Craft your image with filters to get the shot you envision. This kit is ready for three 4×5.65” filters, with 15mm LWS Swing Away support for faster lens changes without having to remove the matte box. Independent 360-degree rotating filter stage for use with polarisers, graduated ND & FX filters. Swing away provides clear access to swap lenses & accessories. Compatible with 4×5.65″, 5×5″ or 5.65×5.65″ trays & filters. Offers a wide field-of-view and maximum coverage for cine-servo lenses. Combines with Frame Safe clamp adapters to suit a range of lenses, available in 80-143mm sizes. 360-Degree Rotation The kit includes the expansion pack, with both rear stages offering 360-degrees of rotation, useful for positioning graduated NDs or adding a polariser to reduce glare or reflections. Wide Angle Coverage with support up to 5.65×5.65″ For operators using wide angle cine-servo lenses, the Misfit Kick 360 supports larger 5×5” & 5.65×5.65” trays & filters, removing the risk of vignetting, even when rotating the stage. Frame Safe To complete the system, simply add a Frame Safe clamp adapter to suit your lens available from 80mm to 143mm diameters. It is also compatible with ARRI clamp adapters. British Workmanship Machined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability. The Misfit Kick 360 comes with our famous Bright Tangerine Support and the addition of a 5 year warranty. Weight: 1 kg Dimensions: 35 × 25 × 12 cm

Form a rigid cage around your Canon C70 with a steady foundation, protecting your camera while speeding up transitions between setups. From here, you can accessorise the camera in any way you like using NATO accessories or directly mounting to the helicoil reinforced 1/4” & 3/8” threads. With a lightweight build, the cage improves the filmmaking experience for the Canon C70 whether it is being operated in handheld, tripod or gimbal modes. Each kit comes with the Side Plate, Top Plate, NATO Top Handle, Top Bar Bracket, LeftField 15mm LWS Baseplate (DJI), HDMI Clamp & a set of two 15mm (9” length) Sterling Titanium Drumstix Rods. Versatile mounting options with 1/4”, 3/8”, NATO & QD points. Helicoil reinforced threads to prevent stripping and loosening over time. Patented Open•UP baseplate lets you easily lift off the camera from the dovetail. DJI compatible dovetail lets you move from tripod to gimbal with less weight & low center of gravity. Adjustable top handle provides a balanced grip. Support for Axl EVF mount, lens motors & other 15mm rod mounted accessories on top of camera. Sterling Titanium Drumstix Rods offer rigid support while being ultralight. No Compromises Every part of our Canon C70 LeftField system has been machined and hand-finished in our single factory in Church Crookham. The Advanced Kit comes with our famous Bright Tangerine Support and the addition of a 5-year warranty. Weight: 1 kg  

Articulating Arm. Top: 1/4"-20 Quick Release - Bottom: 1/4"-20 Quick Release - Accepts up to 8.8 lbs of weight. Introducing the Cine Arm QR, an upgraded version of the Noga Hold-it Articulating Arm with the Noga Quick Release factory installed on both ends. The heart of the device is its single central locking knob that simultaneously locks all 3 joints. New & Improved Design It's new, improved central mechanism—a kip lever—is designed to more quickly and easily lock or release the arm's 3 articulated joints. What's more, the new lever provides even greather holding strength. Additionally, the 16x9 Inc. Cine Arm has been redesigned with equal length on both sides of the arm for increased strength and holding resistance. Simple & Easy to Use Noga's rugged, lightweight 3-joint mounting arms have become an essential accessory for the professional cinematographer. Compatible with a wide range of cameras, they attach easily via a standard 3/8" and 1/4"-20 screw, and are simple and ease to use. Supporting a monitor or camera light, the arm can be moved to the left or right of the lens, raised or lowered, and even tilted up or down to provide the clearest view or to get just the right angle for the job. Faster Camera Set-ups Add the 16x9 Inc. Cine Lock to enable fast and easy non-thread mounting and removal of the 16x9 Inc. Cine Arm and its cargo through an ingenious dove tail design. The 16x9 Inc. Cine Lock is made up of two parts, a male and female wedge/dove tail plate. The male is fitted onto the top and bottom of a the 16x9 Inc. Cine Arm. The female piece is attached both to the surface where the arm will be anchored, and onto whatever object the arm will hold. Once all pieces of the device are in place, the arm can easily be mounted onto a camera handle or tripod, for example — and a monitor or light can easily be mounted onto the arm itself. By sliding the dove-tail to the wedge plate, the unit is locked into place.

Articulating Arm. Top: 1/4"-20 Quick Release - Bottom: 1/4"-20 Quick Release. Accepts loads up to 6.6 lb. Introducing the Cine Arm QR Set, an upgraded version of the Noga Hold-it Articulating Arm. The heart of the device is its single central locking knob that simultaneously locks all 3 joints. New & Improved Design It's new, improved central mechanism—a kip lever—is designed to more quickly and easily lock or release the arm's 3 articulated joints. What's more, the new lever provides even greather holding strength. Additionally, the 16x9 Inc. Cine Arm has been redesigned with equal length on both sides of the arm for increased strength and holding resistance. Simple & Easy to Use Noga's rugged, lightweight 3-joint mounting arms have become an essential accessory for the professional cinematographer. Compatible with a wide range of cameras, they attach easily via a standard 1/4"-20 (top) and 1/4"-20 screw (bottom), and are simple and ease to use. Supporting a monitor or camera light, the arm can be moved to the left or right of the lens, raised or lowered, and even tilted up or down to provide the clearest view or to get just the right angle for the job. Faster Camera Set-ups Add the 16x9 Inc. Cine Lock to enable fast and easy non-thread mounting and removal of the 16x9 Inc. Cine Arm and its cargo through an ingenious dove tail design. The 16x9 Inc. Cine Lock is made up of two parts, a male and female wedge/dove tail plate. The male is fitted onto the top and bottom of a the 16x9 Inc. Cine Arm. The female piece is attached both to the surface where the arm will be anchored, and onto whatever object the arm will hold. Once all pieces of the device are in place, the arm can easily be mounted onto a camera handle or tripod, for example — and a monitor or light can easily be mounted onto the arm itself. By sliding the dove-tail to the wedge plate, the unit is locked into place.

Includes: K2.0043699, Top Plate for Sony Venice 1/2 K2.0043726, Plate for Sony Venice 1/2 K2.0043749, Broadcast Shoulder Adapter BSA-1 K2.66252.0, Support Rods 340mm, Ø15mm K2.0017270, Camera Center Handle CCH-4  

Includes: K2.0043699, Top Plate for Sony Venice 1/2 K2.0043726, Plate for Sony Venice 1/2 K2.0043731, Side Bracket Right for Sony Venice 1/2 K2.0043725, Side Bracket Left for Sony Venice 1/2 K2.0043749, Broadcast Shoulder Adapter BSA-1 K2.66252.0, Support Rods 340mm, Ø15mm K2.0017270, Camera Center Handle CCH-4 K2.0021525, EVF bracket for Sony DVF-EL200 (Venice) K2.0006140, Mini Viewfinder Bracket MVB-1  

Includes: K2.0043699, Top Plate for Sony Venice 1/2 K2.0043726, Plate for Sony Venice 1/2 K2.0017138, Bridge Plate Adapter BPA-5 K2.66252.0, Support Rods 340mm, Ø15mm K2.0017270, Camera Center Handle CCH-4  

Includes: K2.0043699, Top Plate for Sony Venice 1/2 K2.0043726, Plate for Sony Venice 1/2 K2.0043731, Side Bracket Right for Sony Venice 1/2 K2.0043725, Side Bracket Left for Sony Venice 1/2 K2.0017138, Bridge Plate Adapter BPA-5 K2.66252.0, Support Rods 340mm, Ø15mm K2.0017270, Camera Center Handle CCH-4 K2.0021525, EVF bracket for Sony DVF-EL200 (Venice) K2.0006140, Mini Viewfinder Bracket MVB-1  

The Easyrig Cheese Plate for Sony Venice on Minimax is a must-have accessory for filmmakers looking to enhance their shooting experience with the Sony Venice camera system. Designed specifically for use with the Easyrig Minimax, this cheese plate provides versatile mounting options and stability for various accessories. The lightweight yet durable construction ensures that the camera remains well-supported while allowing easy access to mounting points for additional gear such as monitors, batteries, and lights.With its smart design, the Easyrig Cheese Plate enables filmmakers to quickly adapt their setups on the fly. Its multiple threaded holes offer flexibility in positioning accessories, making it an essential tool for both studio and on-location shoots. The cheese plate is designed to enhance workflow efficiency while maintaining a professional look, allowing creators to focus on their storytelling without being weighed down by cumbersome equipment.FeaturesCustom-designed for the Sony Venice camera systemCompatible with Easyrig Minimax for seamless integrationLightweight and durable construction for easy handlingMultiple threaded holes for versatile accessory mountingAllows quick adjustments and modifications to setupsEnhances stability for a wide range of filming conditionsStreamlines workflow with efficient organization of equipmentProfessional design to meet the needs of serious filmmakersTechnical SpecificationsMaterial: High-strength aluminumWeight: 0.5 kgDimensions: 20 cm x 15 cm x 2 cmThread sizes: 1/4"-20 and 3/8"-16Compatibility: Sony Venice camera on Easyrig MinimaxDesigned for easy attachment and removalSurface finish: Anodized for durabilityDesigned for professional use in film and video productionDimensions and WeightsWeight: 0.5 kgDimensions: 20 cm x 15 cm x 2 cmPackaged weight: 0.7 kgPackaged dimensions: 22 cm x 17 cm x 5 cmScope of Delivery1x Easyrig Cheese Plate for Sony Venice on MinimaxUser manual

Configure your Misfit Kick to Swing Away with 15mm LWS support.Configure your Misfit Kick for swing away, speeding up lens changes and adding support for use with rubber donuts. This kit comes with everything you need for swing away including the Dovetail for the Misfit Kick, Swing Away Core & 15mm LWS Swing Away arm.Using the swing away core, you can slide the matte box forward and easily swing away the matte box using the push button for clear access to the lens without having to remove the matte box completely. When you don't require swing away support, simply use the quick release to remove the matte box.The arm can be adapted to studio supports using the  B1235.1003 - 19mm Studio Bracket or B1235.1004 - 15mm Studio Bracket.FEATURES Adds swing away functionality to provide clear access for faster lens changes     Offers vertical height adjustment     Secure 15mm rod clamp     Compatible with 15 & 19mm studio brackets     Includes:B1235.1019 - Swing Away Dovetail (Misfit Kick)B1235.1020 - 15mm LWS Swing Away arm (Misfit Kick)B1210.1019 - Swing Away Core

Extension piece to adapt the 80, 85, 87 & 95mm Frame Safe Clamp Adapters to the 15mm LWS Support BracketEach Frame Safe Clamp Adapter is configurable for fixed rod support. Depending on the clamp adapter size, you may require a support extension that attaches the clamp adapter to the 15mm LWS support bracket.This support extension is designed for the 80, 85, 87 & 95mm Frame Safe Clamp Adapters and attaches using two screws.The support extensions are height adjustable and set on a guided track. Raising and lowering the extension sets the height position of the matte box and is secured using the set screw.The 15mm LWS Support Bracket attaches to the bottom of the extensions using the two captive screws on the support bracket. It is built from precision cut and anodised from aluminium.FEATURES Compatible with 80, 85, 87 & 95mm Frame Safe Clamp Adapters     Built from hard anodised aluminium     Works with B1235.1002 - 15mm LWS Support Bracket     Compatible with ARRI 15mm Lightweight Support Console Includes:15mm LWS Support Extension (80 - 95mm clamps)

The Misfit Kick has interchangeable clamp adapters to match the front outer diameter of lenses from 80mm to 143mm in diameter. This clamp adapter lets you clip on the Misfit Kick directly onto lenses with an 100mm outer diameter like the Hawk V-Lite, Lomo round front & Schneider Cine-Xenar lenses.It features our new Frame Safe design that not only has the standard circular cut out but an additional rectangular aperture to maximise the field of view to prevent vignetting, even when using wide lenses with large format sensors without having to use a 6x6"" matte box.Each clamp adapter provides proper clamping force to securely mount to the lens. The Frame Safe Clamp Adapters are also compatible with the ARRI LMB 4x5, LMB-25, LMB15 & LMB-5.To add rod support for the Misfit Kick using the 100mm Clamp Adapter, you will require the B1235.1021 15mm LWS Support Extension (100 - 114mm clamps) together with the B1235.1002 15mm LWS support bracket."FEATURES Interchangeable Frame Safe Clamp Adapters    Compatible with ARRI LMB 4x5, LMB-25, LMB-15 & LMB-5    Suits lenses with 100mm outer diameter    Compatible with 15mm LWS support bracket    Includes:Frame Safe Clamp Adapter (100mm)

Set up your Canon C300 Mark III in a seamless cage for video and cinema production with the Expert Kit. Quickly move from setup to setup without distractions, with optimal balance when shooting handheld or on a tripod using the Open•UP quick release system and form-fitting side plates for maximum rigidity and protection.   The Bright Tangerine Expert Kit for the Canon EOS C300 Mark III provides a lightweight handheld and tripod-based support system for the camera. The baseplate uses the patented Open•UP Quick Release system that will securely mount to any ARRI Standard dovetail, even those out of tolerance, letting you quickly transition between camera setups e.g. tripod to handheld with the Left Field ARRI Dovetail Plate or any standard ARRI dovetail. The camera can be easily positioned on the dovetail for optimal balance. The baseplate has front and rear rod locks to support 15mm LWS industry-standard rods. By having front and rear locks, two short sets of rods can be used to form longer support, making it easier to transport and pack down. Also included is the carrying top handle and monitor bracket to reposition the Canon LA-V1 monitor bracket onto the handle or camera cage when using the touch screen monitor. Designed to match the contours of the camera, all of the ports and buttons remain easily accessible. The camera can also slide in and out of the cage without having to disassemble the cage each time. The Sliding Top Plate also features an ARRI dovetail standard clamp that provides a quick release for the Left Field ARRI Dovetail Plate. The plate can be used to mount the top carrying handle or other accessories which can be quickly mounted to the top plate and adjusted for optimal balance. A 15mm LWS rod bracket is also mounted to the top plate for use with lens motors or other accessories like an EVF bracket. Particularly useful for drone and gimbal use. Connecting the baseplate to the top plate are the left & right side plates which transfer any physical stress from the camera body to the cage and provide stability to the camera setup. The side plates feature multiple accessory points as well as an ARRI rosette for relocation of the handgrip and maintains full access to the camera ports and buttons. Throughout the cage, 1/4″-20, 3/8″-16 & ARRI accessory mounts are provided for adding any additional accessories like the Titan Arm.   Includes: Canon C500 II/C200/C300 III Baseplate Canon C500 II/C200/C300 III Top Plate Top Handle LA-V1 Bracket Adapter Left Field ARRI Dovetail Canon C500 II//C300 III Side Plates 15mm Rod Adaptor 15mm Drumstix Pair 12″/30cm Note: you can use this Expert Kit also for the Canon C500 MK II, as the dimensions of both cameras are the same !

The Misfit Kick has interchangeable clamp adapters to match the front outer diameter of lenses from 80mm to 143mm in diameter. This clamp adapter lets you clip on the Misfit Kick directly onto lenses with an 134mm outer diameter like the ARRI 280mm Signature Prime, Fujinon Alura 18-80mm, Alura 45-250mm, Zeiss Master Prime 150mm, Master Prime 8mm, Atlas Orion 25mm, Zeiss CP.2 50mm macro and more.It features our new Frame Safe design that not only has the standard circular cut out but an additional rectangular aperture to maximise the field of view to prevent vignetting, even when using wide lenses with large format sensors without having to use a 6x6"" matte box. Each clamp adapter provides proper clamping force to securely mount to the lens.The Frame Safe Clamp Adapters are also compatible with the ARRI LMB 4x5, LMB-25, LMB15 & LMB-5.To add rod support for the 134mm Clamp Adapter, you will require the B1235.1002 15mm LWS support bracket.FEATURES Interchangeable Frame Safe Clamp Adapters     Compatible with ARRI LMB 4x5, LMB-25, LMB-15 & LMB-5     Suits lenses with 134mm outer diameter     Compatible with 15mm LWS support bracket     Includes:Frame Safe Clamp Adapter (134mm)

Clip on the Misfit Kick directly onto lenses with an 87mm outer diameter.The Misfit Kick has interchangeable clamp adapters to match the front outer diameter of lenses from 80mm to 143mm in diameter. This clamp adapter lets you clip on the Misfit Kick directly onto lenses with an 87mm outer diameter like ARRI Macro, Zeiss Super Speeds, Kowa Evolution 2x anamorphic primes, Duclos Cine-Mod & Cooke Speed Panchro (S2) lenses.It features our new Frame Safe design that not only has the standard circular cut out but an additional rectangular aperture to maximise the field of view to prevent vignetting, even when using wide lenses with large format sensors without having to use a 6x6"" matte box.Each clamp adapter provides proper clamping force to securely mount to the lens. The Frame Safe Clamp Adapters are also compatible with the ARRI LMB 4x5, LMB-25, LMB-15 & LMB-5.To add rod support for the Misfit Kick using the 87mm Clamp Adapter, you will require the B1235.1022 15mm LWS Support Extension (80 - 95mm clamps) together with the B1235.1002 15mm LWS support bracket.FEATURES Interchangeable Frame Safe Clamp Adapters    Compatible with ARRI LMB 4x5, LMB-25, LMB-15 & LMB-5    Suits lenses with 87mm outer diameter    Compatible with 15mm LWS support bracket    Includes:Frame Safe Clamp Adapter (87mm)

Add 15mm LWS swing away support to the Misfit Kick for quick and easy lens changes. This arm attaches directly to the swing away core.The 15mm LWS Swing Away Arm connects to the Swing Away Core via the dovetail and is locked securely in place.The bracket has a single lever to lock the rod clamp on both sides, removing the need for a second lever. It is built from hard anodised aluminium for durability and strength.FEATURES Single lever rod clamp for faster setup     Built from hard anodised aluminium     Attaches to Swing Away Core Includes:15mm LWS Swing Away Arm (Misfit Kick)

Set up the Misfit Kick for 15mm Studio rod supportSupport the Misfit Kick on 15mm rods when using a large camera and lens configuration.A tool-less 15mm Studio support bracket attaches to either the 15mm LWS support bracket or 15mm LWS swing arm using a 3/8"" lock screw which engages with two locating pins for anti-twist. The bracket has a single lever to lock the rod clamp on both sides, removing the need for a second lever. The 19mm Studio Support Bracket is also compatible with the K2.0013427 - ARRI LMB 15mm Lightweight Support ConsoleFEATURESCompatible with B1235.1002 - 15mm LWS Support Bracket, B1235.1020 - 15mm LWS Swing Away Arm & K2.0013427 ARRI 15mm Lightweight Support ConsoleIncludes:15mm Studio Bracket (Misfit Kick)

Misfit Kick is the next generation matte box for all cinematographers. This kit comes ready with two 4x5.65" filter trays. The Misfit Kick is a versatile matte box for all types of filmmaking. Configurable to clip on, rod mount or swing away. This kit includes the essentials, with the core and two 4x5.65"" filter trays. To complete the system, simply add a Frame Safe clamp adapter to suit your lens and you have a complete matte box ranging from 80mm to 143mm. The clamp adapters use the new Frame Safe design for an extra wide field of view, even when using large format sensors with wide lenses. The Misfit Kick features an all-new patented reveal stage design, making it more robust and easier to operate in the field, converting from a 2-stage to 3-stage matte box without any extra hardware or tools, just a third filter tray.Rather than use ball bearings like traditional matte boxes, the Misfit Kick uses a new spring system in combination with a protruding ridge to secure the filter trays, creating a positive locking position with tactile feedback for increased confidence when loading filters. For even more security, a filter guard can be mounted onto the bottom of the sunshade. When working in fast paced environments like on a tracking vehicle, drone or jib, a safety loop provides a secure tethering point for a safety wire or lanyard.  For additional light protection, add the optional top flag, side flag or hard mattes for precise control over flares and image contrast. Knurled, captive locking screws are used to secure filters in place, preventing screws from going missing while in the field. The sunshade is built from high-grade carbon fibre and the reveal system from CNC cut hard anodised aluminium for extra strength while staying lightweight .FEATURES Patented Reveal Stage for tool-less conversion to 3-stage Works with Frame Safe Clamp Adapters for Misfit Kick and compatible with ARRI clamp adapters    Configurable to clip on, rod mount or swing away on 15mm LWS or 15/19mm Studio supports    Compatible with ARRI filter trays    Includes:"B1235.1001 - Misfit Core2x B1251.1042 - 4x5.65"" Filter Tray (Misfit Kick)"

Misfit Kick is the next generation matte box for all cinematographers. This kit comes ready with two 4x5.65" filter trays and carbon fibre top flag. The Misfit Kick is a versatile matte box for all types of filmmaking. Configurable to clip on, rod mount or swing away.This kit includes the Misfit Kick core, two 4x5.65"" filter trays and the carbon fibre top flag. To complete the system, simply add a Frame Safe clamp adapter to suit your lens and you have a complete matte box ranging from 80mm to 143mm.The clamp adapters use the new Frame Safe design for an extra wide field of view, even when using large format sensors with wide lenses.The Misfit Kick features an all-new patented reveal stage design, making it more robust and easier to operate in the field, converting from a 2-stage to 3-stage matte box without any extra hardware or tools, just a third filter tray.Rather than use ball bearings like traditional matte boxes, the Misfit Kick uses a new spring system in combination with a protruding ridge to secure the filter trays, creating a positive locking position with tactile feedback for increased confidence when loading filters. For even more security, a filter guard can be mounted onto the bottom of the sunshade. When working in fast paced environments like on a tracking vehicle, drone or jib, a safety loop provides a secure tethering point for a safety wire or lanyard. For additional light protection, add the optional top flag, side flag or hard mattes for precise control over flares and image contrast.Knurled, captive locking screws are used to secure filters in place, preventing screws from going missing while in the field. The sunshade is built from high-grade carbon fibre and the reveal system from CNC cut hard anodised aluminium for extra strength while staying lightweight.FEATURES Patented Reveal Stage for tool-less conversion to 3-stage     Works with Frame Safe Clamp Adapters for Misfit Kick and compatible with ARRI clamp adapters     Configurable to clip on, rod mount or swing away on 15mm LWS or 15/19mm Studio supports     Compatible with ARRI filter trays     Includes:B1235.1001 - Misfit Core2x B1251.1042 - 4x5.65"" Filter Tray (Misfit Kick)B1210.1025 - Carbon Fibre Top Flag (Misfit Kick)

Set up your Canon C500 Mark II in a seamless cage for video and cinema production with the Expert Kit. Quickly move from setup to setup without distractions, with optimal balance when shooting handheld or on a tripod using the Open•UP quick release system and form-fitting side plates for maximum rigidity and protection.  The Bright Tangerine Expert Kit for the Canon EOS C500 Mark II provides a lightweight handheld and tripod-based support system for the camera. The baseplate uses the patented Open•UP Quick Release system that will securely mount to any ARRI Standard dovetail, even those out of tolerance, letting you quickly transition between camera setups e.g. tripod to handheld with the Left Field ARRI Dovetail Plate or any standard ARRI dovetail. The camera can be easily positioned on the dovetail for optimal balance. The baseplate has front and rear rod locks to support 15mm LWS industry-standard rods. By having front and rear locks, two short sets of rods can be used to form longer support, making it easier to transport and pack down. Also included is the carrying top handle and monitor bracket to reposition the Canon LA-V1 monitor bracket onto the handle or camera cage when using the touch screen monitor. Designed to match the contours of the camera, all of the ports and buttons remain easily accessible. The camera can also slide in and out of the cage without having to disassemble the cage each time. The Sliding Top Plate also features an ARRI dovetail standard clamp that provides a quick release for the Left Field ARRI Dovetail Plate. The plate can be used to mount the top carrying handle or other accessories which can be quickly mounted to the top plate and adjusted for optimal balance. A 15mm LWS rod bracket is also mounted to the top plate for use with lens motors or other accessories like an EVF bracket. Particularly useful for drone and gimbal use. Connecting the baseplate to the top plate are the left & right side plates which transfer any physical stress from the camera body to the cage and provide stability to the camera setup. The side plates feature multiple accessory points as well as an ARRI rosette for relocation of the handgrip and maintains full access to the camera ports and buttons. Throughout the cage, 1/4″-20, 3/8″-16 & ARRI accessory mounts are provided for adding any additional accessories like the Titan Arm.   Includes: Canon C500 II/C200/C300 III Baseplate Canon C500 II/C200/C300 III Top Plate Top Handle LA-V1 Bracket Adapter Left Field ARRI Dovetail Canon C500 II//C300 III Side Plates 15mm Rod Adaptor 15mm Drumstix Pair 12″/30cm Note: you can use this Expert Kit also for the Canon C300 MK III, as the dimensions of both cameras are the same !

Clip on the Misfit Kick directly onto lenses with an 80mm outer diameterThe Misfit Kick has interchangeable clamp adapters to match the front outer diameter of lenses from 80mm to 143mm in diameter. This clamp adapter lets you clip on the Misfit Kick directly onto lenses with an 80mm outer diameter like ARRI Macro, Zeiss Super Speeds, Kowa Evolution 2x anamorphic primes, Duclos Cine-Mod & Cooke Speed Panchro (S2) lenses.It features our new Frame Safe design that not only has the standard circular cut out but an additional rectangular aperture to maximise the field of view to prevent vignetting, even when using wide lenses with large format sensors without having to use a 6x6"" matte box.Each clamp adapter provides proper clamping force to securely mount to the lens. The Frame Safe Clamp Adapters are also compatible with the ARRI LMB 4x5, LMB-25, LMB15 & LMB-5.To add rod support for the Misfit Kick using the 80mm Clamp Adapter, you will require the B1235.1022 15mm LWS Support Extension (80 - 95mm clamps) together with the B1235.1002 15mm LWS support bracket.FEATURES Interchangeable Frame Safe Clamp Adapters    Compatible with ARRI LMB 4x5, LMB-25, LMB-15 & LMB-5    Suits lenses with 80mm outer diameter    Compatible with 15mm LWS support bracket    Includes:Frame Safe Clamp Adapter (80mm)

The core of the Misfit Kick, featuring the patented reveal stage to transform from 2-stage to 3-stage without tools or extra hardware.The Misfit Kick is a versatile matte box for all types of filmmaking. Configurable to clip on, rod mount or swing away. The Misfit Kick Core is the base module of the system.The clamp adapters use the new Frame Safe design for an extra wide field of view, even when using large format sensors with wide lenses.The Misfit Kick features an all-new patented reveal stage design, making it more robust and easier to operate in the field, converting from a 2-stage to 3-stage matte box without any extra hardware or tools, just a third filter tray.Rather than use ball bearings like traditional matte boxes, the Misfit Kick uses a new spring system in combination with a protruding ridge to secure the filter trays, creating a positive locking position with tactile feedback for increased confidence when loading filters. For even more security, a filter guard can be mounted onto the bottom of the sunshade. When working in fast paced environments like on a tracking vehicle, drone or jib, a safety loop provides a secure tethering point for a safety wire or lanyard. For additional light protection, add the optional top flag, side flag or hard mattes for precise control over flares and image contrast.Knurled, captive locking screws are used to secure filters in place, preventing screws from going missing while in the field. The sunshade is built from high-grade carbon fibre and the reveal system from CNC cut hard anodised aluminium for extra strength while staying lightweight ."FEATURES Tool-less conversion from 2-stage to 3-stage using patented Reveal stage     Wide field of view with Frame Safe clamp adapters     Lightweight & compact design     Compatible with ARRI filter trays     Includes:Misfit Kick Core

The Misfit Kick has interchangeable clamp adapters to match the front outer diameter of lenses from 80mm to 143mm in diameter. This clamp adapter lets you clip on the Misfit Kick directly onto lenses with an 136mm outer diameter like the Angenieux Optimo 17-80, Canon CN-E 30-300mm, Cooke Anamorphic/i Zoom, Fujinon Premier PL  zooms and more.It features our new Frame Safe design that not only has the standard circular cut out but an additional rectangular aperture to maximise the field of view to prevent vignetting, even when using wide lenses with large format sensors without having to use a 6x6"" matte box.Each clamp adapter provides proper clamping force to securely mount to the lens.The Frame Safe Clamp Adapters are also compatible with the ARRI LMB 4x5, LMB-25, LMB15 & LMB-5.To add rod support for the 136mm Clamp Adapter, you will require the B1235.1002 15mm LWS support bracket.FEATURES Interchangeable Frame Safe Clamp Adapters     Compatible with ARRI LMB 4x5, LMB-25, LMB-15 & LMB-5     Suits lenses with 136mm outer diameter     Compatible with 15mm LWS support bracket     Includes:Frame Safe Clamp Adapter (136mm)

Add protection from light entering from the side of the matte box, preventing flares and maintaining image contrast.The Carbon Fibre Side Flags give you fine control over the light entering your frame. With extendable wings, you can protect your image to maintain proper contrast or let light in to add creative flares.It comes with the flag mounts which attach to the side of the matte box and provide quick release mounting for the flags.Each flag is made from carbon fibre to reduce weight, and is coated for maximum durability.FEATURES Strong & lightweight carbon fibre construction     Expandable wings for extra protection     Includes mounting brackets     Compatible with the Misfit Kick, VIV, VIV 5" & Misfit Includes:Left Side Carbon Fibre FlagRight Side Carbon Fibre Flag4x side flag mounting brackets