Arca Swiss style quick release plate is machined to mate up with the DigiCamera Plate. If you use an Arca Swiss style quick release system, then pairing this plate with your DigiCamera Plate will mean you will always be ready to go whether shooting tethered handheld or on a tripod. FEATURES Constructed of 6061 T6 aluminum Anodized Black Made in USA
The Mantis 30 is revolutionizing the way we move and use larger multimedia displays. Our gas cylinder and braking system work together to insure your monitor moves smoothly with finger tip control and it stays where you leave it. We have used only the highest quality materials and CNC technology to provide you with a perfectly engineered masterpiece that will last a lifetime. This arm works magically with large PC monitors, Apple displays and iMac computers. The Mantis 30 system mounts to any INOVATIV cart using the Monitor Arm Clamps included in the kit. FEATURES Gas assisted monitor arm Machined from 6061 T6 aluminum Variable tension adjustable head Removable 75/100 interface plate Machead adapter available for iMacs & Apple Cinema LED Displays Supports large multimedia displays from 22-35 lb Maximum reach of 20.8in
Our Arca Swiss style quick release plate is machined to mate up with the DigiCamera Plate. If you use an Arca Swiss style quick release system, then pairing this plate with your DigiCamera Plate will mean you will always be ready to go whether shooting tethered handheld or on a tripod. FEATURES Constructed of 6061 T6 aluminum Anodized Black Made in USA
The bottom receiver allows for users to reposition accessories that use a bottom receiver to another side of the cart. Systems such as our Camera Mount and Steadicam System come by default with a bottom receiver that is setup for the swivel wheel side. This accessory would allow individuals to reposition it to the fixed wheel side. FEATURES Machined from 6061 T6 aluminum Anodized Gun-Metal Gray Compatible with 1.75″ Aluminum Mast Dimensions: Short Bottom Receiver: 9″L x 2.5″W x 2.5″H Long Bottom Receiver: 12″L x 2.5″W x 2.5″H Product Weight: 1.5lb
INOVATIV’s Pro Monitor Mount fits most monitors and connects easily to industry standard ⅝” pins, commonly known as “”Baby Pins””. Its compact, lightweight design makes it easy to pack for travel and take it where you need it most. It’s machined aluminum design provides a solid connection to our AXIS Stand, C-Stand, rolling stand, or anything with a ⅝” baby pin. It’s equipped with our 100×100 VESA Plate which fits beautifully on most monitors and gives you the ability to freely rotate the monitor or easily lock it in a Portrait or Landscape position. Additionally, the Pro Monitor Mount has an internal rosette design that keeps your monitor locked in its tilted position, even with heavier monitors. That said, the Pro Monitor Mount has a max weight capacity of 40lb and measures in at 4.50″” W x 5.30″” L x 5.03″” H. Need to mount wireless receivers, transmitters, antennas, or other accessories that connect to a baby pin? A unique feature of the Pro Monitor Mount is that it has a ⅜-16 threaded hole located on the top surface, providing an additional position to mount an extra threaded baby pin. The Pro Monitor Mount is manufactured from premium 6061 aluminum coated with INOVATIV’s Triple Anodize Mil-Spec process, and uses stainless steel hardware. The Pro Monitor Mount is a new INOVATIV design that connects easily to industry standard ⅝” pins, commonly known as Baby Pins. Its compact, lightweight design makes it easy to pack for travel and take it where you need it most. It’s equipped with our standard 100×100 VESA Plate which fits beautifully on most monitors and gives you the ability to freely rotate the monitor or easily lock it in a vertical or horizontal position. Additionally, the Pro Monitor Mount has an internal rosette design that keeps your monitor locked in its tilted position. Have a heavier monitor? The rosette design will keep your monitor in its place no matter what environment you’re in. Lastly, a unique feature of the Pro Monitor Arm is a ⅜-16 threaded hole located on top of the Pro Monitor Mount providing an additional position to mount an extra threaded baby pin. Manufactured using premium 6061 aluminum and stainless steel hardware.
Machined from 6061 T6 aluminum, INOVATIV’s Camera Mount System is lightweight, strong, and adjustable. Using a 1.75″ center mast, any of our camera plates can be connected directly over the top shelf or off to the side. The Camera Mount System has the capability to accept multiple Horseshoes and Camera Plates which allows one system to hold multiple camera configurations. Default system for Echo, Ranger, and Scout carts is configured to be mounted on the swivel wheel / narrow side of the cart. If you prefer otherwise, please specify what side of the cart you prefer the system to be mounted on. Compatible to both sides on Apollo and Voyager carts. FEATURES Machined from 6061 T6 aluminum Mast system allows camera plate to rotate 360 degrees Mast system gives camera plate height adjustability Camera plates are not included Dimensions: 34″L x 7″W x 12″H Product Weight: 7 lb
The DigiBase (Digisystem) is a baby-pin mount which allows you to mount the DigiPlatePro and DigiPlateLite to anything with a baby-pin including C-stands, light stands, clamps, Magic Arms, etc. There are dozens of existing third-party accessories equipped with baby-pins ready for the DigiPlate. Kit includes the DigiBase, hardware and mounting instructions.
The Echo 36 workstation cart from Innovativ is an ideal cart to use on-set, in the studio, or on location to carry and have the equipment within arm's reach, and can also function as a mobile workstation for data management operators. The workstation can be configured to hold several monitors, a laptop, and even mount a camera. This allows the operator on-set to help the cinema photographer manage data more efficiently. The top shelf has 10" of height adjustment in 2" increments. A 2.5" port located on the cart helps to pass through computer and power cables. Also, the Echo's wheels roll easily and are quiet because of the 100% sealed bearings, and the wheels secure by stepping on the manual locking brakes. Should you wish to have an easier and smoother stop for your cart, hydraulic brakes are available separately. Echo 36 Cart size: Collapsed: 22.75″H x 24″W x 36″L Assembled: 39″H x 24″W x 36″L Weight: 93lbs Standard Equipment Top & Bottom Shelf 1 Set Quick Grips 2 Accessory Channel Blocks 2 Accessory Crossbars 2.5 in Cable hole (Echo 36/48 only) Top combo locking drawer w/ soft drawer slides Bottom combo locking drawer w/ soft drawer slidesRolled front lip of top shelf Foot Brake System Hydraulic Brake Systems can be added at time of order but are not standard equipment Features: Made in the USA Completely tools free design Constructed of premium 5052 and 6061 aluminum and stainless steel hardware 30% lighter than other carts currently serving the marketplace Upright posts lock in place and will not loosen over time 10″ of top shelf height adjustment in 2″ increments 100% sealed bearing wheels that are extremely quiet and easy to roll Equipped with INOVATIV’s Foot Brake System Type II and III anodizing on all uprights and machined parts Durable texture black powder coat on top and bottom shelfs 5 year limited warranty
The Echo 48 workstation cart from Innovativ is an ideal cart to use on-set, in the studio, or on location to carry and have the equipment within arm's reach, and can also function as a mobile workstation for data management operators. The workstation can be configured to hold several monitors, a laptop, and even mount a camera. This allows the operator on-set to help the cinema photographer manage data more efficiently. The top shelf has 10" of height adjustment in 2" increments. A 2.5" port located on the cart helps to pass through computer and power cables. Also, the Echo's wheels roll easily and are quiet because of the 100% sealed bearings, and the wheels secure by stepping on the manual locking brakes. Should you wish to have an easier and smoother stop for your cart, hydraulic brakes are available separately. Echo 48 Cart Size: Collapsed: 22.75″H x 24″W x 48″L Assembled: 39″H x 24″W x 48″L Weight: 115lbs Standard Equipment Top & Bottom Shelf 1 Set Quick Grips 2 Accessory Channel Blocks 2 Accessory Crossbars 2.5 in Cable hole (Echo 36/48 only) Top combo locking drawer w/ soft drawer slides Bottom combo locking drawer w/ soft drawer slides Rolled front lip of top shelf Foot Brake System Hydraulic Brake Systems can be added at time of order but are not standard equipment FEATURE Made in the USA Completely tools free design Constructed of premium 5052 and 6061 aluminum and stainless steel hardware 30% lighter than other carts currently serving the marketplace Upright posts lock in place and will not loosen over time 10″ of top shelf height adjustment in 2″ increments 100% sealed bearing wheels that are extremely quiet and easy to roll Equipped with INOVATIV’s Foot Brake System Type II and III anodizing on all uprights and machined parts Durable texture black powder coat on top and bottom shelfs 5 year limited warranty