High-load, ultra compact power solution for film sets

• Five hot-swappable modular inputs
• Six regulated outputs up to 1000W
• And a three bay battery charger
  
  

Introducing the ultimate power solution for all your power needs. This powerful system comes equipped with five hot-swappable inputs and six regulated, always-on outputs, providing up to 1000W of power. With two external inputs that are prioritized over the on-board batteries, you can now travel worry-free with untested foreign equipment that may have conflicting wiring.

With built-in over and under-voltage protection, as well as overcurrent monitoring, this power solution ensures safe and reliable operation. Reverse current from a higher voltage input source is blocked, making it ideal for use with remote heads, underwater rigs, or any other scenarios where hot-swapping is critical.

The external inputs are independently rectified, providing the correct polarity to the downstream equipment. This power solution has no crosstalk, built-in protection, polarity rectification, complete voltage range, and is hot-swappable, making it an ideal solution for any setup.

All channels are independent, ensuring that the batteries are not connected together. You can use any battery mount usually used on set via the universal battery plates, making it even more convenient. And if needed, 14V and 28V batteries can be used at the same time.

The input currents are digitally controlled for optimal discharge rates and timings, making this power solution the ultimate choice for any professional setup. With this power solution, you can rest assured that you have the power you need, when you need it, and with complete reliability.

Cmotion Mainstation MST1 Kit includes

1 x Mainstation MST1

1 x MST1 Base Stand

2 x XLR Boost Enable Cables

(28V boost enable cable - XLR 4pin - XLR 3pin) (48V boost enable cable - XLR 3pin - XLR8+2 pin)

3 x Universal Battery Plates One set of the same type.

Available options: B-Mount 28V (recommended for maximum power) V-Mount IDX 14V V-Mount CORE 14 / 28V Dual Voltage G-Mount CORE 14 / 28V Dual Voltage G-Mount Anton Bauer Plus 14 / 26V

Tools / Accessories

Tool for Universal Battery Plates Tool for base stand USB-C Drive for updates

1 x cmotion travel case with custom inserts

Will fit a Mainstation, additional battery mounts, cables and four batteries.

Input Manager

External Inputs

• Inputs: 2
• Socket: XLR3
• Polarity: Any (Pin 1 and 2 powered, Pin 3 no connect)
• Input Range: 10-34VDC
• Input Current: 20A max
• Protections: Overvoltage, overcurrent, thermal monitoring
• Safety: Reverse current protection
• Hot-swappable: Yes – highest voltage leads
• Priority: Prioritized over on-board batteries
• Switchover Voltage: 11VDC
• On-board Batteries
• Inputs: 3
• Mount: MST1 Universal Battery Plate
• Input Range: 10-34VDC
• Input Current: 20A max
• Protections: Overvoltage, overcurrent, thermal monitoring
• Safety: Reverse current protection (no cross charging)
• Hot-swappable: Yes – all inputs
• Priority: On stand-by if external input is valid
• Shutoff Voltage: 10VDC

Power Converters

• Main Output 1
• Socket: XLR4
• Polarity: 1 GND / 2 ID / 3 NC / 4 PWR
• Output Range: 14.8VDC
• Boosted Range: 28.8VDC
• Output Power: 300W max (if input source permits)
• Protection: Overcurrent, thermal monitoring
• Safety: Reverse currents blocked
• Main Output 2
• Socket: XLR3
• Polarity: 1 GND / 2 PWR / 3 ID
• Output Range: 26 34VDC
• Boosted Range: 36 48.8VDC
• Output Power: 700W max (if input sources permit)
• Protection: Overcurrent, thermal monitoring
• Safety: Reverse currents blocked

Accessories Outputs

• Lemo 2pin: 12V / 3A / industry polarity
• RS 3 pin: 24V / 3A / industry polarity
• LBUS Power: 24V / 5A / industry polarity
• LBUS Data: Features TBA
• USB-C: 100W PD3.0

Charger Modules

• Channels: 3-channel (each on-board battery)
• Charging Voltage: 16.8V or 33.4V (auto detection)
• Digital Communication: SMBus / other protocols TBA
• User Action: Auto charge or manual enable
• Safety: Digital current limiting, voltage, and thermal monitoring
• Charging Setting: Independent voltage and charging profile for each battery
• Charging Source: External XLR input (11 – 34V)

Mechanical

• Dimensions: 197 x 132 x 47mm
• Weight: 2000g / 2.2lbs
• Mounting: 2x 3/8 16 UNC

Other

• Integrated Battery: No
• Flight Safe: Yes