Teradek

  Teradek Bolt 6 XT MAX Set with 10K RX V-MountBolt 6 XT is a wireless video transmission system that supports up to 4K60 10-bit 422 HDR video over 12G-SDI. Bolt 6 uses Teradek’s patented Zero-Delay silicon chip to send wireless video over 5GHz and 6GHz radio frequencies. This kit includes a Bolt 6 XT TX and a Bolt 6 XT 10K RX. Bolt 6 XT 10K RX is a zero-delay video receiver, offering a remarkable wireless range of up to 10,000 feet (3 kilometers). Its enhanced directional antenna is specifically designed for superior RF performance, minimizing interference by focusing signal reception and benefiting from robust internal shielding. Its all-in-one enclosure design not only boosts range and reliability in challenging RF environments, but it also eliminates the hassle of external antenna cables. This results in a much cleaner setup, expediting deployment from its case onto a c-stand. Control your setup with ease using the Bolt App, which simplifies device pairing, allows fine-tuned frequency adjustments, and includes a built-in spectrum analyzer for advanced RF diagnostics. This kit is compatible with additional Bolt 6 and Bolt 4K receivers.Features Complete Bolt Set with Bolt 6 XT TX and 10K RX Up to 10,000ft (3km) range with Zero-DelayUp to 4K30 10-bit 422 HDR Video5GHz and 6GHz Auto or Manual Frequency Selection6GHz is available in the US, EU, Canada, Japan and Australia/New ZealandInputs: 12G-SDI, HDMI 2.0 Outputs: 2x12G-SDI, HDMI 2.0 on Panel Antenna with built-in RX Purchase with Gold or V-Mount Battery Plates Bolt 6GHz HIGHLIGHTS Powered by our BB3 chipset Pairs with up to 6 receivers, or unlimited receivers when used in Broadcast mode with the MAX models 12 new 40MHz wide channels from 5.925 to 6.425GHz Enhanced long-range image quality feature New SDI pattern tool to monitor SDI signal quality Universal compatibility with all Bolt 6 and Bolt 4K Series Ultra fast pairing and intuitive setup with Bolt Manager App AES-256 encryption and RSA 1024 key pairing prevents unauthorized access   Technical Specs Range: 10,000ft/ 3km LOS Video Inputs: 1x 12G-SDI SMPTE 2082-1 standard/75 Ω, 1x HDMI 2.0 Type-A receptacle* 1x Loop-out 12G-SDI on TransmitterVideo Outputs @ RX: 2x 12G-SDI SMPTE 2082-1 standard/75 Ω, 1x HDMI 2.0 Type-A receptacleDelay: <0.001sec Video Compression: visually losslessPower Input: 2-pin Connector 10-28 VDC Power Consuption: TX: 18 Watts; RX: 18 WattsRF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels)Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30/50/59.94/60 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz 5.755 ~ 5.795 GHz 5.945 ~ 6.425 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz  What's In The Box? 1 x Bolt 6 XT 10,000ft TX with V-Mount Plates1 x Antenna Array with built-in Bolt 6 XT 10K RX with V-Mount1x Hot Shoe Adapter1 x 2pin Conn. to PowerTap - 18in/46cm Cable1x 2pin Conn. to 2pin Conn 18in/46cm Cable 2 x SDI 12G BNC to BNC 18in/46cm Cable 1 x Teradek Case XL - Bolt XT TX/4RX 1 x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable 4 x Antenna 2dBi Rigid V 4.9-7.3Ghz RP-SMA (TX)2x 6G Flexible H Antenna "Mushroom" (2dBi 4.9-7.3Ghz RP-SMA) 1 x USB 2.0 Type A Male to USB Type C Male - 1m Cable 1 x Wooden Camera - Universal Ultra Arm Monitor Mount (Combo 1/4-20 & 3/8-16, 5") 4x Bolt 6 XT TX Color Bands (Red, Blue, Yellow, Green)    

  Bolt 6 XT 10K RX is a zero-delay video receiver, offering a remarkable wireless range of up to 10,000 feet (3 kilometers) over 5 or 6GHz frequencies. Fully compatible with both Bolt 6 and Bolt 4K transmitters, it integrates seamlessly into any existing Bolt 4K or Bolt 6 system. Delivering visually lossless 4K60 4:2:2 video via two 12G-SDI outputs, the Bolt 6 XT 10K RX ensures professional-grade image quality. Its enhanced directional antenna is specifically designed for superior RF performance, minimizing interference by focusing signal reception and benefiting from robust internal shielding. Its all-in-one enclosure design not only boosts range and reliability in challenging RF environments but it also eliminates the hassle of external antenna cables. This results in a much cleaner setup, expediting deployment from its case onto a c-stand. Control your setup with ease using the Bolt App, which simplifies device pairing, allows fine-tuned frequency adjustments, and includes a built-in spectrum analyzer for advanced RF diagnostics. Features Super long range (10,000ft/3km) receiver for Bolt 4K and Bolt 6Supports up to 4K60 10-bit 4:2:2 HDRFully integrated, directional panel antennaBuilt-in Gold or V-Mount battery plate2x 12G-SDI and 1x HDMI outputsLCD Display and Joystick Technical SpecsRange: 10,000ft/ 3km LOSDelay: <0.001secVideo Compression: visually lossless Support Resolutions:  4Kp23.98/24/25/29.97/30/50/59.94/60 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz 5.755 ~ 5.795 GHz 5.945 ~ 6.425 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz  Fully compatible with both Bolt 6 and Bolt 4K transmitters, it integrates seamlessly into any existing Bolt 4K or Bolt 6 system. What's In The Box?  1 x Antenna Array with built-in  Bolt 6 XT 10K RX with V-Mount Plate 1 x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable1 x USB 2.0 Type A Male to USB Type C Male - 1m Cable  

Get a grip on your CTRL.5 with these comfortable, adjustable and easily removable Hand Grips. Made from Bocote wood, these grips are lightweight and provide the user options in creating the grip that works best for them. The knob guard allows the user to protect the back of the knob when laying the hand unit on a table or surface. This system includes a palm grip, thumb grip, knob guard, and all the hardware you need to mount them to the CTRL.5. Technical Specifications Grips are mode of Bocote wood to increase comfort Provides a comfortable way to hold on to the controller Protects the back of the knob Includes all the hardware required to mount to the controller  In the Box 1 x Palm Grip1 x Thumb Grip1 x Knob Guard2 x M3 Screws3 x 1/4-20 Screws

The Kickstand for CTRL.5 was designed to allow your CTRL.5 to sit upright on any surface when not in use. This symmetrical in design plate allows the user to attach to the top or bottom mounting points on the CTRL.5 without running into any antenna. Because of its unique design users can mount the stand to the controller using a 3/16” hex wrench at a 90º or 45º position. Removable anti-twist pins are included to prevent movement of the stand while attached to the CTRL.5. This Kickstand also includes numerous mounting points for additional accessories like baby pins, monitor mounts and more. This unique design feature makes this Kickstand lightweight and versatile– it’s the controller accessory you never knew you needed. Technical Specificatios Allows the CTRL.5 to sit freely on surfaces   Variable seating positions between 45º and 90º Additional mounting points provided to a CTRL.5 Lightweight, but durable design aesthetic Symmetrical in design to attach to the top or bottom of the CTRL.5 without hitting antenna

The Bolt-On Monitor Hinge Cube was designed to securely mount monitors to the CTRL.5 controller via ¼”-20 mounting points. This cube was specifically designed so that anything mounted to the controller clears the antennas on the controller itself. Using the dual Rosettes design, the user can easily adjust the positioning of the monitor without questioning the security of the connection to the CTRL.5. The cube features ⅜”-16 mounting points for additional accessories. Removable anti-twist pins are compatible with SmallHD monitor mounting points or other 3rd party monitors. The cube is securely attached to the CTRL.5 via a ¼”-20 screw with anti-twist pins. Technical Specificatios Adjustable hinge positions via a rosette attachment Removable mounting pins for 3rd party monitors Able to mount to a CTRL.5 or other camera accessories like handles Mounting points around the cube for additional accessory mounting ¼”-20 mounting point for the cube to fit onto the CTRL.5

Teradek RT systems combine premium lens-control technology with smart design, allowing you to view and adjust critical lens data and functions directly on your CTRL.5 screen for unparalleled accuracy and dependability on set.The FIZ Kit includes: 1 x CTRL.5 Handset 1 x MDR.X Lens Control Receiver 1 x MOTR.S MAX Lens MotorCTRL.5CTRL.5 raises the bar for wireless FIZ lens-control handsets with a 5-inch SmallHD Ultra-bright touchscreen powered by CTRL.OS, a task-specific evolution of SmallHD’s PageOS. View critical lens data overlays while pulling focus without taking your eyes off the video feed. Calibrate lenses to pre-marked focus rings and access configurations at any time via the touchscreen or one of eleven programmable function buttons. The hand unit includes a multitude of mounting points for accessories. CTRL.5 is fully cross-compatible across the Teradek RT Lens Control Ecosystem. MDR.X Teradek RT receivers are easy to mount and can connect to iOS devices via Bluetooth for configuration, control, and support for up to three motors. This FIZ kit comes with the ultra-lightweight MDR.S receiver which suits extremely compact setups for smaller cameras, drones, and handheld configurations to optimize speed, size, and weight. The Teradek TOF.1 rangefinder works with both MDR.S and MDR.XMOTR.S MAXTeradek RT motors offer generous power and speed for driving even the heaviest lenses, giving you responsiveness & precision with every pull. MOTR.S MAX offers 1.2Nm of peak torque and operates nearly silently even at the highest speeds thanks to its brushless design. The optional MOTR.S is a more compact version of the MAX; it offers high speed while being almost 20% lighter. MOTR.S is sold separatelyNote: While three RT Motor Cables are included in the RT FIZ Wireless Lens Control Kit (ST-ST 0.2m, ST-ST 0.4m, and ST-ST 0.6m), additional RT Motor Cables are available in specific lengths for additional motors (20cm, 30cm, or 60cm). FIZ kit includes the essentials to pull focus with confidenceIn the Box 1x CTRL.51 x MDR.X 1 x MOTR.S MAX with Standard Bracket 1 x Compact Bracket for MOTR.S/MAX 1 x Blank Rings 1 x Pre-Marked Iris Ring 1 x Set of Pre-Marked Focus Rings - Imperial 1 x Set of Pre-Marked Focus Rings - Metric 1 x Thumb Screw for mounting MDR.X 1 x 5pin to 5pin USB Cable, Straight to Right Angle (12in / 0.3m) 1 x 2pin to P-Tap cable, 18in / 0.46m 1 x 2pin to 2pin cable, 18in / 0.46m 1 x USB-A to USB-Mini for MDR.X FW Updates 1 x Motor Cable 7.8 in / 0.2m 1 x Motor Cable 15.75 in / 0.4m 1 x Motor Cable 23.6 in / 0.6m 1 x 6pin CAM to 3pin R/S Cable for MDR.S/X 1 x Hinged Monitor Mount for CTRL.5 1 x Hand Strap for CTRL.5 1 x Neck Strap for CTRL.5 1 x Screen Protector for CTRL.5 (Matte) 1 x Palm Grip for CTRL.5 (Wood) 1 x Thumb Grip for CTRL.5 (Wood) 1 x Knob Guard for CTRL.5 (Wood) 1 x SKB Case with Custom Foam for CTRL.5 3 x 2.4 GHz Antenna (28.4mm length 0.56db rp-sma) 1 x Silicone Knob Grip - Black Useful Accessories:11-1591 Screen Protector for CTRL.5 11-1138 SKB Case for CTRL.5 11-1139 2.4GHz 28.4mm Antenna for CTRL.5 / MDR.S 11-1134 NP-F976 L-Series 7.2V, 6600 MAh Li-Ion Battery for CTRL.5 11-1588 Bolt-On Monitor Hinge Cube11-1593 Kickstand for CTRL.511-1592 Hand Grip for CTRL.5

Teradek RT systems combine premium lens-control technology with smart design, allowing you to view and adjust critical lens data and functions directly on your CTRL.5 screen for unparalleled accuracy and dependability on set.The FIZ Kit includes: 1 x CTRL.5 Handset 1 x MDR.S Lens Control Receiver 1 x MOTR.S MAX Lens MotorCTRL.5CTRL.5 raises the bar for wireless FIZ lens-control handsets with a 5-inch SmallHD Ultra-bright touchscreen powered by CTRL.OS, a task-specific evolution of SmallHD’s PageOS. View critical lens data overlays while pulling focus without taking your eyes off the video feed. Calibrate lenses to pre-marked focus rings and access configurations at any time via the touchscreen or one of eleven programmable function buttons. The hand unit includes a multitude of mounting points for accessories. CTRL.5 is fully cross-compatible across the Teradek RT Lens Control Ecosystem. MDR.S Teradek RT receivers are easy to mount and can connect to iOS devices via Bluetooth for configuration, control, and support for up to three motors. This FIZ kit comes with the ultra-lightweight MDR.S receiver which suits extremely compact setups for smaller cameras, drones, and handheld configurations to optimize speed, size, and weight. The Teradek TOF.1 rangefinder works with both MDR.S and MDR.XMOTR.S MAXTeradek RT motors offer generous power and speed for driving even the heaviest lenses, giving you responsiveness & precision with every pull. MOTR.S MAX offers 1.2Nm of peak torque and operates nearly silently even at the highest speeds thanks to its brushless design. The optional MOTR.S is a more compact version of the MAX; it offers high speed while being almost 20% lighter. MOTR.S is sold separatelyNote: While three RT Motor Cables are included in the RT FIZ Wireless Lens Control Kit (ST-ST 0.2m, ST-ST 0.4m, and ST-ST 0.6m), additional RT Motor Cables are available in specific lengths for additional motors (20cm, 30cm, or 60cm). FIZ kit includes the essentials to pull focus with confidenceIn the Box 1 x CTRL.51 x MDR.S 1 x MOTR.S MAX with Standard Bracket 1 x Compact Bracket for MOTR.S/MAX 1 x Blank Rings 1 x Pre-Marked Iris Ring 1 x Set of Pre-Marked Focus Rings - Imperial 1 x Set of Pre-Marked Focus Rings - Metric 1 x MRD.S Mounting Bracket 1 x 5pin to 5pin USB Cable, Straight to Right Angle (12in / 0.3m) 1 x 3pin to 2pin cable, 16in / 0.4m 1 x 3pin to P-Tap cable, 16in / 0.4m 1 x USB-A to USB-C for MDR.S FW Updates 1 x Motor Cable 7.8 in / 0.2m 1 x Motor Cable 15.75 in / 0.4m 1 x Motor Cable 23.6 in / 0.6m 1 x 3pin to 3pin R/S Cable for MDR.S 1 x Hinged Monitor Mount for CTRL.5 1 x Hand Strap for CTRL.5 1 x Neck Strap for CTRL.5 1 x Screen Protector for CTRL.5 (Matte) 1 x Palm Grip for CTRL.5 (Wood) 1 x Thumb Grip for CTRL.5 (Wood) 1 x Knob Guard for CTRL.5 (Wood) 1 x SKB Case with Custom Foam for CTRL.5 3 x 2.4 GHz Antenna (28.4mm length 0.56db rp-sma) 1 x Silicone Knob Grip - Black Useful Accessories:11-1591 Screen Protector for CTRL.5 11-1138 SKB Case for CTRL.5 11-1139 2.4GHz 28.4mm Antenna for CTRL.5 / MDR.S 11-1134 NP-F976 L-Series 7.2V, 6600 MAh Li-Ion Battery for CTRL.5 11-1588 Bolt-On Monitor Hinge Cube11-1593 Kickstand for CTRL.511-1592 Hand Grip for CTRL.5

CTRL.5 raises the bar for wireless FIZ lens-control handsets with a 5-inch SmallHD Ultra-bright touchscreen powered by CTRL.OS, a task-specific evolution of SmallHD’s PageOS. View critical lens data overlays while pulling focus without taking your eyes off the video feed. Calibrate lenses to pre-marked focus rings and access configurations at any time via the touchscreen or one of eleven programmable function buttons. The hand unit includes a multitude of mounting points for accessories. CTRL.5 is fully cross-compatible across the Teradek RT Lens Control Ecosystem. The CTRL.5 is not compatible with the older RT overlay cables. You will need either the 5-pin to USB A (#11-1146) or the 5-pin to 5-pin cable (#11-0401) and depending on your monitor, the dual 5-pin USB Adapter (#11-0895) to convert your USB connection. The Teradek RT CTRL.5 is a state-of-the-art wireless lens control system designed for filmmakers seeking precision and reliability. This compact controller features a high-resolution touchscreen interface that allows for seamless focus, iris, and zoom adjustments. With a range of connectivity options, the CTRL.5 can integrate effortlessly with various lens types, providing filmmakers the flexibility to adapt to different shooting environments and requirements.Built to withstand the rigors of professional filmmaking, the CTRL.5 is lightweight yet robust, making it ideal for on-location shoots. Its intuitive design and responsive controls enable users to make real-time adjustments, ensuring every shot is executed with pinpoint accuracy. Whether you're working with high-end cinema cameras or versatile DSLR setups, the Teradek CTRL.5 enhances your workflow, enabling creative possibilities that elevate your storytelling.The CTRL.5’s advanced wireless capabilities eliminate the constraints of physical cables, giving you the freedom to move around the set while maintaining complete control over your lens functions. With a long battery life and reliable connectivity, this product is a must-have tool for cinematographers, camera operators, and production teams aiming to achieve cinematic excellence.Features of Teradek RT CTRL.55-inch Ultra-bright TouchscreenCTRL.OS - page-based operating system 11 programmable function buttonsVisual Lens LibraryCross-compatible with full Teradek RT Ecosystem Seamless focus, iris, and zoom control Compatible with various lens types Technical Specifications Power Input: NP-F Wireless Range: 5000 feetTouchscreen size: 5 inchesCompatibility: Teradek RT motor systemsMaterial: Aluminum and plasticDimensions and WeightsWeight: 1.83 lbs (830 g)Dimensions: 6.6 x 6.6 x 3.3 inches (16,8 x 16,8 x 8,3 cm)InterfacesConnectors: 5pin USB port and 4pin AUX portRunstop Control: RED (Epic, Scarlet, Weapon, Raven etc.)ARRI (Alexa, Amira etc.)Phantom, Sony F55LANC (Blackmagic, Canonc C100/300/500 Sony FS7)Axes: 4 total: Knob / Slider / Rocker / WheelBluetooth: Bolt Pairing and Control (coming soon)Display: 5" Highbright SmallHDIn the Box1x CTRL.51x Blank Ring2x 2.54GHz 28.4mm Antenna1x Black Silicone Knob GripUseful Accessories:11-1591 Screen Protector for CTRL.5 11-1138 SKB Case for CTRL.5 11-1139 2.4GHz 28.4mm Antenna for CTRL.5 / MDR.S 11-1134 NP-F976 L-Series 7.2V, 6600 MAh Li-Ion Battery for CTRL.5 11-1588 Bolt-On Monitor Hinge Cube11-1593 Kickstand for CTRL.511-1592 Hand Grip for CTRL.5 How to Update Your CTRL.5 Firmware (CTRL.OS Firmware Update)

Ranger’s best-in-class performance allows broadcasters, live production companies, churches, and government entities to implement real-time wireless workflows over licensed and unlicensed bands, from 4.9 GHz up to 6.4 GHz. And new for 2023, Ranger now includes 24 additional 20mhz RF channels over 6 GHz (U-NII 5), providing access to wireless spectrum rarely usedby other electronics. Features Up to 2160p60 Resolution 10-bit 4:2:2 Image Quality Transmitter: 12G-SDI & HDMI 2.0 Input, Looping 12G-SDI Output Receiver: 2x 12G-SDI, 1x HDMI 2.0Zero-Delay - go from TX to RX in .001 seconds Technical Specifications SDI / HDMI up to 1080p6010-bit HDRInput Output ScalingBroadcast Mode: 5000ft Models OnlyRanges: 750ft, 2500ft, 5000ftFrequencies Supported:Licensed:4.900 - 5.150 GHz5.350-5.470 GHz5.850-5.925 GHzUnlicensed:5.150-5.250 GHz (Non-DFS)5.250-5.350 GHz (DFS)5.470-5.725 GHz (DFS)5.725-5.850 GHz (Non-DFS)5.925-6.425 GHz (UNII-5)AES-256 EncryptionRF Power: 21 dbm EIRPMulticast: 1:6 (unlimited RX on 5000ft models when set to "Broadcast" mode)Suggested Form Factor: Camera-backBattery Mount Option: Gold Mount / Gold Mount 26V (TX/RX) and V-Lock Mount (TX/RX) Ranger AppManage Ranger from your device with the Ranger Manager app for iOS and Android.Pair and unpair transmitters and receivers with the touch of a buttonMeasure and analyze the frequency and amplitude of a signalView live channel strength for licensed/unlicensed bandsMonitor your live RF spectrum bandwith Item Codes: 10-2580-V: Ranger Mk II 750ft 3G-SDI/HDMI - Wireless TX/RX Set V-Mount10-2590-V: Ranger Mk II 2500ft 3G-SDI/HDMI - Wireless TX/RX Set V-Mount 10-2595-V: Ranger Mk II 5000ft 3G-SDI/HDMI - Wireless TX/RX Set V-Mount 

Ranger’s best-in-class performance allows broadcasters, live production companies, churches, and government entities to implement real-time wireless workflows over licensed and unlicensed bands, from 4.9 GHz up to 6.4 GHz. And new for 2023, Ranger now includes 24 additional 20mhz RF channels over 6 GHz (U-NII 5), providing access to wireless spectrum rarely usedby other electronics. Features Up to 2160p60 Resolution 10-bit 4:2:2 Image Quality Transmitter: 12G-SDI & HDMI 2.0 Input, Looping 12G-SDI Output Receiver: 2x 12G-SDI, 1x HDMI 2.0Zero-Delay - go from TX to RX in .001 seconds Technical Specifications SDI / HDMI up to 1080p6010-bit HDRInput Output ScalingBroadcast Mode: 5000ft Models OnlyRanges: 750ft, 2500ft, 5000ftFrequencies Supported:Licensed:4.900 - 5.150 GHz5.350-5.470 GHz5.850-5.925 GHzUnlicensed:5.150-5.250 GHz (Non-DFS)5.250-5.350 GHz (DFS)5.470-5.725 GHz (DFS)5.725-5.850 GHz (Non-DFS)5.925-6.425 GHz (UNII-5)AES-256 EncryptionRF Power: 21 dbm EIRPMulticast: 1:6 (unlimited RX on 5000ft models when set to "Broadcast" mode)Suggested Form Factor: Prosumer Cameras, Flycam, Rigging, DronesBattery Mount Option: Gold Mount / Gold Mount 26V (RX only) and V-Lock Mount (RX only) Ranger AppManage Ranger from your device with the Ranger Manager app for iOS and Android.Pair and unpair transmitters and receivers with the touch of a buttonMeasure and analyze the frequency and amplitude of a signalView live channel strength for licensed/unlicensed bandsMonitor your live RF spectrum bandwith Item Codes: 10-2530-V: Ranger Micro 750ft 3G-SDI/HDMI - Wireless TX/RX Set V-Mount10-2540-V: Ranger Micro 2500ft 3G-SDI/HDMI - Wireless TX/RX Set V-Mount 10-2555-V: Ranger Micro 5000ft 3G-SDI/HDMI - Wireless TX/RX Set V-Mount 

Prism Mobile is the most compact bonded cellular video encoder in its class, delivering reliable 4K HDR streaming from the most challenging locations for live coverage on the go and camera-to-cloud workflows. Mission-Critical Network Bonding: Get exceptional worldwide internet connectivity virtually anywhere with two internal high-throughput Node modems with high-gain antennas uniquely designed for video applications. For maximum redundancy, Prism Mobile can bond* up to 9 network connections across cell phone Hotspots (4x), Ethernet (2x), and Cellular Modems (3x) – ensuring your stream never misses a beat. Achieve Prism’s true potential with Core, Teradek’s streaming media orchestration platform. Core allows you to securely monitor, manage, route, distribute, and archive your live video feeds from anywhere in the world. Features Two built-in 5G or LTE modems with high-gain antennasCBRS & Private Mobile Network readyBuilt-in Network BondingHEVC / AVC Compression12G-SDI & HDMI i/oUp to 4Kp60 10-bit HDR video8 CH. Audio | 5.1 & 7.1 Surround soundLicenses for return video and multi-outputLow-SWaP Design: 864g with battery platesGold / V-Mount: 3hr Runtime (tested in ideal conditions with a 90Wh battery)On-Board Recording, Store and Forward and Camera-To-Cloud Ready (Core, Fram.io, Sony C3 Portal, Sony Ci, PIX, AVID)Multiple Protocols: SRT, MPEG-TS, RTMP(S), RT, RIST, RTSP, TRT, HLS, DASH, WHIPPrism app for iOS and AndroidCore Cloud compatible, Local Control SDK available  Available Models:10-2857-5SV Prism 857-5SV Mobile dual 5G SW V-Mount 10-2857-5SG2 Prism 857-5SG2 Mobile dual 5G SW 26V Gold Mount 10-2857-5SG Prism 857-5SG Mobile dual 5G SW Gold Mount 10-2857-5S Prism 857-5S Mobile dual 5G SW No Mount 10-2857-CV Prism 857-C Mobile Mk II HEVC/AVC Encoder V Mount10-2857-CG26 Prism 857-CG26 Mobile Mk II HEVC/AVC Encoder Gold Mount 26V 10-2857-CG Prism 857-CG Mobile Mk II HEVC/AVC Encoder Gold Mount 10-2857-C Prism 857-C Mobile Mk II HEVC/AVC Encoder

Teradek is committed to designing and manufacturing the highest quality RF antennas, prioritizing both performance and reliability. When engineering antennas, two key factors are essential: frequency coverage and gain. Frequency coverage ensures that the antennas can support the entire range of frequencies on which the Bolt system operates, while consistent antenna gain allows the antennas to generate a stable and consistent signal across all distance ranges and power output levels. Unfortunately, not all antennas are created equal. Many third-party antennas do not cover Bolt’s full frequency range, nor do they output the appropriate gain levels, resulting in poor signal performance and limited frequency (channel) options. Teradek takes great care in certifying and tuning each antenna individually during the manufacturing process. This rigorous attention to detail ensures that Teradek antennas deliver exceptional performance in the most demanding RF environments. The new flexible V-Antennas perform as well as their predecessors but feature a flexible base that enhances durability and resilience; ideal for even more challenging production conditions. These 2Bi antennas are fully compatible with all Bolt 4K and Bolt 6 models, in both V+V and V+H antenna configurations. The antennas cover the same 4.9 - 7.3 GHz frequencies and utilize the standard RP-SMA connector. Specifications: Flexible design prevents breakageWorks with Bolt 4K and Bolt 6RP-SMA ConnectorOutput: 2dBi 4.9-7.3Ghz#11-1147: Single Antenna (1 piece)#11-1148: Antenna pack (7 pieces)

Compatible with Prism Mobile, Prism Flex Mk II, Prism Mobile Backpack. Supercharge your production with the all new Node 5G cellular modem. The Node 5G supports the latest sub 6GHz frequencies matching worldwide standards.PerformanceThe Node 5G offers a higher level of performance. It supports 5G SA (Standalone) and NSA frequencies, increasing compatibility with networks worldwide. With Carrier aggregation and MIMO on uplink, the Node 5G can increase your upload connectivity and reliability for supported carriers in the most challenging environments. It delivers a maximum of 480 Mbps downlink and 480 Mbps uplink, providing more than enough bandwidth for your Prism and Serv devices.Carrier CompatibleNode 5G works with virtually any SIM card, and can operate on most 5G/LTE/4G/3G data bands in the world. In combination with Teradek products, the Node 5G can be customized for continued carrier support allowing custom firmware for specific carrier options.Node 5G can join private networks using band 48 or 5 such as Ericsson, Baicells, and many other networks for transporting video across private cellular networks.Node 5G is authorized to be provisioned with T-mobile and AT&T in the United States. It’s also authorized with Verizon Native Carrier when used with Teradek Data. Full Verizon certification is coming soon.Teradek Data readyThe Node 5G contains an eSIM slot that is provisioned to be Teradek Data ready.  Allowing continued and growing native carrier support.GPSNode 5G supports GPS mux’ed on it’s antenna for future uses with Teradek products or your third party application.Super Durable and Weather ResistantTraditional USB modems are easily broken during extended use in the field. Node 5G solves the durability problem with an aluminum chassis, 3 ¼”-20 mounting options, and a 5-pin locking connector to attach to your Teradek device or computer.*While a carrier may be supported, action may be required by the end user to authorize the modem. Features Latest 5G frequency and capabilityCBRS CapableGlobal internet connectivityExternal high-gain antennasUniveresal SIM compatibility Technical Specs Network +Carrier Aggregation: Up to 4x CA Downlink and 2x CA uplinkG Nsa Sa: N1/2/3/5/7/8/12/13/14/18/20/25/26/28/29/30/38/40/41/48/66/70/71/75/76/77/78/79Lte Fdd: B1/2/3/7/8/12/13/14/17/18/19/20/25/26/28/29/30/32/66/71Lte Tdd: B34/3/39/40/41/42/43/48 (CBRS Capable)Wcdma: B1/B2/B3/B4/B5/B8/B9/B19Gnss: GNSS GPS / GLONASS / BDS / Galileo / QZSS GPS / GLONASS / BDS / Galileo / QZSSData Rate:5G SA Sub-6/5G NSA sub-6: DL 480 Mbps; UL 480MbpsLTE: DL 480 Mbps; UL 5.76 MbpsWCDMA: DL 42 Mbps; UL 5.76 MbpsSIM: 1x Nano (4FF) SIM, 1x Teradek Standard Data Embedded simInterface: 2 Status LEDs, USB to 5-pin connectorPower input: 5-Pin Connecotr, 5VDimensions: 9,14 x 5,59 x 2,54Weight: 90g3x 1/4"-20 threaded hole  Available Models:10-0033-1-A: USB-A10-0033-1-C: USB-C10-0033-1-L: 5-Pin

Compatible with Prism Mobile, Prism Flex Mk II, Prism Mobile Backpack.Get exceptional internet connectivity anywhere in the World with the Node II: Teradek’s high-performance LTE/4G/3G modem. Node II gives you nearly world wide LTE band coverage and universal cellular SIM card compatibility and set to work with virtually every carrier*.PerformanceWith external high-gain antennas and the industrial-grade Cat. 12 LTE modem, Node II gives you robust connectivity in the most challenging broadband environments.Node II delivers 4x faster download speeds (Max. 480 Mbps) and 3x faster upload speeds (Max. 150 Mbps) than its predecessor and features dual MFF2 SIM slots (nano & micro SIM adapters included).Carrier CompatibleNode II works with virtually any plastic SIM card, and can operate on most LTE/4G/3G data bands in the world. It’s been tested with over 100 different carriers with a growing list.Node II is certified with Verizon in the United States for direct activation on business class accounts.Node II is also fully compatible with Teradek Data plastic eSIM- offering higher performance Native coverage from Teradek.Teradek Data readyThe Node II CBRS contains an eSIM slot that is provisioned with Teradek Standard Data;  allowing worldwide network support.Super Durable and Weather ResistantTraditional USB modems are easily broken during extended use in the field. Node II solves the durability problem with an aluminum chassis, 3 ¼”-20 mounting options, and a 5-pin locking connector to attach to your Teradek device. *While a carrier may be supported, action may be required by the end user to authorize the modem. Features High-powered LTE/4G/3G modemGlobal cellular serviceExternal high-gain antennaUniversal SIM compatibility Technical Specs Network +Lte Tdd: B1/B2/B3/B4/B5/B7/B8/B9/ B12/B13/B14/B17/B18/B19/B20/ B21/B25/B26/B28/B292 /B30/B32/ B66Lte Tdd:  B38/B39/B40/B41Wcdma: B1/B2/B3/B4/B5/B8/B9/B19Max Data Rates: LTE FDD Cat 12: Up to 480 Mb/s DL, 150 Mp/s ULSim: 1x Nano (4FF) SIM, 1x Teradek Standard Data Embedded simEmbedded Module: Quectel EM12-G FCC ID: XMR201901EM12GInterface: 2 Status LEDs, USB to 5-pin connectorPower input: 5-Pin Connecotr, 5VBattery: NoneNominal Power Consumption: 5W MaxDimensions: 6,27 x 3,81 x 3,05Weight: 90g3x 1/4"-20 threaded hole  Available Models:10-0028-1-A: USB-A10-0028-1-C: USB-C10-0028-1-L: 5-Pin

Serv 4K is an all-in-one production streaming solution that unites next-gen hardware with simplified UI to easily manage and share 4K HDR streams in real time, whether you’re collaborating on set or around the world. Serv 4K allows both local and cloud-based streaming with Teradek’s free VUER app (iOS and Android) and Multiple Core Cloud Platforms (MacOS, iOS, Android and Web Browsers) as well as third-party integrations like Frame.io. During Local Streaming, up to four live camera feeds can be streamed to multiple local devices at once, even without an internet connection. Cloud-based streaming can be shared with an unlimited number of devices via MacOS, iOS, Android, or web browsers.This next-gen hardware includes an updated fan for cooling efficiency, directional buttons for menu navigation and military-grade 256-bit encryption. Serv 4K (2024) continues to support up to 45mbps HEVC, 10bit 4:2:2 color, and DCI-P3 / PQ 2084 for consistent color-accuracy from first shot through final color.Serv 4K is easy to set up, easy to manage, and comes with tools to keep every stakeholder in the loop, wherever they are. Features4K HDR with 10-bit 4:2:2 StreamingHEVC and AVC Compression12G-SDI and Loop Through256-bit Military-Grade EncryptionCellular Bonding with Serv AppJoystick and Buttons Technical SpecsVideo Inputs: 1x 12G/6G/3G/HD/SD-SDI and 1x HDMI 2.0Video Output: 1x 12G/6G/3G/HD/SD-SDI and 1x HDMI 2.0HDR Support: YesSDI Compliance:Simultaneous bonding over up to 7 Networks:Ethernet, Wi-Fi, USB cellular modem, Up to 4 cellphones (iOS or Android)Bonding: Serv 4K AppSupports Resolutions up to 4K DCIp60Supported Video Bitrate: 250 Kbps to 85 MbpsNumber of Encoder Streams: Up to one 4K DCIp60 4:2:2 10bitColor Correction:CDL/1024 1D LUT (supports 10-bit color)33x33x33 3D LUT (supports 10-bit color)Configuration InterfacesFeature-rich Web UI for local device management, configuration, and controlIntuitive iOS/Android configuration app (teradek Serv)OLED Status Display w/Nav control buttonsCore for cloud-based device managementSwitches: On/Off switchRecording Storage: Full-size SD/SDXC (class 6 and above) formatted exFATUSB formatted FAT32, NFSMobile App: Teradek Serv for iOS and Android deviceCloud Services: Teradek Core, Frame.io, Sony Ci, PIXUsb Interface Functionality: 2x Powered USB-C host ports with 3G/4G modem supportDimensions: 15,0 x 10,7 x 3,6 cmWeight: 476gPower Input: 2pin circular locking connectorNominal Power Consumption: 18WAuxilary Power Input: 6-28V DC

  Ace 750 is a lightweight, compact, HDMI wireless video system with built-in antennas designed to be used with mirrorless cameras, camcorders, action cameras and A/V workflows. It sends uncompressed zero-delay, 4Kp30, HDR video and audio with up to 750 feet (230m) of range. Ace 750 is cross-compatible with Bolt 4K and Bolt 6 in 5GHz and 6GHz modes and is fully compliant with FCC and CE frequency usage and power output guidelines. Ace 750 features an integrated hole pattern for mounting and can be powered with NP-F or LP-E6 batteries using an optional L-shaped plate.The transmitter (TX) and receiver (RX) units automatically detect and select the 5Ghz or 6GHz RF channel with the least interference and employ Auto-Frequency Switching to maintain optimal signal quality. Ace comes paired out of the box. The TX can send video to up to six RX devices at the same time using the Bolt Manager app for iOS or Android.Ace 750 is built with the same reliable wireless technology found in our acclaimed Bolt product line. Because of this, Ace 750 is fully compatible with all Bolt 4K and Bolt 6 models. Features 4Kp30 10-bit HDR Zero-Delay wireless video (<0.001sec) Range: 750 feet / 228 m 6GHz auto frequency switching Multi-receiver capable - up to 6 Receivers per Transmitter 2x 2dBi internal antennas (AMC mode always on) Technical Specs Range: 750ft/ 228m LOS Video Inputs: 1x HDMI 1.4b Type-A receptacle Video Outputs: 1x HDMI 1.4b Type-A receptacle Color Sampling: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Power Input: Barrel conntecotr 7-18V Power Consuption: 6 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto only, 40 MHz only, no blocked frequencies Dimensions Transmitter: 11,2 x 8,1 x  2,54 cm / 4.39" x 3.19" x 1"Mountability: Multiple mounting options with M3 and 1/4-20” holes Weight: Transmitter: 187 g / 6.6 oz Multiple mounting options with M3 and 1/4" holes Configuration Interface: OLED display - Input video format, Selected frequency, Video Quality %, Link statusSwitched: On/Off Switch Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30 1080p 23.98/24/25/29.97/30/50/59.94/60 1080i50/59.94/60 720p50/59.94/60  What's In The Box? 1 x Ace 750 Transmitter 1 x Ace 750 Receiver 1 x Lightstand Adapter 1/4-20in 1 x Hot Shoe Adaptor 2 x Ultra Thin HDMI Male Type A - HDMI Male Type A - 18in Cable 1 x PSU 18W AC Adapter 12VDC - 6ft Cable 1 x PTap to r/a barrel - 18in Cable    

  Bolt 6 RX Monitor Module is a wireless video receiver that supports up to 4K30 10-bit 422 HDR video. Bolt 6 uses Teradek’s patented Zero-Delay silicon chip to send wireless video over 5GHz and 6GHz radio frequencies. The Bolt 6 Receiver Monitor Module easily attaches to the back of SmallHD’s Cine 7, 702 Touch, and Indie 7 Smart Monitors. With this direct integration, the Bolt 6 and Smart monitor can share power and video, allowing you to reduce the amount of cables on set. With the Bolt 6 Monitor Module, Wireless Camera-Control is also possible because it integrates directly into SmallHD Smart Monitors. Bolt 6 Monitor Module RX offers two line-of-sight options: 750 ft. and 1500 ft. Additionally, you can upgrade your set to include Gold or V-Mount Battery plates.The 750 model includes V (vertical) Antennas. 1500 model includes both V Antennas and H (horizontal) antennas. H Antennas are designed to maximize signal robustness in the most challenging RF environments. Optionally, the 750 model of Bolt 6 Monitor Module RX can include a permanent internal antenna to allow for reliable zero-delay transmission in a more compact and durable form factor. Bolt 6GHz HIGHLIGHTS 12 new 40MHz wide channels from 5.925 to 6.425GHz Enhanced long-range image quality algorithm New SDI pattern tool to monitor SDI signal quality Pairs with up to 6 receivers, or unlimited receivers when used in Broadcast mode with the MAX models Universal compatibility with all Bolt 6 and Bolt 4K Series AES-256 encryption and RSA 1024 key pairing prevents unauthorized access Features Receive Wireless Video up to DCI 4K Zero-Delay wireless video (<0.001sec) 750 feet of range 4K HDR with 10-bit 4:2:2 Transmit 4Kp30 with HDMI; 1080p60 with SDI Gold & V-Mount Battery Plate options 4x Internal 2dBi Antennas Technical Specs Range: 750ft/ 228m LOS Video Inputs: 1x HDMI 1.4b Type-A receptacle Video Outputs: wireless SDI ancillary Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Color Sampling: HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: HDMI to SDI (4Kp23.98/30 HDMI input is scaled and looped out as 1080p23.98/30 on SDI loopout) Power Input: 2-pin Connector 6-18 VDC Power Consuption: 7 Watt Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels) Dimensions Transmitter: 6x 10,3x 3,3 cm / 2.4"x 4.1"x 1.3" Mountability: SmallHD Smart7 Monitor Weight: Transmitter: 206g / 7.3oz Multiple mounting options with M3 and 1/4" holes Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz 5.755 ~ 5.795 GHz 5.945 ~ 6.425 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz  Compare Chart: Ghz Support: Yes Compatible with Bolt 4K: Yes Availalbe Ranges: 750ft and 1500ft Maximum SDI Resolution: No Maximum HDMI Resolution: Yes SmallHD Wireless Camera Control Port: UHDp30 Receiver Connectivity: Zero delay  What's In The Box? Bolt 6 Monitor Module 750 RX V-Mount HDMI Adapter Bolt 4K RX Monitor Module    

  Bolt 6 LT is a wireless video transmission system that supports up to 1080p60 10-bit 422 HDR video over 3G-SDI, or 4K30 over HDMI. Bolt 6 uses Teradek’s patented Zero-Delay silicon chip to send wireless video over 5GHz and 6GHz radio frequencies. Bolt 6 LT Sets offers three line-of-sight options: 750 ft., 1500 ft., and the MAX model, which can be configured for up to 5,000 ft when using the optional Array Antenna and Broadcast Mode. In the MAX model, Broadcast Mode also allows users to increase the number of Receivers from 6 per Transmitter to unlimited per Transmitter. The 750 model includes V (vertical) antennas. 1500 and MAX models include both V antennas and H (horizontal) antennas. H antennas are designed to maximize signal robustness in the most challenging RF environments. Optionally, the 750 model of Bolt 6 LT can include permanent internal antennas to allow for reliable zero-delay transmission in a more compact and durable form factor. Kit options include the Transmitter and Receiver by themselves or within a Deluxe kit that also includes Gold or V-Mount Battery plates. Bolt 6GHz HIGHLIGHTS 12 new 40MHz wide channels from 5.925 to 6.425GHz Enhanced long-range image quality algorithm New SDI pattern tool to monitor SDI signal quality Pairs with up to 6 receivers, or unlimited receivers when used in Broadcast mode with the MAX models Universal compatibility with all Bolt 6 and Bolt 4K Series AES-256 encryption and RSA 1024 key pairing prevents unauthorized access Features Receive Wireless Video up to DCI 4K Zero-Delay wireless video (<0.001sec) 750 feet of range 4K HDR with 10-bit 4:2:2 Transmit 4Kp30 with HDMI; 1080p60 with SDI Gold & V-Mount Battery Plate options 4x Internal 2dBi Antennas Technical Specs Range: 750ft/ 228m LOS Video Inputs: 1x 3G-SDI SMPTE 424M standard/75 Ω, 1x HDMI Type-A receptacle* 1x Loop-out 3G-SDI on Transmitter Video Outputs: 1x 3G-SDI SMPTE 424M standard/75 Ω, 1x HDMI Type-A receptacle SDI ancillary Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: HDMI to SDI (4Kp23.98/30 HDMI input is scaled and looped out as 1080p23.98/30 on SDI loopout) Power Input: 2-pin Connector 6-28 VDC Power Consuption: TX: 9 Watts; RX: 11 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels) Dimensions Transmitter: 7,2 x 12 x 3,3 cm Dimensions Receiver: 12,2 x 10,6 x 2,7 cm Weight: Transmitter: 212g Weight: Receiver: 304 Multiple mounting options with M3 and 1/4" holes Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30 (HDMI only) 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz 5.755 ~ 5.795 GHz 5.945 ~ 6.425 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz  What's In The Box? 1 x Bolt 6 LT 750 TX Int. Antennas 1 x Bolt 6 LT 750 RX V-Mount Int. Antennas 1 x Lightstand Adapter ¼-20in 1 x Hot Shoe Adaptor 1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable2 x SDI - BNC to BNC Cable, 10in 1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft Cable 1 x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable    

  Bolt 6 LT is a wireless video transmission system that supports up to 1080p60 10-bit 422 HDR video over 3G-SDI, or 4K30 over HDMI. Bolt 6 uses Teradek’s patented Zero-Delay silicon chip to send wireless video over 5GHz and 6GHz radio frequencies. Bolt 6 LT Sets offers three line-of-sight options: 750 ft., 1500 ft., and the MAX model, which can be configured for up to 5,000 ft when using the optional Array Antenna and Broadcast Mode. In the MAX model, Broadcast Mode also allows users to increase the number of Receivers from 6 per Transmitter to unlimited per Transmitter. The 750 model includes V (vertical) antennas. 1500 and MAX models include both V antennas and H (horizontal) antennas. H antennas are designed to maximize signal robustness in the most challenging RF environments. Optionally, the 750 model of Bolt 6 LT can include permanent internal antennas to allow for reliable zero-delay transmission in a more compact and durable form factor. Kit options include the Transmitter and Receiver by themselves or within a Deluxe kit that also includes Gold or V-Mount Battery plates. Bolt 6GHz HIGHLIGHTS 12 new 40MHz wide channels from 5.925 to 6.425GHz Enhanced long-range image quality algorithm New SDI pattern tool to monitor SDI signal quality Pairs with up to 6 receivers, or unlimited receivers when used in Broadcast mode with the MAX models Universal compatibility with all Bolt 6 and Bolt 4K Series AES-256 encryption and RSA 1024 key pairing prevents unauthorized access Features Receive Wireless Video up to DCI 4K Zero-Delay wireless video (<0.001sec) 750 feet of range 4K HDR with 10-bit 4:2:2 Transmit 4Kp30 with HDMI; 1080p60 with SDI Gold & V-Mount Battery Plate options 4x Internal 2dBi Antennas Technical Specs Range: 750ft/ 228m LOS Video Inputs: 1x 3G-SDI SMPTE 424M standard/75 Ω, 1x HDMI Type-A receptacle* 1x Loop-out 3G-SDI on Transmitter Video Outputs: 1x 3G-SDI SMPTE 424M standard/75 Ω, 1x HDMI Type-A receptacle SDI ancillary Data Support: Metadata, TC, start/stop flags from certain camera manafacturers Color Sampling: SDI: YCbCr 4:2:2, 10bit / HDMI: RGB 4:4:4, 8-bit Delay: <0.001sec Video Compression: visually lossless Input Cross Conversion: HDMI to SDI (4Kp23.98/30 HDMI input is scaled and looped out as 1080p23.98/30 on SDI loopout) Power Input: 2-pin Connector 6-28 VDC Power Consuption: TX: 9 Watts; RX: 11 Watts Audio compression: 48kHz 24-bit PCM RF Channel Selection: Auto, Manual (Manual available for Non-DFS Channels) Dimensions Transmitter: 7,2 x 12 x 3,3 cm Dimensions Receiver: 12,2 x 10,6 x 2,7 cm Weight: Transmitter: 212g Weight: Receiver: 304 Multiple mounting options with M3 and 1/4" holes Configuration Interface: OSD with Menu Joystick Navigation Desktop App (Bolt Manager for OSX & Windows), Bolt APP Support Resolutions:  4Kp23.98/24/25/29.97/30 (HDMI only) 1080p 23.98/24/25/29.97/30/50/59.94/60 1080psf23.98/24/25/29.97/30 1080i50/59.94/60 720p50/59.94/60 480p59.94/576p50 480i(NTSC)/576i(PAL) Wireless Non-DFS Frequencies: 5.190 ~ 5.230 GHz 5.755 ~ 5.795 GHz 5.945 ~ 6.425 GHz Wireless DFS Frequencies: 5.270 ~ 5.670 GHz  What's In The Box? 1 x Bolt 6 LT 750 TX 1 x Bolt 6 LT 750 RX 1 x Lightstand Adapter ¼-20in 1 x Hot Shoe Adaptor 1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable2 x SDI - BNC to BNC Cable, 10in 1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft Cable 1 x USB Male Type A (Full) - USB Male Type B (Micro) -3ft Cable    

Link AX expands your production networking capabilities with a ruggedized, set-ready aluminum chassis wrapped around a Wi-Fi 6 (802.11AX) router. Use Link AX for multiple workflow scenarios: more cameras and devices on your local production streaming network, camera-to-cloud for multiple cameras; simultaneous camera-control over multiple cameras. FEATURES Built for Production Wi-Fi monitoring with multiple Serv devices 20 independent viewers using VUER HDR app on mobile devices Add an internet connection to enable remote monitoring or camera-to-cloud workflows Simultaneous control of multiple cameras over Wi-Fi Rugged Design Robust Aluminum Chassis Gold-Mount and V-Mount Battery Plate Options ⅜” and ¼”-20 Mounting Points 5 customizable ethernet ports USB-A for cellular modems like Node II with Teradek Data    In the Box 1 x Link AX Wireless Access Point Router 5 Port (V-Mount) 1 x Lightstand Adapter 3/8in 1 x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable   Ships in June

The Teradek Link AX WiFi Router/Access Point is a robust solution designed specifically for filmmakers and content creators seeking reliable and high-speed wireless connectivity in various production environments. With advanced 802.11ax technology, the Link AX delivers exceptional performance, ensuring stable and seamless connections for video streaming, file transfers, and remote monitoring. Whether on a film set, during live events, or in remote locations, this device provides the robust connectivity necessary for professional production workflows.Featuring dual-band functionality, the Link AX supports both 2.4GHz and 5GHz bands, allowing for flexible network management and enhanced coverage. Its rugged design ensures durability in demanding environments, making it perfect for outdoor shoots or studio settings. The user-friendly web interface simplifies configuration and monitoring, enabling users to manage their networks with ease. Furthermore, the Link AX is capable of supporting multiple devices simultaneously, making it ideal for collaborative projects where multiple crew members need access to the same network.With additional features such as Power over Ethernet (PoE) support and compatibility with Teradek's ecosystem, the Link AX is a versatile addition to any production setup. It not only enhances the capabilities of wireless video transmission systems but also serves as a reliable access point for internet connectivity. With its exceptional performance and ease of use, the Teradek Link AX WiFi Router/Access Point is a must-have tool for any serious filmmaker.Features of Teradek Link AX802.11ax (Wi-Fi 6) technologyDual-band support (2.4GHz and 5GHz)Power over Ethernet (PoE) capabilityUser-friendly web interface for easy configurationSupports multiple simultaneous connectionsRugged and durable designCompatibility with Teradek's ecosystemHigh-speed data transmissionTechnical SpecificationsWi-Fi standard: 802.11axMax data rate: Up to 1.2 Gbps (5GHz) and 574 Mbps (2.4GHz)Power input: PoE or 12V DCOperating temperature: -20°C to 60°CDimensions: 6.1 x 5.1 x 1.3 inches (155 x 130 x 33 mm)Weight: 1.0 lbs (454 g)Network ports: 1 x Gigabit EthernetAntenna type: Internal and external antennasDimensions and WeightsWeight: 1.0 lbs (454 g)Dimensions: 6.1 x 5.1 x 1.3 inches (155 x 130 x 33 mm)Delivery ScopeTeradek Link AX WiFi Router/Access PointPower supplyMounting hardwareUser manualWarranty card

The Video-Aware, Ultra-Low Latency Streaming Protocol. ART - Adaptive Reliable TransportART is a resilient, ultra-low latency streaming protocol for mission-critical video transport over public networks.ART is a streaming protocol that delivers secure, ultra-low latency (ULL), broadcast-quality audio and video over the public Internet. ART utilizes joint source channel coding to evaluate video content and network characteristics simultaneously, optimizing for both in one step. The result is a highly resilient,adaptive video stream that ensures the quality and integrity of your content over the most challenging network conditions.Built on award-winning technology, ART was developed using the same methodology behind Teradek’s Emmy® and Academy Award-winning Bolt wireless video system. FEATURES 100ms latecy over WAN Support for HD and 4K workflows AES-256 encryption Extremely resilient with rapid recovery No re-transmission delays Easy firewall traversal Rapid recovery over challenging networks By-directional. Simultaneous encoder and decoder per device.    TECHNICAL SPECS Video Video Inputs: 1x SD/HD/3G/6G-SDI (75 Ω BNC) and 1x HDMI Type-A Video Output: 1x SD/HD/3G/6G-SDI (75 Ω BNC and 1x HDMI Type-A Supported Resolutions 4Kp 23.98/24/29.97/30 1080p 23.98/24/25/29.97/30/50/59.94/60 1080i 50/59.94/60 720p50/59.94/60 Video Processing Video Compression/Depression: ISO MPEG-H Part 2: High Efficiency Video Coding (HEVC)/ITU H.265 HEVC: Main Supported Video Transport Protocols: ART Supported Video Bitrate: 4000 kbps to 30 Mbps Format Conversion: Built-in video scaler and deinterlacer Audio Processing Input/Output: Embedded SDI/HDMI Audio Compression: AAC-LC (128kbps, 192Kbps, 256Kbps) Audio Channels (Embedded): Mono, Stereo, Surround, 7.1 Audio Sample Rate: 48Khz Interfaces Configuration Interface: Featurerich Web UI for configuration and control, LED Indicators Ethernet: 2x 10/100/1000 BASE-T Gigabit Ethernet (RJ45) Encryption: AES-256 Power Input: 110 to 240 VAC Consumption: 495 W  Physical Attributes: Rackmount: 2 RU Dimensions: 43,2 x 30,7 x 8,9 cm Weight: 4.1Kg  

The Bolt 6 Color Bands from Teradek are designed for the Bolt 6 Transmitters and Receivers. They fit atop of your Bolt TX and RX so as to help differentiate which units are paired together.   Choose from XT or LT kits of 8 bands, or select single color bands to suit your needs.     The XT Kit includes   Bolt 6 XT TX Color Band (Red Rubber) Bolt 6 XT TX Color Band (Yellow Rubber) Bolt 6 XT TX Color Band (Green Rubber) Bolt 6 XT TX Color Band (Blue Rubber) Bolt 6 XT RX Color Band (Red Rubber) Bolt 6 XT RX Color Band (Yellow Rubber) Bolt 6 XT RX Color Band (Green Rubber) Bolt 6 XT RX Color Band (Blue Rubber)     Part no. for single rubber bands - LT - Transmitter: Red: #11-0915Blue: #11-0918Yellow: #11-0916Green: #11-0917 Part no. for single rubber bands - LT - Receiver: Red: #11-0919Blue: #11-0922Yellow: #11-0920Green: #11-0921  

The Bolt 6 Color Bands from Teradek are designed for the Bolt 6 Transmitters and Receivers. They fit atop of your Bolt TX and RX so as to help differentiate which units are paired together.   Choose from XT or LT kits of 8 bands, or select single color bands to suit your needs.     The XT Kit includes   Bolt 6 XT TX Color Band (Red Rubber) Bolt 6 XT TX Color Band (Yellow Rubber) Bolt 6 XT TX Color Band (Green Rubber) Bolt 6 XT TX Color Band (Blue Rubber) Bolt 6 XT RX Color Band (Red Rubber) Bolt 6 XT RX Color Band (Yellow Rubber) Bolt 6 XT RX Color Band (Green Rubber) Bolt 6 XT RX Color Band (Blue Rubber)     Part no. for single rubber bands - XT - Transmitter: Red: #11-0907Blue: #11-0910Yellow: #11-0908Green: #11-0909 Part no. for single rubber bands - XT - Receiver: Red: #11-0911Blue: #11-0914Yellow: #11-0912Green: #11-0913