Inovativ

The DigiBracket is a bracket lets you attach the DigiPlate Pro and DigiPlate Lite directly to the legs of your tripod. Machined from strong and lightweight 6061 aluminum, the bracket keeps your laptop secured and off the ground when you are out shooting solo. FEATURES Attaches a DigiPlate directly to your tripod legs Strong 6061 aircraft grade aluminum construction Compatible with all DigiPlates Constructed of 6061 T6 Aluminum Anodized Black Made in USA.  

The Lite Kit, is a combination of our Lite DigiSystem products proven to be basic essentials. Keep this simple system mounted to a rolling stand, C-Stand, tripod or packed in a backpack for a very efficient super compact workstation. The Lite Kit includes a DigiPlate Lite, our new universal DigiClamps that are compatible with Apple’s newest MacBook Pro Retina and are adjustable from 0.375in – 1.0in, and DigiBase. Alternatively with DigiBracket (LK-0002).  

With INOVATIV’s Umbrella Clamps you can attach a 1.25″ c-stand to any of the 4 upright post of our carts. This is an extremely secure fit and keeps your c-stand tight to your cart while moving or while set up. This is a great system for those that want a flag attached to their cart for easier viewing of monitors, etc. FEATURES Machined from 6061 T6 aluminum Only compatible with 1.25″ diameter c-stands

The DigiCamera Plate attaches to the bottom of the camera and uses a friction system to keep tether cables from pulling out the dainty connectors that most tether cables are equipped with. The friction system is so effective, you can actually carry the camera around by the tether cable. We have made some minor updates that improve the compatibility of the DigiCamera Plate. The size of the three pass-through cable holes have been increased to 0.5″ L x 0.875″ W and have front entrance points in order to use cables equipped with amplifiers. In addition, there are now 2x 1/4-20 and 2x 3/8-16 threaded holes on the top of the DigiCamera Plate so that third party tripod plates can be connected easily. FEATURES Made from 6061 aircraft grade aluminum Three slot positioning system to fit all DSLR bodies (not compatible with medium or large formate cameras) Optional integrated Arca Swiss style tripod quick release plate Friction system keeps your tether cable in check so you can concentrate on shooting No cumbersome knobs or latches Attaching and removing your tether cable takes just seconds Made in USA  

The Voyager NXT utilizes steel casters outfitted with our new aluminum dovetail conversion plates, mounting to the cart quickly and with a much tighter feel. This means its more stable and rolls smoother and quieter than ever before. The Voyager NXT is manufactured using the same very best lightweight premium materials used on all INOVATIV carts. Constructed of 5052 and 6061 aluminum, composite material and stainless steel hardware, the NXT is built tough. In fact we’ve increased the wall thickness of the up-right stanchion tubes specifically for the NXT to make it stronger. The Voyager NXT is slightly heavier at 86lbs for the 36 and 88 lb for the 42. With the portability and slim profile of the Voyager NXT, you can easily collapse and transport the cart in the back of a compact car, small SUV or simply just save space. The Voyager NXT does not include our height adjustable top shelf system (SLAS System) nor our premium EVO wheel system. However, at any time you can upgrade to our premium EVO wheel system and SLAS shelving system at anytime. The NXT is already outfitted with the aluminum dovetail making the transition to the EVO wheel system incredibly easy.   Voyager 36 NXT: Inner Tray Size: 35”W x 23.25”L Collapsed: 39.9”W x 24.7”L x 39.5”H Assembled: 39.9”W x 24.7”L x 41.625”H Standard Equipment: Top & Bottom Shelf 1 Set Quick Grips 2 Accessory Crossbars 10″ removable dovetail wheel system with INOVATIV Foot Brakes FEATURES Small Size Payload Capacity: 600 lb. (dependent on cart size selected) Fully Collapsible, Fully Adjustable & Tool-Free Design. Collapses down to 8.25″ thick with wheels inside. Breaks down into a flight-ready travel case with travel handle and built-in transport wheels and built-in transport wheels. Average Assembly/Disassembly Time: 2 Minutes Built Rigid & Stable – Constructed of premium 5052 and 6061 aluminum, 40% Glass Filled Nylon Corners & Hinge Brackets, and stainless steel hardware. Pneumatic Tires (Air-Filled) & 100% Sealed Bearing Wheels (Extremely quiet and easy to roll). Type II Anodizing on all uprights and machined parts. Inovativ’s Premium Foot Brake System (Stronger Braking Power, More Ergonomic for applying the brakes than standard foot brakes). Adjustable Handles for lifting leverage up curbs, stairs and other inclines.      

1.75″ Aluminum Mast can be used in combination with our other accessories to form a camera mount system or tripod system. Dimensions: 34″L x 1.75″ Diameter Product Weight: 2 lb

Machined from 6061 T6 aluminum, the 100mm ball mount is great for any user. FEATURES Machined from 6061 T6 aluminum Anodized INOVATIV orange Includes all additional mounting hardware Dimensions: 7″L x 7″W x 1.5″H Product Weight: 2.2 lbs  

  Machined from T6 aircraft aluminum, the Inovativ Mitchell plate allows you to mount Mitchell-based tripod heads as well as other Mitchell-based items to Inovativ carts.   Dimensions: 7″L x 7″W x 0.5″H Product Weight: 1.8 lb  

The DigiLegs transform the DigiPlate Pro and Lite into a working table. This is especially handy when you have items like the DigiBase and hard drives mounted to the bottom of the DigiPlate. Those items make the bottom uneven when not mounted on a stand or a tripod. The legs elevate the plate, clearing space for items attached below. The bottom of the legs have rubber pads to prevent scratches on delicate surfaces. FEATURES Evens out the DigiPlate bottom surface once you have accessories and components attached Great if you need to set the DigiPlate on a wet or nasty surface Compatible with all DigiPlates Constructed of 6061 T6 aluminum Anodized Black Made in USA  

Sometimes you might need the computing power or the screen real estate of an iMac while shooting. The DigiBar secures your iMac or Cinema Display to the DigiPlatePro. Combine that with a DigiBase and you can mount it all on a rolling stand which is very handy on set. FEATURES Works with all generations of aluminum iMacs and Cinema Displays Custom pads ensure a strong grip and protect the surface of your iMac or Cinema Display from scratches Not compatible with the DigiPlate Lite Constructed of 6061 T6 aluminum Anodized Black Made in USA  

Add a 5/8 baby pin to any existing 1.75″ Aluminum Mast found in our camera mount or tripod systems with our 5/8 Baby Mast Adapter. This simple upgrade positions a height adjustable 5/8 baby pin on the top of the 1.75″ Aluminum Mast. FEATURES Formed from 6061 T6 aluminum Up to 19″ of adjustable height. Only compatible with a 1.75″ mast Black anodized Dimensions: 20″L x 2.5″W x 2.5″H Product Weight: 4 lb  

The DigiClamps – LaCie Rugged accessory clamps keep your LaCie Rugged hard drives secured to the DigiPlate. The cheese plate design allows the clamps to be positioned in many different configurations. Each clamp is secured to the DigiPlate using large thumb screws making clamping both easy on the fingers and very secure. Clamps come in two sizes to accommodate the LaCie Rugged RAID (501-817) or alternatively LaCie Rugged Standard (501-815) external hard drives.FEATURESOpen design allows your drives to remain cool and avoid heat build upCustom clamps designed to be used with LaCie Rugged model external hard drivesCustom stainless steel hardware makes securing the clamps effortlessCompatible with all DigiPlatesClamps come in pairsConstructed of 5052 aluminumAnodized BlackMade in USA 

The DigiShade Pro is a fully built “Tent Like” shade that easily connects to the DigiPlate Pro. It is fully collapsible for easy storage and assembles quickly. One of the biggest challenges of tethered photography is battling the sun and other light sources. The DigiShade Pro features an ultra lightweight aluminum frame that attaches right to the DigiPlate Pro.   The shade contains 4 internal pockets for equipment storage, i.e. hard drives and card readers. The water repellent Cordura shade features a pop out rear back to allow for tilting your laptop display and also a removable front viewing panel for those ultra sunny locations like the beach and snow. FEATURES Strong and lightweight aluminum frame Frame is removable and collapses for transport Shade is constructed of water repellent 400 Denier Corder fabric DigiShade Pro comes with an optional front door for ultra darkness, and attaches securley to the DigiPlate Pro in seconds Made in USA  

The Stand Holder is designed to work with American Grip stands that have a Hanger Pin installed. However, this product works with most stand manufacturers that use Hanger Pins. FEATURES Fabricated 5052 aluminum Ra/Echo model is black powder coated Scout model is black anodized Dimensions: 3.75″L x 3.50″W x 1.25″H Product Weight: 0.25 lb Carts: Apollo, Echo, Ranger, Voyager  

With the Dual QR Bracket, you can connect two QR Systems (two monitors) to a single stand.  It has a baby pin receiver in the bottom, with a 3/8-16 threaded hole on top to add a baby pin to it (for mounting receivers). The bracket’s face plates (where the QR’s connect) are tapered by 3 degrees. When monitors are connected and on a stand, at standing height the monitors will tilt down just slightly so that they are in line with your eye sight, ideal for social distancing. Locking thumb screws secure monitors in place.   FEATURES Weight: 680g Dimensions: 23x 17,7x 20,3 cm Material: 6061 T6 Aluminum, Stainless Steel Hardware, Black Anodized with INOVATIV's Triple Anodize 8625 Mil-Spec Process IN THE BOX: (2 Qty.) QR Receiver's (2 Qty.) Monitor Plates (2 Qty.) Adapter Plates (1 Qty.) Dual QR Bracket (1Qty.) 5/8 inch threaded Baby Pin (8 Qty.) M4x0.7 x 10mm long screws (16 Qty.) M4x0.7 x 12mm long screws (16 Qty.) M4x0.7 x 16mm long screws (1 Qty.) 3mm Allen Key

The DigiClamps for the Apple MacBook Air are specific to this model computer. Due to the tilted surface of the MacBook Air, our Universal Laptop clamps are not compatible. However, the DigiClamps for MacBook Air fit perfect and give you the added security and trust knowing your computer is secured to the DigiPlate.FEATURESCustom clamps with specially formulated pads will not let go of your laptopCustom stainless steel hardware makes securing the clamps effortlessCompatible with all DigiPlatesClamps come in pairsConstructed of 5052 aluminumAnodized BlackMade in USA 

The DigiPlate Pro is the foundation of all DigiSystem products. It is based on the tried and true “cheese plate” design used by professional photographers and cinematographers. With 161 holes tapped with the very common 3/8-16 thread size, the DigiPlate Pro is virtually limitless when it comes to expandability. All accessories are sold seperatley or by the kit. The DigiPlate Pro comes with one 3/8-16 to 1/4-20 step-down bushing to work seamlessly with tripod’s or tripod plate’s that use a 1/4-20 sized bolt. FEATURES Constructed of 6061 T6 aluminum 17.50 x 11.125 x 0.250 inches, and weighs approximately 4 lbs 161 tapped holes with industry standard 3/8-16 thread size Multiple mounting solutions available Can be mounted directly to tripod legs using the optional DigiBracket Can be mounted directly to an Arca Swiss type tripod head using the Easy Release Plate Works with many other off-the-shelf products including lightstands, clamps, and tripods Made in USA  

This is a 5/8 Baby Pin System that clamps to any of the carts 4 upright post using our new Overtube Style design. With two 3/4″ holes, you can run with up to two baby pins rods with full height and swing adjustability. Rods come in 33″ length and are black anodized. FEATURES Machined from 6061 T6 aluminum Rod Machined 6061 T6 aluminum Anodized black Dimensions: Rod: 30″L x 0.75″W x 0.75″H Clamps: 8″L x 2″W x 1″H (Each Clamp) Product Weight: 5 lb  

The DigiHanger (Inovativ DigiSystem) can perform multiple tasks. First, it becomes a great anchor point to add to the bottom of your DigiPlate as a means to hang cables, accessories, etc. Second, it also has the same design characteristics as the cable management system that is built-in the DigiPlate Pro. Since the DigiPlate Lite does not have a cable management system, the DigiHanger can be added to the bottom of the plate to be used for cable management to prevent tether cables from being pulled out of ports. FEATURES Adds an anchor point to your DigiPlate to hang, tie, or lock items Can be used for cable management to prevent cables from being accidentally pulled from ports Works with all DigiPlate’s Constructed of 6061 T6 aluminum Anodized Orange Made in USA  

With the need for multiple monitors on set and having multiple options for setting them up, we saw an opportunity for creating a universal product that allows easy, secure and quick setup and breakdown of your monitors. Whether you are mounting a monitor on your desk in the home office, setting up a mobile workstation on a production cart, or setting up a video village, with the INOVATIV QR System, your monitor is mounted, locked and secure in just a few seconds. Why the INOVATIV QR System? There are many VESA mounts available on the market. However, a VESA mount requires screwing the mount directly to the monitor making quick attachment and release difficult.  The INOVATIV QR System consists of three plates, one attaches to the monitor, the second attaches to the VESA mount, and the third is a spacer plate which may be necessary for certain monitors which have a recessed mounting area.   Technical Specifications The plates connect to each other using the vDrop system, a patent pending quick-release dovetail mount developed by INOVATIV. What’s the difference between each configuration? The QR System includes (1) QR Receiver, (1) Monitor Plate, (1) Adapter Plate, and mounting hardware.The QR System PRO includes an additional QR Receiver.The QR System + CONVI Clamp contains (1) QR System and (1) CONVI Clamp.The QR System + Pro Monitor Mount contains (1) QR System and (1) Pro Monitor Mount. All configurations include all necessary mounting hardware.   FEATURES Weight: 680g Dimensions: 15x 20x 5cm Options: QR System #501-610QR System Pro #501-611QR System + Convi ClampQR System + Pro Monitor Mount Material: 6061 T6 Aluminum, Stainless Steel Hardware, Black Anodized with INOVATIV's Triple Anodize 8625 Mil-Spec Process

  An accessory kit that transforms your Mac Desktop into a safe, secure server rack mounted system to take with you on set. BRING YOUR TOWER TO WORK   The Tower Rack System transforms your desktop Mac Pro Tower into a server rack mounted solution. Designed for universal use, this computer mounting accessory can be used with nearly any server rack mounted workstation, with all adjustments fully reversible. Have the freedom to choose a Tower or a Rack Mount from one computer!    FEATURES Steel construction to maximize strength and stability. Slide Racks extend from 17.3" to 24.3" in depth Only 5u of rack space needed Custom Buttom Lever allows powering on from the front to your workstation Reversible modification - Change from Desktop to Rack Mount and back.  

The Voyager EVO with X-Top utilities INOVATIV’s patented SLAS (Self-Locking Adjustable Shelving) system. The SLAS system is the backbone of all INOVATIV carts and enables the user to assemble and collapse the cart effortlessly with its tool-free design. This system also incorporates INOVATIV’s locking top shelf that is height adjustable up to 10″ in 2″ incremental stages. To ensure the Voyager EVO rolls with ease, its equipped with INOVATIV’s premium quick-release dovetail wheel system. Each wheel is easily attached or removed and is comprised of an all aluminum lightweight structure, high strength 100% sealed bearings, and 6″, 8″, or 10″  pneumatic tires. The Voyager EVO is equipped with 2 swivel or “smart” casters mounted with INOVATIV manual foot brakes and 2 fixed casters that can transform to a swivel configuration with the removal of a bolt. Voyager 30 EVO: Inner Tray Size: 29” x 19” Collapsed: 34”W x 21”L x 8.25”H Assembled: 34”W x 21”L x 39.5”H Standard Equipment: 3″ Tall Top Shelf (Voyager 30, 36, 42)  4″ Tall Bottom Shelf 1 Set Quick Grips 2 Accessory Crossbars Foot Brake System 8″ removable sealed bearing aluminum dovetail wheel system (Voyager 30) FEATURES Made in the USA Spring Loaded Latches Completely tool free design Collapses down to slim 8.25″ thick flight ready travel case 20% lighter than other carts currently serving the marketplace Upright posts lock in place and will not loosen over time 10″ of top shelf height adjustment in 2″ increments 100% sealed bearing wheels that are extremely quiet and easy to roll Equipped with INOVATIV’s Foot Brake System Constructed of premium 5052 and 6061 aluminum, 40% Glass Filled Nylon Corners & Hinge Brackets, and stainless steel hardware. Type II and III anodizing on all uprights and machined parts Durable texture black powder coat on top and bottom shelves 5 year limited warranty NEW Spring-loaded latch system for securing your collapsed cart. Optionally, you may add your own padlocks for security NEW Treaded Rail Plates integrated within top shelf. Supports 1/4-20 and 3/8-16 accessory attachments NEW Rubberized release collars on cart posts for easier grip during assembly / disassembly NEW Rivet-free and weld-less construction NEW Thicker transport handle for comfort NEW Side handle cutouts for easier loading/unloading collapsed cart NEW Travel case accessory (coming soon)    

RoboCup Patented Portable Clamp-On Caddy Dual Cup Holder is a patented portable caddy holder that securely holds two drinks, cups, phone, tools, and more. It’s perfect for our INOVATIV carts. With no tools required, RoboCup clamps instantly to both round and flat surfaces up to nearly 2″ in size. To open (1) hold the RoboCup with the jaws facing away from you and (2) using both hands squeeze the cups inwards using your chest muscles and (3) clamp onto a surface using both jaws equally. The dual rubberized jaws are designed to be leveraged apart from each other and for maximum security can be locked using a 4″ plastic cable-tie. The bottom caps are removable for access to clean the RoboCup and for long objects including flashlights and tools. Backed by a 3 year limited warranty. FEATURES Instantly clamps to vertical surfaces up to 2in in diameter Includes two hook & loop straps that can be positioned in various configurations Springs and hardware are stainless steel for rust prevention Robust design with a poly-resign material with UV-inhibitors added for durability Three Year warranty Available in Black and Gray  

Machined from 6061 T6 aluminum, the 150mm ball mount is great for any user. FEATURES Machined from 6061 T6 aluminum Anodized INOVATIV orange Includes all additional mounting hardware Dimensions: 7″L x 7″W x 1.5″H Product Weight: 2.5 lbs