Bright Tangerine

Extension piece to adapt the 100, 104, 110, & 114mm Frame Safe Clamp Adapters to the 15mm LWS Support BracketEach Frame Safe Clamp Adapter is configurable for fixed rod support. Depending on the clamp adapter size, you may require a support extension that attaches the clamp adapter to the 15mm LWS support bracket.This support extension is designed for the 100, 104, 110 & 114mm Frame Safe Clamp Adapters and attaches using two screws.The support extensions are height adjustable and set on a guided track. Raising and lowering the extension sets the height position of the matte box and is secured using the set screw.The 15mm LWS Support Bracket attaches to the bottom of the extensions using the two captive screws on the support bracket.It is built from precision cut and anodised from aluminium.FEATURES Compatible with 100, 104, 110 & 114mm Frame Safe Clamp Adapters     Built from hard anodised aluminium     Works with B1235.1002 - 15mm LWS Support Bracket     Compatible with ARRI 15mm Lightweight Support Console     Includes:15mm LWS Support Extension (100 - 114mm clamps)

The 4x5.65" Filter Tray provides a frame to enable you to mount a filter into the Misfit Kick.This filter tray enables you to mount a 4x5.65"" or 4x4"" filter into the frame for use with the Misfit Kick matte box.It features a spring-loaded locking mechanism to securely hold the filter in place. This locking mechanism can be swapped out with the Gripper Module, providing better handling and faster filter changes, particularly when using the matte box in rough environments.It is precision cut from hard-anodized aluminium. The filter tray is also compatible with the ARRI LMB-5, LMB-15, LMB-25 & LMB 4x5.FEATURES Compatible with ARRI LMB 4x5, LMB-25, LMB-15 & LMB-5     Gripper Module compatible     Spring-loaded locking mechanism Includes:4x5.65" Filter Tray

Easily swap out filters by squeezing the trigger when out in the field with the Misfit Kick.This Gripper Tray enables you to mount a 4x5.65"" or 4x4"" filter into the frame for use with the Misfit Kick matte box.The Gripper Tray differs from standard spring-loaded locking mechanism with a squeeze trigger that is much easier to operate, providing better handling and faster filter changes.When using the matte box out in the field, you can still change filters while wearing gloves in rough environments. It is precision cut from hard-anodized aluminium.The filter tray is also compatible with the ARRI LMB-5, LMB-15, LMB-25 & LMB 4x5."FEATURES Easy squeezing action to load and release. Filters     Workable while wearing gloves in outdoor situations     Mounts 4x5.65" or 4x4" filters for the Misfit Kick     Compatible with ARRI LMB 4x5, LMB-25, LMB-15 & LMB-5 Includes:4x5.65" Gripper Tray

Set up the Misfit Kick for 15mm LWS rod support.Add fixed 15mm rod support to the Misfit Kick when using rubber donuts, non-locking lens mounts for extra rigidity.The 15mm LWS Support Bracket attaches to any Frame Safe Clamp Adapter, using two captive screws. The bracket has a single lever to lock the rod clamp on both sides, removing the need for a second lever. The 15mm LWS Support Bracket is also compatible with the ARRI LMB range when using the K2.0014168 Clamp Adapter 143mm"FEATURES Compatible with all Frame Safe Clamp Adapters & ARRI LMB 4x5 143 mm clamp adapter LMB 4x5 Tilt and Flex AdapterK9H9:AH9H9:AP9F9H9:I9F9H9:I9H9:L9 Includes:15mm LWS Support Bracket (Misfit Kick)

The Misfit Kick has interchangeable clamp adapters to match the front outer diameter of lenses from 80mm to 143mm in diameter. This clamp adapter lets you clip on the Misfit Kick directly onto lenses with an 110mm outer diameter like the Cooke 5/i, 7/i, Anamorphic/i, S4/i, Panchro/i Classic (Modern S2/3), Cooke Mini S4/i 18mm, Hawk Anamorphic C-Series, RED Pro Primes & more.It features our new Frame Safe design that not only has the standard circular cut out but an additional rectangular aperture to maximise the field of view to prevent vignetting, even when using wide lenses with large format sensors without having to use a 6x6"" matte box.Each clamp adapter provides proper clamping force to securely mount to the lens.The Frame Safe Clamp Adapters are also compatible with the ARRI LMB 4x5, LMB-25, LMB15 & LMB-5.To add rod support for the Misfit Kick using the 110mm Clamp Adapter, you will require the B1235.1021 15mm LWS Support Extension (100 - 114mm clamps) together with the B1235.1002 15mm LWS support bracket.FEATURES Interchangeable Frame Safe Clamp Adapters     Compatible with ARRI LMB 4x5, LMB-25, LMB-15 & LMB-5     Suits lenses with 110mm outer diameter     Compatible with 15mm LWS support bracket     Includes:Frame Safe Clamp Adapter (110mm)

Misfit Kick is the next generation matte box for all cinematographers. This kit comes ready with three 4x5.65" filter trays and carbon fibre top flag. The Misfit Kick is a versatile matte box for all types of filmmaking. Configurable to clip on, rod mount or swing away.This kit includes the Misfit Kick core, two 4x5.65"" filter trays and the carbon fibre top flag. To complete the system, simply add a Frame Safe clamp adapter to suit your lens and you have a complete matte box ranging from 80mm to 143mm.The clamp adapters use the new Frame Safe design for an extra wide field of view, even when using large format sensors with wide lenses.The Misfit Kick features an all-new patented reveal stage design, making it more robust and easier to operate in the field, converting from a 2-stage to 3-stage matte box without any extra hardware or tools, just a third filter tray.Rather than use ball bearings like traditional matte boxes, the Misfit Kick uses a new spring system in combination with a protruding ridge to secure the filter trays, creating a positive locking position with tactile feedback for increased confidence when loading filters. For even more security, a filter guard can be mounted onto the bottom of the sunshade. When working in fast paced environments like on a tracking vehicle, drone or jib, a safety loop provides a secure tethering point for a safety wire or lanyard. For additional light protection, add the optional top flag, side flag or hard mattes for precise control over flares and image contrast.Knurled, captive locking screws are used to secure filters in place, preventing screws from going missing while in the field. The sunshade is built from high-grade carbon fibre and the reveal system from CNC cut hard anodised aluminium for extra strength while staying lightweight.FEATURES Patented Reveal Stage for tool-less conversion to 3-stage     Works with Frame Safe Clamp Adapters for Misfit Kick and compatible with ARRI clamp adapters     Configurable to clip on, rod mount or swing away on 15mm LWS or 15/19mm Studio supports     Compatible with ARRI filter trays     Includes:B1235.1001 - Misfit Core3x B1251.1042 - 4x5.65"" Filter Tray (Misfit Kick)B1210.1025 - Carbon Fibre Top Flag (Misfit Kick)

Prevent light entering your lens causing flares. With extendable wings, providing complete protection from stray light. The flag can be mounted to the top or bottom of the matte box.This Carbon Fibre Flag mounts to the top or bottom of the matte box, giving you fine control over the light entering your frame. Adding the flag is done in seconds, using the quick release mount, which also secures the flag at the desired angle and packs flat for transport, protecting the lens.With extendable wings, you can protect your image to maintain proper contrast or let light in to add creative flares.The flag is made from carbon fibre to reduce weight, and is coated for maximum durability. The  flag is also compatible as a bottom flag to protect from lens flares when shooting in snow or sandy conditions.FEATURES Strong & lightweight carbon fibre construction     Expandable wings for extra protection     Closes flat against matte box     Compatible with the Misfit Kick, VIV, VIV 5" & Misfit Includes:Carbon Fibre Top/Bottom Flag

The Misfit Atom Pola+ matte box is an ultra lightweight matte box that can accommodate up to two 4×4″ or 4×5.65″ filters and a single 138mm round filter like a circular polariser. A third filter stage, supporting a single 138mm round filter can also be added using the Misfit Atom Pola+ Rota Ring. This kit comes ready for 15mm LWS rod mounting. FEATURES Ultra-lightweight at only 270 grams (~10 oz) Mount up to two 4×4″ or two 4×5.65″ & a single 138mm Circular filter Removeable rubber sunshade Supports +1 & +2 diopters Round filter can rotate up to 120-degrees (Circular Polariser only requires 90-degrees) 143mm Diameter Clamp Configurable to rod mount 15mm LWS rod mount Adaptable to 15mm/19mm Studio rods  

15mm & 19mm support rods are the chassis to any camera rig. You can mount matte boxes, support large lenses, follow focus & motors and other support equipment. Whichever way you set up, the Drumstix’ titanium resilience will support your needs without restrictions. Welcome, to the the new standard of operation. Compared to carbon, aluminium and steel bars, the Drumstix’ offer a superior strength to weight ratio. Now, there is no need to compromise your shot for the sake of saving weight or limitations of the gear.
Bright Tangerines technology won’t shatter like carbon, nor will it lose its structural integrity. It won’t crush like aluminium when being clamped. And if you hadn’t guessed, Drumstix are built to last a lifetime. Their innovators, designers, and manufacturers in Farnham make every set of Drumstix with two microns of tolerance which will stay straight on even the longest 18” rod. Experience the smoothness of British manufacturing with no bumps,dents and ever-so-slight mismatch which make Drumstix, the quintessential support rod. FEATURES• Quarter of the weight of stainless steel rods
 • Won’t bend like aluminium or shatter like carbon fibre rods
 • Manufactured to high British standards with two microns of tolerance
 • Available in 15mm or 19mm in a range of lengths    15mm SUPPORT RODS Size Dimensions Drumstix Weight Ø 15mm – 3’’ 76.2 mm x 15 mm x 15 mm 15g Ø 15mm – 6’’ 152.4 mm x 15 mm x 15 mm 30g Ø 15mm – 9’’ 228.6 mm x 15 mm x 15 mm 45g Ø 15mm – 12’’ 304.8 mm x 15 mm x 15 mm 60g Ø 15mm – 15’’ 381.0 mm x 15 mm x 15 mm 75g Ø 15mm – 18’’ 457.2 mm x 15 mm x 15 mm 90g  

15mm & 19mm support rods are the chassis to any camera rig. You can mount matte boxes, support large lenses, follow focus & motors and other support equipment. Whichever way you set up, the Drumstix’ titanium resilience will support your needs without restrictions. Welcome, to the the new standard of operation. Compared to carbon, aluminium and steel bars, the Drumstix’ offer a superior strength to weight ratio. Now, there is no need to compromise your shot for the sake of saving weight or limitations of the gear.
Bright Tangerines technology won’t shatter like carbon, nor will it lose its structural integrity. It won’t crush like aluminium when being clamped. And if you hadn’t guessed, Drumstix are built to last a lifetime. Their innovators, designers, and manufacturers in Farnham make every set of Drumstix with two microns of tolerance which will stay straight on even the longest 18” rod. Experience the smoothness of British manufacturing with no bumps,dents and ever-so-slight mismatch which make Drumstix, the quintessential support rod. FEATURES• Quarter of the weight of stainless steel rods 
• Won’t bend like aluminium or shatter like carbon fibre rods 
• Manufactured to high British standards with two microns of tolerance
 • Available in 15mm or 19mm in a range of lengths   19 mm SUPPORT RODS Size Dimensions Drumstix Weight Ø 19mm – 9’’ 228.6 mm x 19 mm x19 mm 58g Ø 19mm – 12’’ 304.8 mm x 19 mm x19 78g Ø 19mm – 15’’ 381 mm x 19 mm x19 97g Ø 19mm – 18’’ 457.2 mm x 19 mm x19 116g  

The Revolvr Atom Cine Kit comprises of the Revolvr Atom 15mm core bridge which lets you set up your follow focus system on 15mm lightweight rods. The core bridge allows you to set up on 15mm and 19mm studio rods as well with our additional accessories. This kit comes with the Revolvr Handwheel which is an ergonomically designed conical handwheels with anti-slip grip which lets you accurately pull focus in challenging conditions and also comes with a provision for you to mount our torch holster if required. The Revolvr Swing Arm Cine (1:1.842) along with our 0.8 – 35 tooth and 0.8 – 43 tooth gears is also a part of this kit and this allows you to set up on either side of the core bridge for complete flexibility in your set up and the industry standard gears effortlessly connect to the lens ring. We have included 2 of our Revolvr Atom Marking Disc Mini which are compatible with industry standard handwheels which allow you to make markings of your focus points and it is easy to wipe off as well. The Revolvr atom mini kit comprises of the most essential focus pulling tools which have been carefully crafted and assembled in Germany with uncompromised quality. This kit is built from anodized aluminium, stainless steel, rubber and high grade Delrin for maximum durability and resistance to wear and tear.   FEATURES 15mm Revolvr Atom core bridge Ergonomically designed conical handwheel with anti-slip grip Revolvr Swing Arm Cine (1:1.842) which can be mounted on either side of the core bridge Industry standard 0.8-35 tooth and 0.8 - 43 tooth gears which connect to the lens ring Two Revolvr atom marking disc mini, which are compatible with industry standard handwheels      

The Bright Tangerine Alexa Mini Master System is a low profile power distribution solution, designed to greatly expand your power connection options for video accessories – such as monitors, lens motors, and wireless receivers/transmitters – whilst simultaneously powering your ARRI Alexa Mini camera. The rig is powered by using an on-board V-Mount battery, or by using the DC input option. This system compliments owner/operator setups, providing them with a complete and functional package. It also caters to rental houses wanting to offer a broad power solution when renting out the ARRI Alexa Mini camera. The Power Module mounts onto the camera body via the Left Side Cheese Plate, which in turn is mounted on to the ARRI MAP-1 or MAP-2 plates. Given that it does not require an additional rail support, this system does not add any unnecessary bulk or weight to your camera setup, and its small form factor allows the package to be used in any shooting scenario. The Alexa Mini Master System weighs in at a mere 900 grams, making it a viable option for lightweight setups. This cage system also helps in counterbalancing, by shifting the centre of gravity away from the lens, adjusting for front heavy setups. The Power Distribution Module powers the camera using a single cable, which connects to the BAT input port on the rear of the Alexa Mini. Access to the Time Code port, and CFast media slot remains unobstructed, meaning that your media can be removed without unmounting the power module. Users wanting to take advantage of the camera’s Ethernet functions, can do so by using the standard RJ-45 connector. A lever provides easy access to the power button. To maintain airflow, and proper operating temperature, a quiet internal fan automatically adjusts its speed, based on its built-in temperature sensor. An optional Run/Stop trigger cable (B4001.1010) is available for use with compatible devices. The Power Distribution Module provides the following ports:   Output Options: (x2) D-Tap (Unregulated Output); (x1) Twist D-Tap (Unregulated Output); (x3) 12V Lemo 2-Pin (Unregulated Output, ARRI Standard Pinning); (x1) 5V USB-A Output – For powering HDMI Transmitters or Mobile Devices; (x1) 24V Fischer 3-Pin (Regulated) – RS Compatible, with Run/Stop Functionality; (x1) Standard Ethernet RJ-45 – The ethernet port on the camera is covered by the power module and converted to a standard RJ-45 connector.   Input Options: (x1) V-Mount Battery; (x1) 24V Lemo 8-pin (DC Input).  

The Misfit Kit 1 comprises of an ultra-light weight two stage 4×5.65 clamp-on matte box, designed to be compact and easily manoeuvrable and it can be expanded to a rod mount or swing away configuration with optional accessories. The Misfit matte box features a patented ‘reveal’ cassette system, which allows you to switch between 2 and 3 stage configuration with no extra parts or tools and all you need is a third tray. Misfit Kit 1 comes with flag mounts and a top flag with variable blades that allow complete freedom in light control and they can be easily twisted and folded to allow you to manoeuvre in tight spaces and allow for efficient storage. The top flag is also compatible as a bottom flag to protect from lens flares when shooting in snow or sandy conditions. The Misfit Kit 1 also comes with a 114mm clamp lens attachment and two 4 x 5.65 horizontal trays to make sure you are ready for instant action. Misfit offers class leading field of view covering up to a 14mm Cooke with 3 PV stages and also works with RED Pro Zooms at 5K and with sensor sizes getting bigger, it’s built to serve you well in to the future. The Misfit Kit 1 is built from high grade carbon fibre, precision cut and hard anodized aluminium, stainless steel and industrial grade plastic   FEATURES Ultra-light weight 4 x 5.65 clamp on matte box which can be expanded to a rod mount or swing away with optional accessories Patented “Reveal” cassette system to switch from 2 stage to 3 stage configuration with no extra parts or tools Top flag compatible as bottom flag for lens flare protection Class leading field of view Inclusive of a 114mm clamp lens attachment for instant action Built from high grade carbon fibre, precision cut and hard anodized aluminium, stainless steel and industrial grade plastic  

The Morrissey – 15mm LWS Lens Support System is an optional accessory that securely supports your lenses to reduce the load on the lens mount. This kit comes complete with a 1/4″ and 3/8" support post.  The 15mm LWS Lens Support also allows for 18mm of vertical travel to give you more flexibility in your setup. Your 15mm LWS Lens Support System is built from hard anodised aluminium, stainless and hardened steel to ensure maximum durability. The clamping system allows the use of a single quick release lever to effortlessly lock it in place, even in cramped spaces while being easy to operate with gloves. The 15mm LWS Lens Support also features two 3/8” mounting points along with anti-twist ports.   FEATURES Enables you to support your lenses on 15mm LWS rods  3/8” or 1/4" threaded bolt provisions with lateral adjustment for multiple options  Built from precision cut hard anodized aluminium, stainless and hardened steel for maximum durability  Quick release lever for easy operation with gloves and in tight spaces  18 mm vertical on the posts  

FEATURES The core bridge has a small footprint of 18mm to give you more flexibility on the rods and compatible with the Revolvr 15mm and 19mm studio bridges to give you more mounting options. Both modes provide for a quick release feature with a built-in safety mechanism. The core bridge is compatible with the Revolvr and Revolvr Atom handwheels which can be mounted on either side along with a 3″ handwheel extension when required. It can also be operated by the extension whip and speed crank which can be connected through the handwheels or directly into the core bridge in tighter spaces.