The 30L carbon fiber tripod OConnor replaces the legacy 25L and 35L lines of tripods. Combining the benefits of new-age materials with precision engineering we have created a support system which is both lightweight, yet solid and stable, an ideal fit for the new generation of smaller new Ultimate 1030D & 1030Ds fluid heads.   The head supports 30 pounds worth of camera and accessories at a C.O.G. (center of gravity) 6 inches above the camera platform. The counterbalance system helps prevent the camera from tilting forward or back on the head on its own, and to remain in the position the operator places it without requiring additional effort to hold it in place. The counterbalance system on the 1030D is a stepless system, so it is continuously variable from the maximum weight the head can support all the way down to zero. This makes the 1030D extremely versatile, and suitable for use with heavy ENG style cameras all the way down to lightweight cameras, while maintaining the same operational feel.   The 1030D features interchangeable camera platforms, and comes with a sidelock platform and sliding baseplate as standard. The sidelock platform allows you to mount and remove the camera by lifting straight off the head and not having to slide it in from the back. The fluid head is able to tilt 90 degrees forward and backward, allowing you to tilt the camera straight down and then straight up, all in the same shot. The camera also features independent drag controls and locks for both the pan and tilt. The included 100mm ball base is removable and can be replaced with other available bases. The head features an integrated bubble level for quick leveling confirmation, and the level is illuminated for times you are working in dim light conditions. The included pan handle can be attached to either side of the the fluid head utilizing the mounting rosette on either side of the head.   FEATURES   Dual-stage, carbon fiber, 100mm bowl tripod Weighs only 8.8 pounds but supports up to 209 pounds For OConnor 1030D/1030Ds and other 100mm-ball heads Compatible with 30L and 60L OConnor tripods, as well as all Sachtler 100 and 150 bowl tripods (with exception of DA 100 K, DA 150K, and Cine) Adjustable spreader legs    

The 30L carbon fiber tripod OConnor replaces the legacy 25L and 35L lines of tripods. Combining the benefits of new-age materials with precision engineering we have created a support system which is both lightweight, yet solid and stable, an ideal fit for the new generation of smaller new Ultimate 1030D & 1030Ds fluid heads. The head supports 30 pounds worth of camera and accessories at a C.O.G. (center of gravity) 6 inches above the camera platform. The counterbalance system helps prevent the camera from tilting forward or back on the head on its own, and to remain in the position the operator places it without requiring additional effort to hold it in place. The counterbalance system on the 1030D is a stepless system, so it is continuously variable from the maximum weight the head can support all the way down to zero. This makes the 1030D extremely versatile, and suitable for use with heavy ENG style cameras all the way down to lightweight cameras, while maintaining the same operational feel.   The 1030D features interchangeable camera platforms, and comes with a sidelock platform and sliding baseplate as standard. The sidelock platform allows you to mount and remove the camera by lifting straight off the head and not having to slide it in from the back. The fluid head is able to tilt 90 degrees forward and backward, allowing you to tilt the camera straight down and then straight up, all in the same shot. The camera also features independent drag controls and locks for both the pan and tilt. The included 100mm ball base is removable and can be replaced with other available bases. The head features an integrated bubble level for quick leveling confirmation, and the level is illuminated for times you are working in dim light conditions. The included pan handle can be attached to either side of the the fluid head utilizing the mounting rosette on either side of the head. FEATURES Dual-stage, carbon fiber, 100mm bowl tripod Weighs only 8.8 pounds but supports up to 209 pounds For OConnor 1030D/1030Ds and other 100mm-ball heads Compatible with 30L and 60L OConnor tripods, as well as all Sachtler 100 and 150 bowl tripods (with exception of DA 100 K, DA 150K, and Cine) Adjustable spreader legs  

The 30L carbon fiber tripod OConnor replaces the legacy 25L and 35L lines of tripods. Combining the benefits of new-age materials with precision engineering they have created a support system which is both lightweight, yet solid and stable. OConnor's 1030Ds Fluid Head Package is an updated version of the previous 1030Ds Fluid Head Package, with the difference being a change in top platforms. The new package includes a sideload quick release top platform. The previous package was offered with a mini European quick release top platform. The sideload platform affords an extended range of movement for balancing front-heavy setups. The remaining components of the package are: the 1030Ds head with a 100mm ball base, a 100mm tie down for the base, a 12" pan handle, and an 11.5" handle extension. The ball base is compatible with 100mm tripod bowls and is interchangeable for optional 1030-compatible 150mm bases and with Mitchell flat bases. The handle has a 30° bend. The head features a +/- 60° tilt range and within this range supports payloads of 53 lbs at 4" above the platform, 41 lbs at 6", and 33 lbs at 8". Tilt drag is stepless. Counterbalance reaches all the way down to zero, useful for lighter cameras. Counterbalance adjusts by a crank-style control that pulls out of the rear of the head. Pan and tilt unlock through a single-handed squeeze. The package is compatible with many 1030 accessories.  

  The 30L carbon fiber tripod OConnor replaces the legacy 25L and 35L lines of tripods. Combining the benefits of new-age materials with precision engineering they have created a support system which is both lightweight, yet solid and stable.   OConnor's 1030Ds Fluid Head Package is an updated version of the previous 1030Ds Fluid Head Package, with the difference being a change in top platforms. The new package includes a sideload quick release top platform. The previous package was offered with a mini European quick release top platform. The sideload platform affords an extended range of movement for balancing front-heavy setups. The remaining components of the package are: the 1030Ds head with a 100mm ball base, a 100mm tie down for the base, a 12" pan handle, and an 11.5" handle extension. The ball base is compatible with 100mm tripod bowls and is interchangeable for optional 1030-compatible 150mm bases and with Mitchell flat bases. The handle has a 30° bend.   The head features a +/- 60° tilt range and within this range supports payloads of 53 lbs at 4" above the platform, 41 lbs at 6", and 33 lbs at 8". Tilt drag is stepless. Counterbalance reaches all the way down to zero, useful for lighter cameras. Counterbalance adjusts by a crank-style control that pulls out of the rear of the head. Pan and tilt unlock through a single-handed squeeze. The package is compatible with many 1030 accessories.      

OConnor precision with flowtech speed.The Oconnor Ultimate 1040 flowtech100 system brings together the precision ultra-smooth fluid camera movement that has made OConnor heads the cinematography industry standard together with the award-winning speed, agility and stability of the flowtech tripod system.The unique OConnor edition of the carbon fibre flowtech®100 tripod provides camera operators with an incredibly fast, lightweight and easy-to-setup camera support with revolutionary quick release brakes and rubber feet for speed with stability.The tripod is perfectly complemented by the Ultimate 1040 fluid head that delivers a continuous, ultra-smooth pan and tilt fluid drag system for ultimate control and stability together with OConnor’s unrivalled Sinusoidal Counterbalance system for true, accurate balance at any point in the tilt range and counterbalance down to zero for perfect balance no matter the payload. Made with high-performance magnesium, and aluminium alloys with stainless steel and genuine carbon fibre finishing, the Ultimate 1040 head is built to deliver consistent results on the most demanding sets.One of the most versatile camera support systems available - able to support payloads from 0 to 45lbs (20kg) at 5” (15cm) centre of gravity and a +/- 90 tilt range - the Ultimate 1040 flowtech100 System is the perfect camera support system for cinematographers who need to move from heavier to lighter payload camera setups without compromise.System includes       1040 Fluid Head Package: C1265-0001 flowtech® 100 Tripod & Feet: C1266-0002 Handle: S2051-1061 Case: C1254-0001  

Industry leading cinematographers are turning to the OConnor 120EX head. With the smooth OConnor feel and infinitely adjustable control, this patented head is the only product on the market to balance the huge capacity range of 30 – 240 lbs (14 – 109 kg). FEATURES OConnor’s fluid heads are famous for ultimate control and stability for film style shooting. With the use of EX-technology OConnor can offer the features it has become famous for while offering an additional benefit: extended capacity. With a patented stepless counterbalance mechanism at the heart of EX-technology, the 120EX can be boosted into EX-mode to achieve a whole new realm of support. Getting more than100%! This is the best way to describe the EX-Mode. The 120EX head has a given payload capacity of 120 lbs (54 kg) for the ±90° tilt range. With traditional counterbalance mechanisms any payload heavier than this maximum weight can’t be balanced. Not with the 120EX. EX fluid heads can go far beyond their maximum payload by slowly limiting tilt range as the payload is increased. The maximum payload is reached at a tilt range of ±60°, which for the 120EX is an incredible 240 lbs (109 kg) based on a 8” center of gravity.

The new OConnor 60L carbon fiber tripod offers a superior lightweight support option for the OConnor Ultimate 2065 and 2575D fluid heads. The tripod combines the benefits of new-age materials with precision engineering to provide a support system that is lighter weight with fast setup features, yet solid enough to carry large film camera configurations. The Ultimate 2560 Fluid Head Package from OConnor is designed for use with the current crop of digital cinema cameras. Weighing less than 18 pounds, 2560 is capable of supporting camera payloads up to 66 pounds at a 6" center of gravity above the platform, making it well suited for cameras such as the ARRI Alexa in a portable configuration or any lightweight digital cinema camera in a full studio configuration. The head comes packaged with both a Mitchell base and a 150mm ball base adapter with tie-downs for expanded tripod compatibility. It also comes with a large Euro-style quick release for rapid mounting and dismounting of large camera rigs, a pan handle, and a pan handle extension. Crafted for cine-style shooting, the head design delivers cinema standard positioning of controls, including brakes and rosettes, for easy and intuitive use. The 2560 fluid head also features OConnor's patented sinusoidal counterbalance system for accurate balance at any point in the tilt range. In combination with the step-less, smooth pan and tilt fluid drag, the 2560 delivers control and stability for digital cinema shooters.   FEATURES Supports up to 66 pounds at 6" center of gravity above the platform Magnesium frame and carbon fiber cover keeps weight under 18 lb Cinema standard positioning of controls, including brakes and rosettes Sinusoidal counterbalance system Stepless pan and tilt fluid drag Mitchell base and 150mm ball base adapter with tiedowns Euro-style quick release Pan handle with pan handle extension  

The new OConnor 60L carbon fiber tripod offers a superior lightweight support option for the OConnor Ultimate 2065 and 2575D fluid heads. The tripod combines the benefits of new-age materials with precision engineering to provide a support system that is lighter weight with fast setup features, yet solid enough to carry large film camera configurations. The Ultimate 2560 Fluid Head Package from OConnor is designed for use with the current crop of digital cinema cameras. Weighing less than 18 pounds, 2560 is capable of supporting camera payloads up to 66 pounds at a 6" center of gravity above the platform, making it well suited for cameras such as the ARRI Alexa in a portable configuration or any lightweight digital cinema camera in a full studio configuration. The head comes packaged with both a Mitchell base and a 150mm ball base adapter with tie-downs for expanded tripod compatibility. It also comes with a large Euro-style quick release for rapid mounting and dismounting of large camera rigs, a pan handle, and a pan handle extension. Crafted for cine-style shooting, the head design delivers cinema standard positioning of controls, including brakes and rosettes, for easy and intuitive use. The 2560 fluid head also features OConnor's patented sinusoidal counterbalance system for accurate balance at any point in the tilt range. In combination with the step-less, smooth pan and tilt fluid drag, the 2560 delivers control and stability for digital cinema shooters.   FEATURES Supports up to 66 pounds at 6" center of gravity above the platform Magnesium frame and carbon fiber cover keeps weight under 18 lb Cinema standard positioning of controls, including brakes and rosettes Sinusoidal counterbalance system Stepless pan and tilt fluid drag Mitchell base and 150mm ball base adapter with tiedowns Euro-style quick release Pan handle with pan handle extension

The Ultimate 2575D Head & Cine HD 150mm Bowl Tripod System from OConnor includes the Ultimate 2575D fluid head package, Cine HD single-stage tripod system with 150mm bowl, and a floor spreader. The fluid head is capable of supporting camera payloads up to 133 lb at a 4" center of gravity above the platform, and it offers a ±90° tilt range. The fluid head package comes with a 12" pan handle with 30° bend and a 11.5" pan handle extension. It also comes packaged with both a Mitchell base and a 150mm ball base adapters with tie-downs for expanded tripod compatibility. FEATURES As the next generation head of the highly successful 2575 series, the 2575D retains a large number of features and functions from the older heads but includes many new features: Platform controls on the operator’s side of the head Platform release lever with a one touch finger actuated safety release catch - allowing for one “finger” or hand action to undo the safety catch and open the lever Dual platform scales Platform with 4 handle rosettes Soft hand rest on left hand side The CINE HD & CINE HD BABY tripod is the perfect choice for heavy payloads that must be supported in a safe and reliable manner. The aluminum Cine HD tripod on its own can support payloads up to 309 lb and offers height adjustment from 33.6 to 69.2". The floor spreader enhances the stability of the tripod with heavy loads, and provides protection for delicate floor surfaces.  

OConnor's new 30L tripod system features an expanded payload range in a lightweight package that makes it the perfect companion for the new 1030D and 1030Ds Ultimate Fluid Heads.At just 8.8 lbs (4 kg) the 30L's double extension design ensures it can safely and stably carry payloads of up to 209 lbs (95 kg) even at its maximum height of 63.4" (161 cm). And the 30L is versatile. Despite its generous height range, it folds down to a mere 29.5” (75 cm) for convenient travel. A smart quick clamping system offers secure and visible tripod lockdown. The system's integral spreader system offers easy trouble-free security. Removable rubber feet expose spikes for optimal traction and payload safety on a variety of surfaces. SPECIFICATIONS Type: 2-Stage TripodMaterial: Carbon FiberCapacity: 209 lbs. (95 kg)Weight8.8 lbs: (4 kg) tripod onlyMaximum Height: 61.8 in. (157 cm)Minimum Height: 22 in. (56 cm)Top Casting: 100 mm Ball BaseCollapsed Length: 29.5 in. (75 cm)Includes: Mid-Leg spreader, Set of 3 Rubber feet  

OConnor's 60L is a lighter weight, speedy setup tripod with a Mitchell top or 150 mm bowl, making it the ideal choice for professional cinematographers who require a flexible shooting package for larger cameras.The 60L weighs just 9 lbs (4.1 kg) and has a double extension design that is safe and stable carrying payloads of up to 209 lbs (95 kg), even at its maximum height of 60.6" (154 cm). Despite its generous height range it folds down to a mere 29.9" (76 cm). The smart quick clamping system includes visible tripod clamp lockdown and this is coupled with a pre-set mid-level spreader to ensure secure, easy deployment in every situation. Removable rubber feet expose spikes for optimal traction and payload safety on a variety of surfaces. SPECIFICATIONS Type: 2-Stage TripodMaterial: Carbon FiberCapacity: 209 lbs. (95 kg)Weight: 9 lbs (4.1 kg) tripod onlyMaximum Height: 60.6 in. (154 cm)Minimum Height: 22.8 in. (58 cm)Top Casting: Mitchell or 150mm bowlCollapsed Length: 29.9 in. (76 cm)Includes: Mid-Leg spreader, Set of 3 Rubber feet    

The CINE HD tripod is the perfect choice for heavy payloads that must be supported in a safe and reliable manner. SPECIFICATIONS Material: AluminiumCapacity: 309 lbs. (140 kg)Weight: 29.3 lbs. (13.3 kg) (with Spreader)Maximum Height: 69.2 in. (175.8 cm)Minimum Height: 33.6 in. (85.3 cm)Top Casting: Mitchell or 150 mmCollapsed Length: 240.4 in. (103 cm)Collapsed Width: 11.1 in. (28.2 cm)Includes: (spreader sold seperately)  

Join the tripod revolution with the OConnor edition of the award winning flowtech100. The unique carbon fibre flowtech100 tripod provides cinematographers with an incredibly fast, lightweight and easy-to-setup camera support with revolutionary quick release brakes and rubber feet for speed with stability. With a 100mm bowl, the OConnor flowtech100 is able to support a payload of up to 30kg (66lb).Deploy and adjust your tripod in an instant: Unique quick release brakes - Easy to transport and exceptional torsional stiffness: Ergonomic carbon fibre leg design - Capture extremely low and high shots: Versatile hinge lock mechanism - Fast and stable setup in narrow spaces or on uneven terrain: Unique carbon fibre mid-level spreader - Superior performance and reliability: Extensive endurance and environmental testing Features Type: 2-Stage Tripod Material: Carbon Fiber Capacity: 66 lbs. (30 kg) Weight     7.01 lbs (3.2 kg) tripod only Maximum Height: 60.2 in. (153 cm) spreaderless mode Minimum Height: 10.2 in. (26 cm) spreaderless mode Top Casting: 3x 3/8" thread, 100mm bowl Collapsed Length: 29.9 in. (76 cm) System includes:       flowtech® 100 tripod       Set of 3 Rubber feet       Attachment mount  

The Ultimate 1030D and 1030Ds fluid heads offer a wealth of features that have been borrowed from the larger OConnor 2575 and 2065 heads to let cinematographers seamlessly transition from heavier to lighter payload camera setups. These include the stepless, ultra-smooth pan and tilt fluid drag specifically enhanced to provide ultimate control and stability, as well as the patented OConnor Sinusoidal Counterbalance system that provides true, accurate balance at any point in the tilt range. Users will appreciate that the system counterbalances down to zero, a handy advantage considering the trend to lighter weight cameras.   FEATURES The new ergonomic crank-style counterbalance control simply pulls out of the rear of the head. Plus the Action Brakes for pan and tilt unlock through a single-handed squeeze. And the new sideload platform enables rapid attachment of the camera as well as an extended range of movement for balancing front heavy setups. For today’s versatile shooter, the transition from larger to smaller payloads has never been easier. And most importantly, the famous OConnor feel, remains the same regardless of payload. The OConnor 1030D supports a payload up to 30 lbs. (13.6 kg) at a 6” (15cm) center of gravity and a +/-90°tilt range. The 1030Ds supports heavier payloads up to 41 lbs.

OConnor Ultimate 1040 Fluid Head Package. OConnor Ultimate 1040 Fluid HeadThe Ultimate 1040 fluid head brings the same quality build and precision movement found the larger OConnor 2575 and 2065 heads to enable cinematographers easily move from heavier to lighter payload camera setups without compromise.Features of the lightweight yet sturdy fluid head include a stepless, ultra-smooth pan and tilt fluid drag custom designed to provide ultimate control and stability, as well as the OConnor Sinusoidal Counterbalance system that provides true, accurate balance at any point in the tilt range.  Providing perfect balance even for lighter-weight cameras with counterbalancing down to zero, the Ultimate 1040 head is made with high-performance magnesium, and aluminium alloys with stainless steel and genuine carbon fibre finishing, to deliver consistent results on the most demanding sets. For camera operators, making the change to smaller, lighter cameras while retaining quality has never been easier. And most importantly, the famous OConnor feel, remains the same regardless of...Features Greater head capacity than 1030 with 0-45lbs (20kg) payload Same OConnor ‘feel the difference’ drag feel as bigger heads with continuous adjustment (not stepped!) Same accessory options as larger OConnor heads OConnor sinusoidal balance mech with widest balance range (down to zero) with near zero balance error Flowtech®®100 2-stage 100 mm lightweight carbon fibre tripod with unique quick release brakes for instant and easy deployment Large Euro ‘Touch and go’ plate 12" Pan Handle with 30° Bend 11.5" Pan Handle Extension +/- 90° Tilt Range Smooth, Stepless & widest range Pan & Tilt Drag Counterbalance Sinusoidal Full 180° tilt range from zero to max payload 100mm Ball Base Optionally Interchangeable to 150mm, Mitchell,  4 bolt, 3 bolt or quickfix. Specification 1040 Fluid Head    100mm Ball Payload    0-20kg/ 0-45 lb at 127mm/ 5inches Included in box 1x Ultimate 1040 1x Large Euro Quick Release with CameraPlate (1030-268) 1x Pan handlefor 1030 range (1030-246) 1x Pan handle extension (2575-135) 1x 100mm Ball Base (08365) 1x 100mm FT Tiedown (S2052-1100)    

Perfectly suited to the adaptable, a la carte configurations of accessorised digital cinematography. Cameras such as the Alexa in portable configuration or any lightweight digital cinema camera (from Sony, Canon, ARRI, AJA, JVC, Panasonic, Vision Research, RED) in ‘maxed out’ studio configuration. OConnor Ultimate heads have been used on almost every Hollywood movie feature and episodic TV Drama since the early 1990’s and OConnor heads in general have been heavily utilised in the industry since 1949. Continuously adjustable OConnor sinusoidal counterbalance and fluid drag that together give the ultra-smooth characteristic OConnor feel over the largest payload range. FEATURES Cine standard position of controls (including brakes) and front handle mount for intuitive, controlled positioning of camera. Lightweight magnesium housing and carbon fiber cover for best in class performance, power to weight ratio and reliability.

With its famous features the 2575 fluid head has become the standard for film production. The head includes OConnor’s patented sinusoidal counterbalance system for true, accurate balance at any point in the tilt range. Add to this OConnor’s stepless, ultra-smooth pan & tilt fluid drag, and you’ve got ultimate control and stability for film style shooting. FEATURES As the next generation head of the highly successful 2575 series, the 2575D retains a large number of features and functions from the older heads but includes many new features: Platform controls on the operator’s side of the head Platform release lever with a one touch finger actuated safety release catch - allowing for one ,“finger” or hand action to undo the safety catch and open the lever Dual platform scales Platform with 4 handle rosettes Soft hand rest on left hand side PRODUCT SPECIFICATION   Capacity: 4 in. (102mm)                   133 lbs (60.5 kg) 6 in. (152 mm)                  105 lbs (47.7 kg) 8 in. (203 mm)                   87 lbs (39.5 kg) Handle(s)                           30° Bases                                 Mitchell, 150 mm Tilt                                      +90° / -90° Height                                8.4 in. (21.3 cm) Width                                 12.4 in. (31.5 cm) Depth                                 8.6 in. (21.8 cm) Weight                               22.9 lbs (10.4 kg)