Bright Tangerine

Elevate your filmmaking experience with the Sony BURANO using the LeftField System. Designed for versatility across diverse applications, catering to any filmmaking situation or setup. Choose from a range of kits or build your own with a wide range of accessories to enhance your Sony BURANO. The perfect Sony BURANO camera setup The Sony BURANO's compact design, combined with its 8.6K stabilised sensor, makes it suitable for a wide range of scenarios. Whether you're a solo operator using a shoulder rig or working with a full crew on set, the BURANO adapts seamlessly. We recognise that every filmmaker has distinct requirements, so we've crafted a system that's as adaptable as the camera itself. There's no "one size fits all" solution, which is why our design caters to the individual needs of each filmmaker with a wide range of camera accessories, you can tailor the setup to perfectly match your cinematic style. Adaptability at its core The system's foundation is the camera cage, consisting of the BUD compatible bottom plate, sliding top plate, and NATO side plates. Enhance shooting capabilities with the new KASBAH Shoulder Rig (VCT-14) for handheld, documentary-style filming or the LeftField 3 BUD baseplate for studio work. Easily transport gear with the new D-Style Master Handle. We have redesigned the monitor mount with 19mm rods, support brackets, and a straight loupe adapter to help you perform at your best.

Elevate your filmmaking experience with the Sony BURANO using the LeftField System. Designed for versatility across diverse applications, catering to any filmmaking situation or setup. Choose from a range of kits or build your own with a wide range of accessories to enhance your Sony BURANO. The perfect Sony BURANO camera setup The Sony BURANO's compact design, combined with its 8.6K stabilised sensor, makes it suitable for a wide range of scenarios. Whether you're a solo operator using a shoulder rig or working with a full crew on set, the BURANO adapts seamlessly. We recognise that every filmmaker has distinct requirements, so we've crafted a system that's as adaptable as the camera itself. There's no "one size fits all" solution, which is why our design caters to the individual needs of each filmmaker with a wide range of camera accessories, you can tailor the setup to perfectly match your cinematic style. Adaptability at its core The system's foundation is the camera cage, consisting of the BUD compatible bottom plate, sliding top plate, and NATO side plates. Enhance shooting capabilities with the new KASBAH Shoulder Rig (VCT-14) for handheld, documentary-style filming or the LeftField 3 BUD baseplate for studio work. Easily transport gear with the new D-Style Master Handle. We have redesigned the monitor mount with 19mm rods, support brackets, and a straight loupe adapter to help you perform at your best.

Elevate your filmmaking experience with the Sony BURANO using the LeftField System. Designed for versatility across diverse applications, catering to any filmmaking situation or setup. Choose from a range of kits or build your own with a wide range of accessories to enhance your Sony BURANO. The perfect Sony BURANO camera setup The Sony BURANO's compact design, combined with its 8.6K stabilised sensor, makes it suitable for a wide range of scenarios. Whether you're a solo operator using a shoulder rig or working with a full crew on set, the BURANO adapts seamlessly. We recognise that every filmmaker has distinct requirements, so we've crafted a system that's as adaptable as the camera itself. There's no "one size fits all" solution, which is why our design caters to the individual needs of each filmmaker with a wide range of camera accessories, you can tailor the setup to perfectly match your cinematic style. Adaptability at its core The system's foundation is the camera cage, consisting of the BUD compatible bottom plate, sliding top plate, and NATO side plates. Enhance shooting capabilities with the new KASBAH Shoulder Rig (VCT-14) for handheld, documentary-style filming or the LeftField 3 BUD baseplate for studio work. Easily transport gear with the new D-Style Master Handle. We have redesigned the monitor mount with 19mm rods, support brackets, and a straight loupe adapter to help you perform at your best.

Bright Tangerine Mini Axl (Sony FX6) The Mini Axl kit (Sony FX6) contains everything you need to replace the original mount for your Sony FX6 monitor, adding flexible positioning, drag adjustment and sag-free support for the FX9 Loupe. This kit includes the Folding NATO Rail, Monitor Holder, 15mm Rod Mount & the NATO Rotating Bar & cable hook. Adds an articulating NATO rail onto the Sony FX6 Top Handle Flexible monitor positioning with drag adjustment Replaces the original Sony FX6 monitor bracket Supports the weight of the FX9 Loupe and maintains horizon level Monitor can be folded & stowed away for transport This kit comes complete with everything you need to use your Sony FX6 monitor with the Mini Axl. It is designed to be compact while adding flexibility in how you want to position the monitor. The NATO rail can be attached to the front or rear Sony 8T point on the handle.VERSATILE MONITOR MOUNTThe extension rail mounts to the 15mm rod clamp, allowing it to pivot 360-degrees. The arm can then be rotated for extra height or reach, and can be folded flat when not in use. The removable orange threaded cap prevents the rail from falling out, while a removable stud provides a safety stop for attached accessories.ADJUST ON THE FLYYou can adjust the amount of drag on the tilt-axis by using the locking screw, capable of supporting the weight of the FX9 loupe.The monitor holder is custom matched to the FX6 monitor, with a 3/8” thread for attaching to the included 15mm rod mount or other accessories, and the included cable hook prevents snags.When transporting the camera, the monitor can be folded into the stowed position.CABLE HOOK INSTALLATIONTo install the cable hook, you will require a small Philips screwdriver. First, remove the original cover by undoing the screw on the side. Place the cable hook onto the monitor and secure with the longer M2 screw provided.NO COMPROMISESMachined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability.Weight: 0,150 kgDimensions: 14 × 10 × 4 cm  

Bright Tangerine Sony FX6 Portrait Adapter 15mm LWS SpacerSet up your Sony FX6 with the correct spacing for 15mm LWS accessories when filming in vertical orientation.It combines with the Portrait Plate Adaptor and LeftField Sony FX6 Baseplate. Sets camera to correct height for 15mm LWS accessories Combines with LeftField Sony FX6 15mm LWS Baseplate and Sony FX6 Portrait Adapter Plate (B4004.1016) Securely interlocks with riser, eliminating any play or movement Includes captive ¼” & 3/8” mounting screws Set up your Sony FX6 with the correct spacing for 15mm LWS accessories like a matte box, lens supports and more when filming in vertical orientation.15mm LWS SpacingThe spacer interlocks with the Sony FX6 riser, eliminating any play or movement in the plate. The two captive screws are used to secure the Sony FX6 in portrait orientation using the portrait plate adapter.British WorkmanshipMachined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability. The Sony FX6 Portrait Adapter 15mm LWS Spacer comes with our famous Bright Tangerine Support and the addition of a 5 year warranty.Weight: 0,130 kgDimensions: 3,3 × 8,8 × 1,5 cm  

Bright Tangerine Sony FX6 CheeseplateCreate a clean build using a NATO based Cheeseplate on your Sony FX6 to mount your wireless transmitters, audio equipment, cables & more. Multiple 3/8″ & 1/4″ threads for mounting accessories Integrated NATO clamp for fast set up & removal Added cable management with wide slots for bongo ties Plate can be configured in portrait or landscape orientation Lightweight & low profile Keep your camera build clean & simple with the Sony FX6 Cheeseplate. Using the integrated NATO clamp, mount it to the top rail on the top plate to speed up your build time on set.Portrait or Landscape OrientationsThe NATO clamp attaches to the cheeseplate using a 3/8″ Anti-Twist mount. The cheeseplate can be mounted using any of the outer mounting points as required in either landscape or portrait orientation.Easy Accessory MountingWith multiple anti-twist 3/8″ & 1/4″ mounting points, you can attach any type of accessory you like from wireless video transmitters, audio receivers, FIZ controllers & more.The NATO clamp is secured in place using a 4mm Hex key.Extra care comes standardMachined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability. Every Cheeseplate comes with our famous Bright Tangerine Support and the addition of a 5-year warranty.  

Bright Tangerine LeftField 3 Sony FX6 – Expert KitTake your Sony FX6 to the next level with the LeftField 3 Sony FX6 – Expert Kit. It provides everything you need to rig the camera for different configurations, allowing you to move between setups quickly and easily. Whether you’re shooting documentaries, corporate videos, or anything in between, the Sony FX6 Expert Kit will help you get the most out of your camera. Mini Axl for FX6 monitor with drag adjustment & sag-free support Articulating NATO rail adds extra reach & height placement for monitor Rigid top plate with 1/4”, 3/8”, NATO & QD sockets Helicoil reinforced threads to prevent stripping and loosening over time Patented Open•UP baseplate lets you easily lift off the camera from the dovetail Sets the camera to 15mm LWS standards with support for rods & accessories With the Sony FX6 – Expert Kit, you can take your Sony FX6 to new heights with everything needed for any situation.Ready for RiggingRig up accessories to the rigid top plate with options for NATO, 1/4″& 3/8″ mounted accessories. Two Quick Detach (QD) sockets are also ready for attaching a carrying strap or tethers.15mm LWS PlatformThe LeftField 15mm LWS baseplate is perfect for fast transitions on set, using the patented Open•Up system. With two industry-standard 15mm rod mounts to support other camera accessories like a matte box or focus motors.Flexible Monitor MountThe Mini Axl is a versatile bracket that replaces your stock monitor mount on the FX6. The screen can be adjusted on the fly to any angle or locked into place. When you're operating handheld with the Sony FX9 loupe, the Mini Axl will keep it from sagging from the weight. When it's time to change locations, simply stow away the monitor, keeping the screen protected. The included cable hook also helps with cable management and snags.Sony FX6 SystemThe included filler piece adds an additional central NATO rail for handles and gimbal plates, as well a support brace to completely remove all physical stress from the stock handle.Each Expert kit comes with the Top Plate, Filler Piece, Top Handle Brace, Mini Axl (Sony FX6), LeftField 3 15mm LWS Baseplate & a set of 15mm Drumstix (12"/30.4cm)You can expand the kit further with options for lens adaptor supports when using PL lenses, KASBAH Shoulder support & more.LeftField 3Customise your camera build with the extensive selection of accessories in the LeftField system. Letting you create the right setup for each and every task.This kit has been updated to LeftField 3 and is not compatible with LeftField 2 accessories.No CompromisesMachined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability. The Advanced Kit comes with our famous Bright Tangerine Support and the addition of a 5-year warranty.

Bright Tangerine Sony FX6 Portrait Adapter PlateEasily rig up your Sony FX6 for vertical filming with the Portrait Adapter Plate.It also adds an extra layer of convenience as a cheeseplate for mounting accessories like wireless video transmitters and more. Right side cheeseplate for your Sony FX6 for secure mounting in vertical orientation. Connects to the Sony FX6 Top Plate Mk II & handgrip mount Provides ¼”, 3/8”, QD socket & ARRI rosette for accessory mounting with helicoiled threads for dovetails & quick release plates. Compatible with B4004.1019 spacer for proper 15mm LWS height Easily rig up your Sony FX6 for vertical filming with the Portrait Adapter Plate. It also adds an extra layer of convenience with its double function as a cheeseplate for mounting accessories like wireless video transmitters and more.Accessory MountingThe plate provides a number of threaded ¼” & 3/8” holes on the side and top for mounting accessories. It also features an ARRI standard rosette for hand grips.Two helicoil reinforced threads provide a balanced point for mounting dovetails & quick release plates.Gimbal CompatibleWhen working with gimbals, combine it with the LeftField risers and dovetails for the DJI Ronin 2, RS 3 or Freefly Movi for a seamless quick release system, letting you switch between platforms in seconds.InstallationThe Portrait Adapter Plate attaches to the Sony FX6 Top Plate Mk II (B4004.1018) and is secured to the side using the hand grip mount. This creates a robust connection, keeping the camera secure and steady. The plate is also compatible with Sony FX6 Top Plate Mk I (B4004.1005).15mm LWS SpacingTo achieve proper 15mm LWS height spacing when in portrait mode, combine with the 15mm LWS Spacer (B4004.1019).British WorkmanshipMachined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability. The Sony FX6 Portrait Adapter Plate comes with our famous Bright Tangerine Support and the addition of a 2 year warranty.Weight: 0,197 kgDimensions: 13,5 × 8,5 × 4 cm  

Bright Tangerine LeftField 3 KASBAH Shoulder Pad + 15mm LWS/19mm Handle KitDesigned for all day comfort, the KASBAH System provides a versatile support when operating on the shoulder or handheld. Designed for the LeftField 15mm Universal Baseplate and ARRI standard dovetails for fast & secure transitions between tripod & shoulder operating. This kit consists of the shoulder pad, 15mm bracket, riser, 15mm LWS/19mm Studio bridge, two sets of shoulder connectors, hand grip arms and hand grips. Variable density zones using KASBAH for optimal cushioning & pressure relief Open structure for air flow & allows for heat dissipation & evaporation of sweat Hand grip system for 15mm LWS & 19mm Studio configurations Upper flange encourages a relaxed grip and reduces tension 3/8″ Anti-twist & 1/4″ threads on Grip Arm for mounting accessories Milled rosettes offers positive engagement using ARRI standard for maximum compatibility Symmetrical design allows for use on left or right sides Glove-friendly knob for easy adjustments in fast paced settings Precision cut from high-grade aluminium & stainless steel The hand grip supports can be articulated into a wide range of positions to create various handheld looks and is configurable for 15mm LWS & 19mm Studio setups.Next Level Comfort & AirflowThe shoulder pad & hand grip have been created using Digital Light Synthesis (DLS), a process pioneered by Carbon that uses oxygen-permeable optics & programmable liquid resins to form a unique matrix structure with an infinite number of density zones. The open structure allows air to naturally flow through, evaporating sweat to keep the operator cool. Made for long days on set, operators will experience a new level of comfort & freedom to move. Extremely durable & sturdy, capable of being used in any extreme conditions, the pad is easy to clean with water and UV resistant The included mounting bracket allows the pad to connect to the rear of the LeftField 3 15mm LWS baseplate, with the riser providing clearance when using an ARRI standard balance plate.Tripod to Handheld in SecondsThe riser features a guided track to align the baseplate with an end stop that provides tactile feedback to the operator that the baseplate is on the riser. The safety wedge prevents the baseplate from sliding off accidentally. Unlike VCT systems, the KASBAH System works on any ARRI standard dovetail removing any flex or play due to tolerances between the wedge & receiver plates. Going back to handheld operation is as simple as opening up the lever and lifting off the camera. Alternatively, the LeftField 3 baseplate or any other baseplate with an ARRI dovetail clamp can dock on top of the shoulder pad, making it compatible with third party manufacturers.Battery Plates & CounterbalanceAttaching the rear 15mm bracket extends the mounting options even further. Supporting battery plates and other accessories which also serves as counter balance for larger camera builds. The arms feature 3x 3/8″ anti-twist & 5x 1/4″ threaded points which can be used to mount articulating arms for monitors & other accessories.Precision Milled, Not StampedEach rosette has been CNC precision cut from high-grade stainless steel. Compared to stamped rosettes, ours offer higher engagement & maximum compatibility that won’t slip.LeftField 3 SystemCustomise your camera build with the extensive selection of accessories in the LeftField system. Letting you create the right setup for each and every task.This kit has been updated to LeftField 3 and is not compatible with LeftField 2 accessories. Weight: 1,150 kgDimensions: 25 × 10 × 7 cm  

Bright Tangerine Prodigy Hose – 75cm (30″) A custom-made flexible hose for air to flow from the compressor to the Air Head. Purpose-built to handle the high pressure and volume requirements.The hose is 75cm (30”) in length and features secure bayonet fittings on each end. Purpose-built to handle high pressure and large volume of air 75cm (30”) long hose allows for flexible compressor placement Kink resistant and durable to provide high air flow One-piece quick release bayonet fittings for no leaks Hose also available in 50cm (20”) & 100cm (40”) lengths Description Available in 50cm (20”), 75cm (30”) & 100cm (40”) lengths to place the compressor further away from the Air Head. QUICK RELEASE CONNECTORS Attaching the Prodigy Compressor and Air Head is easy using the quick release connectors on each end. The custom designed bayonet fittings ensure a secure fit and are a one-piece construction, removing any chance of air leaks or loss in pressure which could affect the air flow. DESIGNED FOR HIGH PRESSURE The Prodigy Hose is available in a range of lengths, allowing for the compressor to be placed in a range of positions on the camera rig. It is kink resistant so it can be articulated and tied down without affecting the air flow. Additional information Weight 0,090 kgDimensions 75,5 × 4 × 3 cm        

Bright Tangerine Prodigy Hose – 100cm (40″) A custom-made flexible hose for air to flow from the compressor to the Air Head. Purpose-built to handle the high pressure and volume requirements.The hose is 100cm (40”) in length and features secure bayonet fittings on each end. Purpose-built to handle high pressure and large volume of air 100cm (40”) long hose allows for flexible compressor placement Kink resistant and durable to provide high air flow One-piece quick release bayonet fittings for no leaks Hose also available in 50cm (20”) & 75cm (30”) lengths Description Available in 50cm (20”), 75cm (30”) & 100cm (40”) lengths to place the compressor further away from the Air Head. QUICK RELEASE CONNECTORS Attaching the Prodigy Compressor and Air Head is easy using the quick release connectors on each end. The custom designed bayonet fittings ensure a secure fit and are a one-piece construction, removing any chance of air leaks or loss in pressure which could affect the air flow. DESIGNED FOR HIGH PRESSURE The Prodigy Hose is available in a range of lengths, allowing for the compressor to be placed in a range of positions on the camera rig. It is kink resistant so it can be articulated and tied down without affecting the air flow. Additional information Weight: 0,120 kgDimensions: 102,5 × 4 × 3 cm      

Power the Prodigy Air Deflector with this 2-pin Lemo to 3-pin XLR cable.24V RATEDThe 1.5m (4.9ft) cable made from high-quality materials rated for 24V offers minimal voltage drop. They are flexible and reliable for the most demanding conditions.WIRING SPECIFICATIONSThe Prodigy power cable uses the US standard. For both the 2-pin LEMO & XLR connector, Pin 1 is wired for Power (+), and Pin 2 for Ground (-). EXTRA CARE COMES STANDARDHand-built in our single factory in Church Crookham from high-grade materials. The Prodigy Power Cable comes with our famous Bright Tangerine Support and the addition of a 12-month warranty.   Product Highlights Hand-built and tested for a reliable connection for the Prodigy Air Deflector High-quality 2-Pin 2B Lemo & XLR connectors Rated for 24V output with low voltage drop Flexible 1.5m (4.9ft) long cable    

The Prodigy Top Flag is a great way to protect your frame from the elements and maintain contrast by blocking out flares.  No tools are required, so you can install it quickly on the go. The flag provides additional protection for your Prodigy glass, with its 165 degree range of movement. It can close flush  for transport and open up to block out flares and provide coverage from rain.QUICK AND EASYTo install the flag, line up the guide posts and insert the thumbscrew through the mounting point. You can now use the thumbscrew to set the tension. When fully tightened, the flag will be secured in position. Slightly loosen to adjust the flag on the fly. This is great when working in fast paced environments when constantly changing angles.EXTRA CARE COMES STANDARDMachined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability. The Prodigy Top Flag comes with our famous Bright Tangerine Support and the addition of a 2-year warranty.Product Highlights Quick and easy installation, no tools required Adjustable tension - lock it off or adjust it on the fly Lightweight carbon fiber construction for easy transport Closes flat for complete protection for your Prodigy Glass  

Clear lens with the Prodigy Air Deflector The Prodigy Air Deflector is the perfect solution for keeping a clear lens. At Glastonbury Festival, where it was raining, we noticed the camera operators continually wiping water off the lens. Rain deflectors have been employing spinning discs and centrifugal forces for decades and have several disadvantages. The underlying principles haven’t changed in almost 30 years. We knew there had to be a better solution. With a simple push of a button, the patented design can be quickly deployed to provide you with the clear shot you need in any condition. Harnessing the Power of AirBefore it’s compressed and accelerated at 300+ mph, air is filtered to 1 micron and passes through the hose to the Air Head. The air attaches to the specially treated piece of glass, deflecting any water or particles that might otherwise ruin the shot. The pressurised air provides a barrier over the entire frame with no dead zones where water might accumulate. The Prodigy is quieter and produces sound at a lower frequency than traditional rain spinners, resulting in less discomfort for the talent, crew and environment. The downward force imitates gravity and the natural movement of rainfall.No Spinning GlassWith no need for a spinning piece of glass, we eliminate many limitations in traditional designs. The Prodigy has no centrifugal forces at play so there’s no gyroscopic effect for the operators to manage. This makes it a much easier experience for the operator whether it’s panning on a tripod or operating in handheld. The glass in the Prodigy is secured in place dissipating any vibrations, making it stronger and less likely to break from impacts.Optically Clear, Impact Resistant and SuperhydrophobicThe special piece of glass goes through a number of advanced manufacturing processes. The end result is a glass that’s optically clear with no effect on image quality or exposure,and has excellent impact resistance. Any water or liquid on the surface slides off and doesn’t bead up after being treated with a superhydrophobic coating.More Creativity and Fewer RetakeWith an airspeed of over 300 mph, the lens is cleaned almost immediately, with some particles not even coming into contact with the glass, making it ideal for high-speed work. The compressor has three different speeds so you can choose the one that best matches your desired look and feel.Saves Time On SetThe Air Head doesn’t emit any heat, so there’s no fogging on the lens or filters. This also saves time because you don’t have to unbag the camera and lens to clear the lens before shooting.Plastic bagging is easily secured to waterproof the camera and other electronics because of the flat sides.Rental Friendly & Easy MaintenanceCompared to spinners, the Prodigy has far fewer moving parts. With no bearings to physically spin the glass, there is less maintenance to do. Constructed of carbon fiber, high-grade aluminum, and stainless steel, making it extremely durable, rugged, and waterproof. It can endure any harsh conditions in either hot or cold climates. It won’t rust or corrode. When you need to replace your glass, it’s simple and quick to do so. Spare glass is accessible if it gets damaged or breaks. This results in a faster ROI for rental investments and the lower cost makes it more accessible to end-users, works with existing accessories, requiring less inventory space to store.Industry Standard 24V PowerThe Prodigy is powered by 24V, which has already become an industry standard used to power cameras and light fixtures. This increases efficiency and allows for the use of larger batteries with longer run times. An industry-standard 2-pin LEMO input with built-in automatic polarity switching prevents any chance of shorting out and damaging the compressor when using different cable standards.Built on the Misfit KickThe Air Head can also be used as a standalone matte box and builds on the foundation set by the Misfit Kick. The large field of view makes it ideal for wide-angle lenses, with the Reveal stage delivering the third stage without the need of any additional accessories. It’s light enough to use in a clip-on configuration or with rod supports on a 15mm LWS or 15/19 Studio setup. The top flag is made of carbon fiber, which aids with flare control and adds further protection from the weather.Built for RiggingThe Compressor has a variety of rigging possibilities, featuring helicoil reinforced threads to connect clamps and brackets. When it comes to high-risk stunts, the priority is always safety. For added security, attach a safety line using the tether points on the Air Head and Compressor. The Compressor can be positioned anywhere on the rig using the 50cm (20”) long hose. The bayonet quick-release connectors ensure a leak-free connection.Run/Stop ConnectivityAn industry-standard 3-pin Fischer Run/Stop port allows the Prodigy to be triggered using compatible hand units and remotes.Field-Tested by ProfessionalsThe Prodigy is already in use on feature films and projects like Matt Reeves’ The Batman, shot by DP Greig Fraser ACS, ASC and many more.User-Friendly Control PanelThe buttons on the compressor’s control panel are big and well-lit, making them easy to operate even with gloves on. The warning lights will light up to indicate the operator how to troubleshoot any problems, thanks to built-in error detection. Future firmware updates may be completed by the user without requiring the unit to be sent in using the Type-C USB connection.   Product Highlights Easily deflects rain and other debris for a clear lens 50cm (20") long hose allows for flexible compressor placement Rugged and tough construction for use in any weather conditions Includes all necessary cables, accessories and spares Set up for three stages, with 15mm LWS support using Black Hole In the box B5000.1001 - Prodigy Air Deflector Compressor B5000.1002 - Prodigy Air Head 2x B5000.1004 - Prodigy Power Cable 2x B5000.1007 - Prodigy Hose B5000.1009 - Prodigy Top Flag 3x B1251.1042 - 4x5.65"/4x4" Filter Tray (Misfit Kick) B5000.1006 - Prodigy Spare Glass B1235.1017 - Frame Safe Clamp Adapter (143mm) B1250.1076 - Black Hole Rubber Donut (143mm) B1235.1002 - 15mm LWS Support Bracket (Misfit Kick)  

The Prodigy Air Head takes pressurised air from the Compressor through the connected hose and creates barrier over a  specially treated piece of glass for a clear lens. With advanced processes, we can make a glass that is optically clear with no effect on image quality or exposure, and it has excellent impact resistance. Any water or liquid on the surface slides off and doesn’t bead up after being treated with a  superhydrophobic coating. Spare glass is accessible if it gets damaged or breaks, and replacing it takes only a few minutes.BUILT ON THE MISFIT KICKThe Air Head can also be used as a standalone matte box. The large field of view makes it ideal for wide-angle lenses, with the Reveal stage delivering the third stage without the need of any additional accessories. It’s light enough to use in a clipon configuration or with rod supports on a 15mm LWS or 15/19 Studio setup.Compared to spinners, the Prodigy has far fewer moving parts. With no bearings to physically spin the glass, there is less maintenance to do. Constructed from high-grade aluminum, and stainless steel, making it extremely durable, rugged, and waterproof. It can endure any harsh conditions in either hot or cold climates.EXTRA CARE COMES STANDARDHand-built in our single factory in Church Crookham from high-grade materials. The Prodigy Air Head comes with our famous Bright Tangerine Support and the addition of a 24-month warranty.   Product Highlights Keep your lens clear to shoot through rain, dust and debris Low maintenance with no moving parts Flat surfaces make it easy to bag your camera No vignetting with wide angle lenses on large format sensors Can be set up for clip-on or rod mounted with full range of Frame Safe clamp adapters  

The Prodigy Air Deflector Compressor filters and compresses air, accelerating it to 300+ mph through the connected hose to the Air Head. It is extremely durable, rugged, and waterproof, and can endure any harsh conditions in either hot or cold climates. BUILT FOR PROFESSIONALS The Compressor can be placed up to 50cm (20") away from the Air Head and has a variety of rigging possibilities. When in high risk situations, connect a safety wire to the tether point for added peace of mind. Powered by industry-standard 24V for high efficiency and ability to use larger batteries for longer run times. The 2-pin LEMO port has built-in automatic polarity switching to prevent any short circuits and potential damage. The 3-pin Fischer Run/Stop port allows the Prodigy to be triggered using compatible hand units and remotes. USER-FRIENDLY The large buttons on the control panel are easy to operate with gloves on, and future firmware updates can be done by the user using the Type-C USB port. The warning lights will light up to indicate the operator how to troubleshoot any problems, thanks to built-in error detection. The air filter is a drop-in replacement with no special tools required that can be done in the field. EXTRA CARE COMES STANDARD Hand-built in our single factory in Church Crookham from high-grade materials. The Prodigy Compressor comes with our famous Bright Tangerine Support and the addition of a 24-month warranty   Product Highlights Easy to rig using arms, rod brackets and clamps Simple interface for operation with R/S connectivity Automatic Polarity Detection (2-pin LEMO for US or ARRI Standard) Rugged housing and military-grade filtration Self-serviceable in the field or on location

Clear lens with the Prodigy Air Deflector The Prodigy Air Deflector is the perfect solution for keeping a clear lens. At Glastonbury Festival, where it was raining, we noticed the camera operators continually wiping water off the lens. Rain deflectors have been employing spinning discs and centrifugal forces for decades and have several disadvantages. The underlying principles haven’t changed in almost 30 years. We knew there had to be a better solution. With a simple push of a button, the patented design can be quickly deployed to provide you with the clear shot you need in any condition. Harnessing the Power of AirBefore it’s compressed and accelerated at 300+ mph, air is filtered to 1 micron and passes through the hose to the Air Head. The air attaches to the specially treated piece of glass, deflecting any water or particles that might otherwise ruin the shot. The pressurised air provides a barrier over the entire frame with no dead zones where water might accumulate. The Prodigy is quieter and produces sound at a lower frequency than traditional rain spinners, resulting in less discomfort for the talent, crew and environment. The downward force imitates gravity and the natural movement of rainfall.No Spinning GlassWith no need for a spinning piece of glass, we eliminate many limitations in traditional designs. The Prodigy has no centrifugal forces at play so there’s no gyroscopic effect for the operators to manage. This makes it a much easier experience for the operator whether it’s panning on a tripod or operating in handheld. The glass in the Prodigy is secured in place dissipating any vibrations, making it stronger and less likely to break from impacts.Optically Clear, Impact Resistant and SuperhydrophobicThe special piece of glass goes through a number of advanced manufacturing processes. The end result is a glass that’s optically clear with no effect on image quality or exposure,and has excellent impact resistance. Any water or liquid on the surface slides off and doesn’t bead up after being treated with a superhydrophobic coating.More Creativity and Fewer RetakeWith an airspeed of over 300 mph, the lens is cleaned almost immediately, with some particles not even coming into contact with the glass, making it ideal for high-speed work. The compressor has three different speeds so you can choose the one that best matches your desired look and feel.Saves Time On SetThe Air Head doesn’t emit any heat, so there’s no fogging on the lens or filters. This also saves time because you don’t have to unbag the camera and lens to clear the lens before shooting.Plastic bagging is easily secured to waterproof the camera and other electronics because of the flat sides.Rental Friendly & Easy MaintenanceCompared to spinners, the Prodigy has far fewer moving parts. With no bearings to physically spin the glass, there is less maintenance to do. Constructed of carbon fiber, high-grade aluminum, and stainless steel, making it extremely durable, rugged, and waterproof. It can endure any harsh conditions in either hot or cold climates. It won’t rust or corrode. When you need to replace your glass, it’s simple and quick to do so. Spare glass is accessible if it gets damaged or breaks. This results in a faster ROI for rental investments and the lower cost makes it more accessible to end-users, works with existing accessories, requiring less inventory space to store.Industry Standard 24V PowerThe Prodigy is powered by 24V, which has already become an industry standard used to power cameras and light fixtures. This increases efficiency and allows for the use of larger batteries with longer run times. An industry-standard 2-pin LEMO input with built-in automatic polarity switching prevents any chance of shorting out and damaging the compressor when using different cable standards.Built on the Misfit KickThe Air Head can also be used as a standalone matte box and builds on the foundation set by the Misfit Kick. The large field of view makes it ideal for wide-angle lenses, with the Reveal stage delivering the third stage without the need of any additional accessories. It’s light enough to use in a clip-on configuration or with rod supports on a 15mm LWS or 15/19 Studio setup. The top flag is made of carbon fiber, which aids with flare control and adds further protection from the weather.Built for RiggingThe Compressor has a variety of rigging possibilities, featuring helicoil reinforced threads to connect clamps and brackets. When it comes to high-risk stunts, the priority is always safety. For added security, attach a safety line using the tether points on the Air Head and Compressor. The Compressor can be positioned anywhere on the rig using the 50cm (20”) long hose. The bayonet quick-release connectors ensure a leak-free connection.Run/Stop ConnectivityAn industry-standard 3-pin Fischer Run/Stop port allows the Prodigy to be triggered using compatible hand units and remotes.Field-Tested by ProfessionalsThe Prodigy is already in use on feature films and projects like Matt Reeves’ The Batman, shot by DP Greig Fraser ACS, ASC and many more.User-Friendly Control PanelThe buttons on the compressor’s control panel are big and well-lit, making them easy to operate even with gloves on. The warning lights will light up to indicate the operator how to troubleshoot any problems, thanks to built-in error detection. Future firmware updates may be completed by the user without requiring the unit to be sent in using the Type-C USB connection.   Product Highlights Easily deflects rain and other debris for a clear lens 50cm (20") long hose allows for flexible compressor placement Rugged and tough construction for use in any weather conditions Reveal Stage expands for a third filter stage Requires Frame Safe clamp adapter - available in 11 sizes In the box B5000.1001 - Prodigy Air Deflector Compressor B5000.1002 - Prodigy Air Head B5000.1004 - Prodigy Power Cable B5000.1007 - Prodigy Hose B5000.1009 - Prodigy Top Flag 2x B1251.1042 - 4x5.65"/4x4" Filter Tray (Misfit Kick)  

The Prodigy accelerates air to over 300 miles per hour. The high airflow filter purifies to 1 micron blocking out dust particles and debris from entering the compressor.It is robust, waterproof, and designed to operate in a wide temperature range (-40 to +50°C) so you can use the Prodigy in any type of environment.EASY INSTALLATIONThe filter in the Prodigy Compressor needs to be replaced every 12 months or sooner, so that you can maintain the highest possible level of performance. To replace it is simple: remove four mounting screws on the bottom and remove the housing. Remove the old filter and drop in the new filter. Reattach the housing and you’re ready to go.Product Highlights Prevents particles from entering the compressor Military-grade filtration designed for high airflow Filters out any particle larger than 1 micron Waterproof and operates in a wide temperature range  

The Prodigy Glass has been through a nummer of manufacturing processes to create a piece of glass with special properties.The air flow from the compressor attaches to the glass to deflect water and particles out of view.IMPACT-RESISTANTThe Prodigy Glass is neutral and impact resistant, free of unwanted color shifts while protecting expensive front elements and filters. It provides a barrier for any debris or particles which would otherwise damage the lens during stunts or action scenes.WATER REPELLANTThe glass has also been treated with a superhydrophobic coating that prevents water from beading on the surface. Combined with the Prodigy air flow, any water is cleared almost instantly.EASY INSTALLATIONThe replacement of the glass is a simple process that can be done in minutes. Using a 4mm Hex key, undo the screw to remove the access panel. Slide out the old glass and insert the new glass. Reattach the access panel and fixing screw and you’re ready to go.Product Highlights Impact-resistant against chips and scratches Superhydrophobic coating to repel water and particles Optically clear to maintain lens characteristics Easy to replace and install in a few minutes  

A custom-made flexible hose for air to flow from the compressor to the Air Head. Purpose-built to handle the high pressure and volume requirements.QUICK RELEASE CONNECTORSAttaching the Prodigy Compressor and Air Head is easy using the quick release connectors on each end. The custom designed bayonet fittings ensure a secure fit and are a one-piece construction, removing any chance of air leaks or loss in pressure which could affect the air flow.DESIGNED FOR HIGH PRESSUREThe Prodigy Hose is 50cm (20") in length, allowing for the compressor to be placed in a range of positions on the camera rig. It is kink resistant so it can be articulated and tied down without affecting the air flow.Product Highlights Purpose-built to handle high pressure and large volume of air 50cm (20") long hose allows for flexible compressor placement Kink resistant and durable to provide high air flow One-piece quick release bayonet fittings for no leaks  

The LeftField System for the Sony VENICE 2 has been built to reliably deliver time after time. The cage provides an extremely rigid frame for rigging with helicoil reinforced mounting points, rosettes for handles & 15mm rod support for EVFs and focus motors. Time on set is critical, each part of the system has been designed to allow ACs and operators to move faster with quick release dovetails which can be preconfigured during prep. Multiple safety mechanisms have been integrated removing any chance of failure & accidents on set. Completely rigid cage for rigging with detachable baseplate for low profile setups on gimbal/steadicam. Multiple safety mechanisms for increased reliability on set Patented Open•UP quick-release to snap on/off any ARRI standard dovetail. Top & bottom 15mm LWS rod mount, ARRI rosettes, 1/4” & 3/8” threaded points for accessory mounting. DVF-EL200 ready with Axl EVF mount with 3-axis locking knob for fast adjustments. WHAT’S INCLUDED Each Advanced Kit comes with the Sliding Top Plate, Side Plates, Split Riser 15mm LWS Baseplate, D-Style Top Handle, Axl EVF mount (DVF-EL200), 4″ & 12″ Drumstix 15mm rod pairs & the ARRI BP-8/BP-9 Dovetail adapter. The kit is also compatible with the KASBAH shoulder support system with a range of hand grip options and shoulder pad for all-day comfort. ZERO COMPROMISES Every part of the LeftField System is machined from single aluminium-alloy billets to create extremely rigid and light weight components. All of which play perfectly to the strengths of the Sony VENICE 2. Absolutely no compromise has been made in our manufacturing process. Our engineering is focused on creating products that are both high-performance and enabled with a longer life of service. Combine that with unparalleled level of Bright Tangerine support, and your LeftField Sony VENICE 2 System becomes the most reliable and hard-working partnership that any filmmaker could wish for. Weight: 1.91 kg Dimensions: 30 × 30 × 25 cm  

The LeftField System for the Sony VENICE 2 has been built to reliably deliver time after time. The cage provides an extremely rigid frame for rigging with helicoil reinforced mounting points, rosettes for handles & 15mm rod support for EVFs and focus motors. Time on set is critical, each part of the system has been designed for rapid changes in a safe manner with interchangeable dovetails that can be preconfigured. Reliability is a key factor for large productions. Multiple safety mechanisms have been integrated removing any chance of failure & accidents on set. Completely rigid cage for rigging with detachable baseplate for low profile setups on gimbal/steadicam. Multiple safety mechanisms for increased reliability on set Patented Open•UP quick-release to snap on/off any ARRI standard dovetail Top & bottom 15mm LWS rod mount, ARRI rosettes, 1/4″ & 3/8″ threaded points for accessory mounting. DVF-EL200 ready with Axl EVF mount with 3-axis locking knob for fast adjustments. WHAT’S INCLUDED Each Base Kit comes with the Sliding Top Plate, Side Plates, Split Riser 15mm LWS Baseplate & Standard Top Handle. The kit is also compatible with the KASBAH shoulder support system with a range of hand grip options and shoulder pad for all-day comfort. ZERO COMPROMISES Every part of the LeftField System is machined from single aluminium-alloy billets to create extremely rigid and light weight components. All of which play perfectly to the strengths of the Sony VENICE 2. Absolutely no compromise has been made in our manufacturing process. Our engineering is focused on creating products that are both high-performance and enabled with a longer life of service. Combine that with unparalleled level of Bright Tangerine support, and your LeftField Sony VENICE 2 System becomes the most reliable and hard-working partnership that any filmmaker could wish for.  

The LeftField System for the Sony VENICE 2 has been built to reliably deliver time after time. The cage provides an extremely rigid frame for rigging with helicoil reinforced mounting points, rosettes for handles & 15mm rod support for EVFs and focus motors. Time on set is critical, each part of the system has been designed to allow ACs and operators to move faster with quick release dovetails which can be preconfigured during prep. Multiple safety mechanisms have been integrated removing any chance of failure & accidents on set. Completely rigid cage for rigging with detachable baseplate for low profile setups on gimbal/steadicam. Multiple safety mechanisms for increased reliability on set. Patented Open•UP quick-release to snap on/off any ARRI standard dovetail. Top & bottom 15mm LWS rod mount, ARRI rosettes, 1/4” & 3/8” threaded points for accessory mounting. DVF-EL200 ready with Axl EVF mount with 3-axis locking knob for fast adjustments. WHAT’S INCLUDED Each Expert Kit comes with the Sliding Top Plate, Side Plates, Split Riser 15mm LWS Baseplate, D-Style Top Handle, Axl EVF mount (DVF-EL200), 4″ & 12″ Drumstix 15mm rods, ARRI 300mm Balance plate & a 19mm rod mount. The kit is also compatible with the KASBAH shoulder support system with a range of hand grip options and shoulder pad for all-day comfort. ZERO COMPROMISES Every part of the LeftField System is machined from single aluminium-alloy billets to create extremely rigid and light weight components. All of which play perfectly to the strengths of the Sony VENICE 2. Absolutely no compromise has been made in our manufacturing process. Our engineering is focused on creating products that are both high-performance and enabled with a longer life of service. Combine that with unparalleled level of Bright Tangerine support, and your LeftField Sony VENICE 2 System becomes the most reliable and hard-working partnership that any filmmaker could wish for. Weight: 2.5 kg Dimensions: 30 × 30 × 25 cm  

Craft your image with filters to get the shot you envision. This kit is ready for three 4×5.65” filters, with 15mm LWS Swing Away support for faster lens changes without having to remove the matte box. Independent 360-degree rotating filter stage for use with polarisers, graduated ND & FX filters. Swing away provides clear access to swap lenses & accessories. Compatible with 4×5.65″, 5×5″ or 5.65×5.65″ trays & filters. Offers a wide field-of-view and maximum coverage for cine-servo lenses. Combines with Frame Safe clamp adapters to suit a range of lenses, available in 80-143mm sizes. 360-Degree Rotation The kit includes the expansion pack, with both rear stages offering 360-degrees of rotation, useful for positioning graduated NDs or adding a polariser to reduce glare or reflections. Wide Angle Coverage with support up to 5.65×5.65″ For operators using wide angle cine-servo lenses, the Misfit Kick 360 supports larger 5×5” & 5.65×5.65” trays & filters, removing the risk of vignetting, even when rotating the stage. Frame Safe To complete the system, simply add a Frame Safe clamp adapter to suit your lens available from 80mm to 143mm diameters. It is also compatible with ARRI clamp adapters. British Workmanship Machined and hand-finished in our single factory in Church Crookham from high-grade materials. Hard anodised for extended durability. The Misfit Kick 360 comes with our famous Bright Tangerine Support and the addition of a 5 year warranty. Weight: 1 kg Dimensions: 35 × 25 × 12 cm