Matte Box

The Misfit Kick has interchangeable clamp adapters to match the front outer diameter of lenses from 80mm to 143mm in diameter. This clamp adapter lets you clip on the Misfit Kick directly onto lenses, donuts & clamp-on rings which have an 143mm outer diameter.It features our new Frame Safe design that not only has the standard circular cut out but an additional rectangular aperture to maximise the field of view to prevent vignetting, even when using wide lenses with large format sensors without having to use a 6x6"" matte box.Each clamp adapter provides proper clamping force to securely mount to the lens.The 143mm Clamp Adapter can also be used together with our large range of 143mm clamp-on rings for lenses from 80 - 136mm, Rubber bellow donut & Black Hole.The Frame Safe Clamp Adapters are also compatible with the ARRI LMB 4x5, LMB-25, LMB15 & LMB-5.To add rod support for the 143mm Clamp Adapter, you will require the B1235.1002 15mm LWS support bracket.FEATURES Interchangeable Frame Safe Clamp Adapters     Compatible with ARRI LMB 4x5, LMB-25, LMB-15 & LMB-5     Suits lenses with 143mm outer diameter     Compatible with 15mm LWS support bracket     Includes:Frame Safe Clamp Adapter (143mm)

The Misfit Kick has interchangeable clamp adapters to match the front outer diameter of lenses from 80mm to 143mm in diameter. This clamp adapter lets you clip on the Misfit Kick directly onto lenses with an 104mm outer diameter like the Hawk V-Lite, Lomo round front & Schneider Cine-Xenar lenses.It features our new Frame Safe design that not only has the standard circular cut out but an additional rectangular aperture to maximise the field of view to prevent vignetting, even when using wide lenses with large format sensors without having to use a 6x6"" matte box.Each clamp adapter provides proper clamping force to securely mount to the lens. The Frame Safe Clamp Adapters are also compatible with the ARRI LMB 4x5, LMB-25, LMB15 & LMB-5.To add rod support for the Misfit Kick using the 104mm Clamp Adapter, you will require the B1235.1021 15mm LWS Support Extension (100 - 114mm clamps) together with the B1235.1002 15mm LWS support bracket.FEATURES Interchangeable Frame Safe Clamp Adapters    Compatible with ARRI LMB 4x5, LMB-25, LMB-15 & LMB-5    Suits lenses with 104mm outer diameter    Compatible with 15mm LWS support bracket    Includes:Frame Safe Clamp Adapter (104mm)

A set of five hard mattes for the Misfit Kick to add extra flare protection and maintain contrast.Maintain contrast and add extra flare protection with hard mattes for the Misfit Kick.The pack includes five mattes for shooting with each covering a range of focal lengths. Each matte is labelled with low contrast markings to avoid detection when shooting reflective surfaces.The mattes are extremely lightweight, designed to work with or without light shields for maximum flare control, allowing you to remain compact to ensure you are prepared for any scenario.Constructed from high grade ABS sheets and coated with a matte finish on the inside and a UV textured ultra-matte finish on the outside to avoid reflections.FEATURES maximum flare control and increased contrast     Lightweight and rugged construction     Low contrast markings to prevent detection when shooting reflective surfaces         Includes:Hard Mattes (Misfit Kick)

Clip on the Misfit Kick directly onto lenses with an 95mm outer diameter.The Misfit Kick has interchangeable clamp adapters to match the front outer diameter of lenses from 80mm to 143mm in diameter. This clamp adapter lets you clip on the Misfit Kick directly onto lenses with an 95mm outer diameter like ARRI Macro, Zeiss Super Speeds, Kowa Evolution 2x anamorphic primes, Duclos Cine-Mod & Cooke Speed Panchro (S2) lenses.It features our new Frame Safe design that not only has the standard circular cut out but an additional rectangular aperture to maximise the field of view to prevent vignetting, even when using wide lenses with large format sensors without having to use a 6x6"" matte box.Each clamp adapter provides proper clamping force to securely mount to the lens. The Frame Safe Clamp Adapters are also compatible with the ARRI LMB 4x5, LMB-25, LMB-15 & LMB-5.To add rod support for the Misfit Kick using the 95mm Clamp Adapter, you will require the B1235.1022 15mm LWS Support Extension (80 - 95mm clamps) together with the B1235.1002 15mm LWS support bracket.FEATURES Interchangeable Frame Safe Clamp Adapters    Compatible with ARRI LMB 4x5, LMB-25, LMB-15 & LMB-5    Suits lenses with 95mm outer diameter    Compatible with 15mm LWS support bracket    Includes:Frame Safe Clamp Adapter (95mm)

Set up the Misfit Kick for 19mm Studio rod supportSupport the Misfit Kick on 19mm rods when using a large camera and lens configuration.A tool-less 19mm Studio support bracket attaches to either the 15mm LWS support bracket or 15mm LWS swing arm using a 3/8"" lock screw which engages with two locating pins for anti-twist. The bracket has a single lever to lock the rod clamp on both sides, removing the need for a second lever. The 19mm Studio Support Bracket is also compatible with the K2.0013427 - ARRI LMB 15mm Lightweight Support ConsoleFEATURESCompatible with B1235.1002 - 15mm LWS Support Bracket, B1235.1020 - 15mm LWS Swing Away Arm & K2.0013427 ARRI 15mm Lightweight Support ConsoleIncludes:19mm Studio Bracket (Misfit Kick)

Extension piece to adapt the 100, 104, 110, & 114mm Frame Safe Clamp Adapters to the 15mm LWS Support BracketEach Frame Safe Clamp Adapter is configurable for fixed rod support. Depending on the clamp adapter size, you may require a support extension that attaches the clamp adapter to the 15mm LWS support bracket.This support extension is designed for the 100, 104, 110 & 114mm Frame Safe Clamp Adapters and attaches using two screws.The support extensions are height adjustable and set on a guided track. Raising and lowering the extension sets the height position of the matte box and is secured using the set screw.The 15mm LWS Support Bracket attaches to the bottom of the extensions using the two captive screws on the support bracket.It is built from precision cut and anodised from aluminium.FEATURES Compatible with 100, 104, 110 & 114mm Frame Safe Clamp Adapters     Built from hard anodised aluminium     Works with B1235.1002 - 15mm LWS Support Bracket     Compatible with ARRI 15mm Lightweight Support Console     Includes:15mm LWS Support Extension (100 - 114mm clamps)

The 4x5.65" Filter Tray provides a frame to enable you to mount a filter into the Misfit Kick.This filter tray enables you to mount a 4x5.65"" or 4x4"" filter into the frame for use with the Misfit Kick matte box.It features a spring-loaded locking mechanism to securely hold the filter in place. This locking mechanism can be swapped out with the Gripper Module, providing better handling and faster filter changes, particularly when using the matte box in rough environments.It is precision cut from hard-anodized aluminium. The filter tray is also compatible with the ARRI LMB-5, LMB-15, LMB-25 & LMB 4x5.FEATURES Compatible with ARRI LMB 4x5, LMB-25, LMB-15 & LMB-5     Gripper Module compatible     Spring-loaded locking mechanism Includes:4x5.65" Filter Tray

Easily swap out filters by squeezing the trigger when out in the field with the Misfit Kick.This Gripper Tray enables you to mount a 4x5.65"" or 4x4"" filter into the frame for use with the Misfit Kick matte box.The Gripper Tray differs from standard spring-loaded locking mechanism with a squeeze trigger that is much easier to operate, providing better handling and faster filter changes.When using the matte box out in the field, you can still change filters while wearing gloves in rough environments. It is precision cut from hard-anodized aluminium.The filter tray is also compatible with the ARRI LMB-5, LMB-15, LMB-25 & LMB 4x5."FEATURES Easy squeezing action to load and release. Filters     Workable while wearing gloves in outdoor situations     Mounts 4x5.65" or 4x4" filters for the Misfit Kick     Compatible with ARRI LMB 4x5, LMB-25, LMB-15 & LMB-5 Includes:4x5.65" Gripper Tray

Set up the Misfit Kick for 15mm LWS rod support.Add fixed 15mm rod support to the Misfit Kick when using rubber donuts, non-locking lens mounts for extra rigidity.The 15mm LWS Support Bracket attaches to any Frame Safe Clamp Adapter, using two captive screws. The bracket has a single lever to lock the rod clamp on both sides, removing the need for a second lever. The 15mm LWS Support Bracket is also compatible with the ARRI LMB range when using the K2.0014168 Clamp Adapter 143mm"FEATURES Compatible with all Frame Safe Clamp Adapters & ARRI LMB 4x5 143 mm clamp adapter LMB 4x5 Tilt and Flex AdapterK9H9:AH9H9:AP9F9H9:I9F9H9:I9H9:L9 Includes:15mm LWS Support Bracket (Misfit Kick)

The Misfit Kick has interchangeable clamp adapters to match the front outer diameter of lenses from 80mm to 143mm in diameter. This clamp adapter lets you clip on the Misfit Kick directly onto lenses with an 110mm outer diameter like the Cooke 5/i, 7/i, Anamorphic/i, S4/i, Panchro/i Classic (Modern S2/3), Cooke Mini S4/i 18mm, Hawk Anamorphic C-Series, RED Pro Primes & more.It features our new Frame Safe design that not only has the standard circular cut out but an additional rectangular aperture to maximise the field of view to prevent vignetting, even when using wide lenses with large format sensors without having to use a 6x6"" matte box.Each clamp adapter provides proper clamping force to securely mount to the lens.The Frame Safe Clamp Adapters are also compatible with the ARRI LMB 4x5, LMB-25, LMB15 & LMB-5.To add rod support for the Misfit Kick using the 110mm Clamp Adapter, you will require the B1235.1021 15mm LWS Support Extension (100 - 114mm clamps) together with the B1235.1002 15mm LWS support bracket.FEATURES Interchangeable Frame Safe Clamp Adapters     Compatible with ARRI LMB 4x5, LMB-25, LMB-15 & LMB-5     Suits lenses with 110mm outer diameter     Compatible with 15mm LWS support bracket     Includes:Frame Safe Clamp Adapter (110mm)

Misfit Kick is the next generation matte box for all cinematographers. This kit comes ready with three 4x5.65" filter trays and carbon fibre top flag. The Misfit Kick is a versatile matte box for all types of filmmaking. Configurable to clip on, rod mount or swing away.This kit includes the Misfit Kick core, two 4x5.65"" filter trays and the carbon fibre top flag. To complete the system, simply add a Frame Safe clamp adapter to suit your lens and you have a complete matte box ranging from 80mm to 143mm.The clamp adapters use the new Frame Safe design for an extra wide field of view, even when using large format sensors with wide lenses.The Misfit Kick features an all-new patented reveal stage design, making it more robust and easier to operate in the field, converting from a 2-stage to 3-stage matte box without any extra hardware or tools, just a third filter tray.Rather than use ball bearings like traditional matte boxes, the Misfit Kick uses a new spring system in combination with a protruding ridge to secure the filter trays, creating a positive locking position with tactile feedback for increased confidence when loading filters. For even more security, a filter guard can be mounted onto the bottom of the sunshade. When working in fast paced environments like on a tracking vehicle, drone or jib, a safety loop provides a secure tethering point for a safety wire or lanyard. For additional light protection, add the optional top flag, side flag or hard mattes for precise control over flares and image contrast.Knurled, captive locking screws are used to secure filters in place, preventing screws from going missing while in the field. The sunshade is built from high-grade carbon fibre and the reveal system from CNC cut hard anodised aluminium for extra strength while staying lightweight.FEATURES Patented Reveal Stage for tool-less conversion to 3-stage     Works with Frame Safe Clamp Adapters for Misfit Kick and compatible with ARRI clamp adapters     Configurable to clip on, rod mount or swing away on 15mm LWS or 15/19mm Studio supports     Compatible with ARRI filter trays     Includes:B1235.1001 - Misfit Core3x B1251.1042 - 4x5.65"" Filter Tray (Misfit Kick)B1210.1025 - Carbon Fibre Top Flag (Misfit Kick)

Prevent light entering your lens causing flares. With extendable wings, providing complete protection from stray light. The flag can be mounted to the top or bottom of the matte box.This Carbon Fibre Flag mounts to the top or bottom of the matte box, giving you fine control over the light entering your frame. Adding the flag is done in seconds, using the quick release mount, which also secures the flag at the desired angle and packs flat for transport, protecting the lens.With extendable wings, you can protect your image to maintain proper contrast or let light in to add creative flares.The flag is made from carbon fibre to reduce weight, and is coated for maximum durability. The  flag is also compatible as a bottom flag to protect from lens flares when shooting in snow or sandy conditions.FEATURES Strong & lightweight carbon fibre construction     Expandable wings for extra protection     Closes flat against matte box     Compatible with the Misfit Kick, VIV, VIV 5" & Misfit Includes:Carbon Fibre Top/Bottom Flag

The Misfit Atom Pola+ matte box is an ultra lightweight matte box that can accommodate up to two 4×4″ or 4×5.65″ filters and a single 138mm round filter like a circular polariser. A third filter stage, supporting a single 138mm round filter can also be added using the Misfit Atom Pola+ Rota Ring. This kit comes ready for 15mm LWS rod mounting. FEATURES Ultra-lightweight at only 270 grams (~10 oz) Mount up to two 4×4″ or two 4×5.65″ & a single 138mm Circular filter Removeable rubber sunshade Supports +1 & +2 diopters Round filter can rotate up to 120-degrees (Circular Polariser only requires 90-degrees) 143mm Diameter Clamp Configurable to rod mount 15mm LWS rod mount Adaptable to 15mm/19mm Studio rods  

The Misfit Kit 1 comprises of an ultra-light weight two stage 4×5.65 clamp-on matte box, designed to be compact and easily manoeuvrable and it can be expanded to a rod mount or swing away configuration with optional accessories. The Misfit matte box features a patented ‘reveal’ cassette system, which allows you to switch between 2 and 3 stage configuration with no extra parts or tools and all you need is a third tray. Misfit Kit 1 comes with flag mounts and a top flag with variable blades that allow complete freedom in light control and they can be easily twisted and folded to allow you to manoeuvre in tight spaces and allow for efficient storage. The top flag is also compatible as a bottom flag to protect from lens flares when shooting in snow or sandy conditions. The Misfit Kit 1 also comes with a 114mm clamp lens attachment and two 4 x 5.65 horizontal trays to make sure you are ready for instant action. Misfit offers class leading field of view covering up to a 14mm Cooke with 3 PV stages and also works with RED Pro Zooms at 5K and with sensor sizes getting bigger, it’s built to serve you well in to the future. The Misfit Kit 1 is built from high grade carbon fibre, precision cut and hard anodized aluminium, stainless steel and industrial grade plastic   FEATURES Ultra-light weight 4 x 5.65 clamp on matte box which can be expanded to a rod mount or swing away with optional accessories Patented “Reveal” cassette system to switch from 2 stage to 3 stage configuration with no extra parts or tools Top flag compatible as bottom flag for lens flare protection Class leading field of view Inclusive of a 114mm clamp lens attachment for instant action Built from high grade carbon fibre, precision cut and hard anodized aluminium, stainless steel and industrial grade plastic