Mounting

Use this 15mm Studio Support Kit  for both cameras: EOS C300 MKIII and EOS C500 MK II. Included in box: Basic Set for Canon C300 MKIII/ C500 MkII - #KK.0033625 LMB 4x5 Pro Set - #KK.0015177 LMB 4x5 Clamp Adapter Set - #KK.0015133 Follow Focus FF-5 Cine Set Pro - #K0.60144.0 | KK.0005758 Adapter FF-5 for 15mm Studio Support - #K2.47630.0 Lens Support LS-10 for 15mm Studio - #K2.47228.0 Universal Bridge Support UBS-3 - #K2.0013320 Bridge Plate BP-9 - #K2.0031435 Bottom Dovetail Plate 300mm/12in - #K2.0015896 Support Rods 340mm, Ø15mm - #K2.66252.0 Handgrip without on/off switch - #K2.47861.0 Handgrip Extension, long - #K2.47863.0 Shoulder Belt Adapters - #K2.0001223 Rod Mounting Bracket RMB-3 - #K2.0006186  

Use this 19mm Studio Support Kit  for both cameras: EOS C300 MKIII and EOS C500 MK II. Included in box: Basic Set for Canon C300 MKIII/ C500 MkII - #KK.0033625 LMB 4x5 Pro Set - #KK.0015177 LMB 4x5 Clamp Adapter Set - #KK.0015133 Follow Focus FF-5 Cine Set Pro - #K0.60144.0 | KK.0005758 Adapter FF-5 for 19mm Studio Support - #K2.47629.0 Lens Support LS-9 for 19mm Studio - #K2.47227.0 Universal Bridge Support UBS-3 - #K2.0013320 Bridge Plate BP-8 - #K2.0031436 Bottom Dovetail Plate 300mm/12in - #K2.0015896 Support Rods 340mm/13.4in, Ø19mm - #K2.66269.0 Handgrip without on/off switch - #K2.47861.0 Handgrip Extension, long - #K2.47863.0 Shoulder Belt Adapters - #K2.0001223 Rod Mounting Bracket RMB-3 - #K2.0006186  

Includes Top Plate for Canon C500 MkII K2.0033441, Plate for Canon C500 MkII - K2.0033439, Bridge Plate Adapter BPA-5 - K2.0017138, Camera Center Handle CCH-4 - K2.0017270, Sliding Adapter for CCH-4 - K2.0019282, Rod Mounting Bracket RMB-3 - K2.0006186, 15mm Reduction Insert -K2.66255.0, Mini Viewfinder Bracket MVB-1 - K2.0006140, Monitor Bracket - K2.0015520 and Support Rods 340mm, Ø15mm K2.66252.0.The Top Plate for C500 MkII offers a variety of 1/4-20"; 3/8-16" and M4 threads for additional accessory support such as the RMB-3, CCH-4 (CCH-4 Sliding Adapter option) or CCH-2. An integrated optically centered 15mm lightweight support interface allows to mount 15mm rods or the Mini Viewfinder Bracket MVB-1 (K2.0006140). The C500 MkII monitor (via the Monitor Bracket for Canon C200 K2.0015520) or Canons C700 EVF (via K2.0013195 EVF bracket for C700) can be attached to the MVB-1.The K2.0033439 Plate for C500 MkII can be used either shoulder mounted compatible with a VCT-14 style plate such as the QRP-1 or by using the Bridge Plate Adapter BPA-5 to mount the cine-style BP-8, BP-9 or BPS-2. Both versions can be changed easily to the front and the back by sliding and exchanging one against the other without the need to detach any accessories from the camera. The plate includes an interface for two 15mm rods at the front and an optional 15mm lightweight support at the back (15mm rods included).Included in box     1x Top Plate for Canon C500 MkII K2.0033441     1x Plate for Canon C500 MkII - K2.0033439     1x Bridge Plate Adapter BPA-5 - K2.0017138     1x Camera Center Handle CCH-4 - K2.0017270     1x Sliding Adapter for CCH-4 - K2.0019282     1x Rod Mounting Bracket RMB-3 - K2.0006186     1x 15mm Reduction Insert -K2.66255.0     1x Mini Viewfinder Bracket MVB-1 - K2.0006140     1x Monitor Bracket - K2.0015520     1x Support Rods Pair 340mm, Ø15mm K2.66252.0.    

Use this Basic Kit for both cameras: EOS C300 MKIII and EOS C500 MK II. Included in box     1x Plate for Canon C300 MKIII / C500 MK II  - #K2.0033439     1x Bridge Plate Adapter BPA-5 - #K2.0017138      1x Support Rods Pair 340mm, Ø15mm -  #K2.66252.0    

The Noga Arm Pro KIT includes a 10.7" articulating arm that holds up to 10 lb, and three adapters/converters that will allow for broader and more efficient use. The 1/4"-20 Quick Release Adapter is a pull-release adapter with a 1/4"-20 threaded screw on top and 1/4"-20 threaded hole on the bottom. It's made up of two parts that are securely attached together via an M6 stud. The top portion can simply be pulled off, leaving the bottom portion attached wherever you have it attached. This way you can quickly and easily pull your attached accessory/device off without having to unscrew it. The Xchange Cube Adapter has a 6-sided cube design and a threaded hole on each side, featuring three 1/4"-20 and three 3/8"-16 holes in total. The holes run 1/4"-20 to 1/4"-20, 1/4"-20 to 3/8"-16, and 3/8"-16 to 3/8"-16. You can use the Xchange Cube as a converter or extender, or as a stud to hole converter. The 1/4"-20 Female to 3/8"-16 Male Converter offers a 1/4"-20 threaded hole on one end and 3/8"-16 threaded screw on the other. It has a knurled design providing for an easy grip. The articulating arm has a 1/4"-20 screw on both ends and accepts any of the three adapters on either end. It has a central locking ratchet lever that locks the arm in place at once.Box includes:DG9014 - Hold it ArmAD4200 - Head Adaptor & Quick releaseAD2300 - ConverterAD1141 - Xchange Cube

The Noga MG9138 CineArm MG with AD4000 Quick-Release Adapter Kit provides you a flexible accessory support arm with a quick release adapter that allows you to quickly attach or remove accessories. The Noga arm features a central pivot and two ball joints, one on each end. All three of these joints can be simultaneously locked using the single central spring-loaded locking lever. DIMENSIONS Arm:   Top: Male 1/4"-20 plus nut Bottom: Male 3/8" Extended Length: 11.0" (27.9 cm) Maximum Load Capacity: 19.0 lb (8.6 kg) Weight: 1.5 lb (0.7 kg)  

The Noga NF9038 is composed of three-joints that can be quickly and efficiently locked or released using a kip lever-based central mechanism. All three-joints can be simultaneously locked using the single central locking knob. While supporting camera lights and monitors, you can move the arm horizontally or vertically, as well as achieve tilt adjustments to obtain the best possible view. FEATURES Three-joint mounting arm Provides quick and efficient locking or release of arms using a kip lever-based central mechanism Offers simultaneous locking of all three joints via single central locking knob Provides horizontal, vertical as well as tilt adjustments allowing you to obtain the best possible view Equal length on both sides of the arms for increased strength and holding resistance Supports camera lights and monitors  

The LC 9014 from Noga is a rugged, lightweight 3-joint mounting arm with 1/4"-20 screws on both ends that allow you to attach an accessory such as a monitor or light on a camera with a 1/4"-20 female slot. This flexible arm can be easily adjusted as per your requirement and has a load capacity of 4.4 lb. It also features a central locking knob that simultaneously locks all three joints.  

FEATURE Compact All-Aluminum 6-Sided Design Use as Converter or Extender Also Use as Stud-to-Hole Converter 1/4"-20 to 1/4"-2

The DG 9014 arm from Noga is a 3-joint mounting arm with 1/4"-20 screws on both ends that allows you to attach an accessory such as a monitor or light on a camera with a 1/4"-20 slot. This flexible arm can be easily adjusted as per your requirement. It also features a central locking ratchet lever that locks the arm in place. FEATURES Central locking ratchet lever 1/4"-20 screws on both ends Rugged metal design Load capacity of up to 10 lb Anodized black oxide finish  

The Quick Release Adapter from Noga features a pull-to-release top with a 1/4"-20 threaded screw, and on the bottom has a 1/4"-20 threaded hole. The top portion is also outfitted with a non-slip rubber mounting surface for optimal safety and stability. Instead of screwing and unscrewing, simply pull off the top, attach your gear to it, and then easily and securely push it right back in.  

The CS4550 Cine Clamp from Noga is a sturdy, versatile clamp to attach accessories, camera mounts, or Noga-type arms to surfaces up to 45mm. It features a special soft grip that expands onto round and flat surfaces, 6 internal threads, safety pin to prevent the clamp to come apart, two threads for faster movement of the clamp jaws.     Special soft grip thatexpands onto round and flat surfaces up to 45mm.     Safety pin to prevent the clamp to come apart.     Two threads for faster movement of the clamp jaws     Weight: 0,191 kg Features Internal threads     3x1/4"     3x3/8"  

The Noga DG9038 is composed of three-joints that can be quickly and efficiently locked or released using a kip lever-based central mechanism. All three-joints can be simultaneously locked using the single central locking knob. While supporting camera lights and monitors, you can move the arm horizontally or vertically, as well as achieve tilt adjustments to obtain the best possible view. With equal length on both sides, the arm offers increased strength and holding resistance. FEATURES Three-joint mounting arm Provides quick and efficient locking or release of arms using a kip lever-based central mechanism Offers simultaneous locking of all three joints via single central locking knob Provides horizontal, vertical as well as tilt adjustments allowing you to obtain the best possible view Equal length on both sides of the arms for increased strength and holding resistance Supports camera lights and monitors  

The Noga MG9038 is composed of three-joints that can be quickly and efficiently locked or released using a kip lever-based central mechanism. All three-joints can be simultaneously locked using the single central locking knob. While supporting camera lights and monitors, you can move the arm horizontally or vertically, as well as achieve tilt adjustments to obtain the best possible view. With equal length on both sides, the arm offers increased strength and holding resistance. FEATURES Three-joint mounting arm Provides quick and efficient locking or release of arms using a kip lever-based central mechanism Offers simultaneous locking of all three joints via single central locking knob Provides horizontal, vertical as well as tilt adjustments allowing you to obtain the best possible view Equal length on both sides of the arms for increased strength and holding resistance Supports camera lights and monitors  

The Cine Arm DG Hold-It Arm from Noga is a 3-joint mounting arm with 1/4"-20 screws on both ends that allows you to attach an accessory such as a monitor or light on a camera with a 1/4"-20 slot. This flexible arm can be easily adjusted as per your requirement. FEATURES Central locking ratchet lever 1/4"-20 screws on both ends Rugged metal design Load capacity of up to 10 lb Anodized black oxide finish