Bit Part

Compact Wireless Camera Control with Full Certified Range The Bitbox Mini delivers industry-grade wireless camera and lighting control in the smallest and lightest form factor available today. Designed to integrate seamlessly with existing bitbox ecosystems, the Mini is engineered for professional cinematographers, camera assistants, and tech crews who require dependable remote control performance on set without unnecessary bulk or complexity. Weighing under 50 g and roughly the size of a typical AirPods Pro case, this unit fits comfortably on compact rigs, gimbals, drones, or any camera build where space and weight matter most without sacrificing operational reliability. Unlike larger control radios, the Bitbox Mini is optimized specifically as a remote node, with a focus on delivering secure, interference-managed sub-GHz wireless communications. When paired with a full-featured bitbox base station, it enables robust control of camera parameters from a distance of up to 1 km line-of-sight, enabling crews to operate remotely while maintaining full access to menu systems, exposure settings, recording controls, and lighting devices. Its design adheres to FCC, ISED, and CE compliance standards, making it suitable for use in the most tightly regulated RF environments across North America and Europe—a critical consideration for professional productions where spectrum coordination and certification are prerequisites. Constructed from durable, RoHS-compliant materials with an injection-molded housing composed of 60 % post-consumer recycled plastic and a machined aluminum mounting plate, the Bitbox Mini is built for repeated use in demanding production environments. It offers a straightforward connection via 100 Mbps Ethernet and includes an omnidirectional quarter-wave antenna, providing reliable radio performance and easy integration with existing cable workflows. While it omits USB-C and internal expansion capabilities to maintain its compact footprint, its core functionality ensures that smaller setups and lightweight rigs can still benefit from professional remote control without compromise.  Features — Bitbox Mini (English) Ultra-compact wireless camera and lighting control module Weighs under 50 g, ideal for lightweight rigs and portable setups Designed as a remote-only node (requires bitbox base station) Up to 1 km line-of-sight range Sub-GHz radio protocol for robust signal penetration FCC, ISED, and CE compliance for regulated environments Engineered for professional cinema production workflows Industrial-grade electronics and components Injection-molded enclosure with aluminum mounting plate RoHS-compliant manufacturing process Easy Ethernet connection (100 Mbps) Omnidirectional quarter-wave antenna included Compatible with major camera control systems over Ethernet Low-profile form factor for tight spaces Designed to expand existing bitbox networks Reliable performance on compact production rigs Technical Specifications (English) Device Type: Remote wireless camera control radio Radio Module: Bit Part BP.BBR.V1.915 Range: Up to 1 km line-of-sight Compliance: FCC, ISED, CE Connection: 100 Mbps Ethernet Ports: LEMO 2-Pin Power, Ethernet Power Requirement: Industry standard 2-pin LEMO power input Antenna: Omnidirectional quarter-wave included USB-C: Not included Internal Expansion: None Internal Ethernet Switch: None Operating Temperature: Professional equipment range (typical) Mounting: Integrated aluminum mounting plate Control Mode: Remote only LED Indicators: Signal and status indicators Firmware: Field-upgradeable Compatibility: Works with bitbox ecosystems Certification: CE, FCC, ISED Dimensions & Weight (English) Dimensions (approximate): 58.9 mm × 42 mm × 19.75 mm Weight: ~48 g Housing Material: 60 % post-consumer recycled plastic Mounting Plate Material: Machined aluminum 

Professional Long-Range Wireless Ethernet BridgeThe Bit Part Bitbox is a purpose built long range wireless Ethernet bridge engineered for professional film and broadcast environments. Instead of relying on congested 2.4 GHz and 5 GHz WiFi bands, the Bitbox operates in the 915 MHz spectrum, creating a stable and interference resistant point to point data link for camera control and network integration. In high density RF environments such as soundstages, studios, OB trucks, and urban locations, conventional WiFi networks are frequently compromised by wireless video systems, lens control, and consumer devices. The Bitbox eliminates these bottlenecks by establishing a transparent Layer 2 bridge that behaves like an invisible Ethernet cable between camera and control device. The lower frequency architecture provides superior signal penetration through concrete, steel, and structural obstacles. This results in reliable connectivity over multiple city blocks in interference heavy areas and several miles in clear line of sight conditions. The ultra low latency design ensures real time camera parameter adjustments without perceptible delay. Designed for seamless integration into professional camera builds and DIT carts, the Bitbox features direct USB C to tablet connectivity through its integrated Ethernet chipset. There is no SSID management, no web interface, and no complex configuration. A dedicated hardware pairing button enables secure device matching in seconds. With a polarity agnostic 2 pin Lemo 0B input supporting 11 to 36 volts, the Bitbox protects against wiring errors common in rental environments. When powered via Lemo, it actively supplies up to 1.5 amps over USB C, capable of maintaining charge on an iPad Mini during full brightness operation. Consuming only 1.8 watts on average, it minimizes load on camera batteries while delivering maximum network stability. The CNC machined aluminum chassis ensures durability under demanding production conditions. Compact, lightweight, and built for reliability, the Bitbox is the definitive wireless Ethernet solution for remote camera control where failure is not an option. Features Bitbox • 915 MHz wireless architecture for interference free operation • Transparent Layer 2 Ethernet bridge • No SSID, no web GUI, zero configuration workflow • Ultra low latency for real time camera control • Validated long range performance in dense urban RF environments • Multi mile range in line of sight conditions • Gigabit Ethernet RJ45 port • Direct USB C to tablet connectivity without external dongles • Integrated USB Ethernet chipset • Sub five second boot time • Secure hardware pairing button • Base and Remote hardware role switch • High visibility LED status indicators • Polarity agnostic 2 pin Lemo 0B power input • Wide voltage input range 11 to 36 volts DC • USB C power passthrough up to 1.5A when powered via Lemo • Average power consumption of 1.8 watts • CNC machined high grade aluminum chassis • Multiple professional mounting patterns Technical Specifications • Frequency range 915 MHz North America • Regional variants available for EU and UK CE UKCA • Network interface 1x Gigabit Ethernet RJ45 • Wireless architecture point to point bridge • Latency optimized for real time control protocols • Secure hardware based pairing system • Field replaceable SMA antenna • Primary power input 2 pin Lemo 0B 11 to 36V DC • Polarity independent power design • Secondary power input 5V via USB C • USB C output power up to 5V 1.5A when powered by Lemo • Integrated USB C Ethernet bridge chipset • Boot time under 5 seconds • Average power draw 1.8W • Chassis material 6061 and 7075 aluminum • Black anodized surface finish • 1/4 20 threaded mounting hole with ARRI and SmallHD anti rotation geometry • 15mm grid with 10x M4 mounting points • 20mm grid with 7x M2.5 mounting points compatible with Wooden Camera mini rail Dimensions • Dimensions 81.1 mm x 51.2 mm x 21.8 mm (3.19 inch x 2.01 inch x 0.86 inch)

Professional Handheld Control for Bitbox The Bit Part Bitbox iPad Plate is a fully native mounting solution engineered to transform the Apple iPad Mini into a robust, professional handheld control surface for bitbox systems. Designed specifically for the Apple iPad Mini (6th generation and newer), this plate creates a compact, balanced, and production-ready camera control unit suitable for on-set operation, carts, desks, and mobile workflows. Developed in close collaboration with Possum Solutions, the Bitbox iPad Plate focuses on real-world usability for camera assistants, DITs, and technicians. The design allows a bitbox radio to be directly hard-mounted to the plate, ensuring a secure mechanical connection and eliminating unnecessary adapters. For alternative workflows, an additional 1/4-20 mounting point behind the bitbox supports third-party quick-release systems such as Wedgie, Lnkcine, or Cinelock. Power management is fully integrated. The plate ships with a genuine bebob AMMicro battery plate and also supports compatible Anton Bauer Gold Mount or V-Mount micro plates, depending on the selected version. The battery plate can be mounted in multiple orientations, allowing the iPad to rest at a comfortable viewing angle on a cart or desk, or to support horizontal battery placement for alternative docking and handheld configurations. Machined from high-grade aluminum and finished with a durable anodized coating, the Bitbox iPad Plate is built for daily professional use. Extensive mounting points, support for Wooden Camera mini rails, and integrated cable routing ensure a clean, secure, and modular setup. Thoughtful details such as corner loops designed for Peak Design Anchor Links further enhance portability and safety on set. Available in Space Gray, Black, and high-visibility Signal Orange, the Bitbox iPad Plate combines functional engineering with a distinctive professional aesthetic. Features – Bit Part Bitbox iPad Plate Native mounting plate for bitbox and iPad Mini (6th gen and newer) Designed as a dedicated handheld bitbox control unit Precision-machined aluminum construction Direct hard-mount screw pattern for bitbox radios Additional 1/4-20 mounting point behind the bitbox Supports Wedgie, Lnkcine, Cinelock and similar mounts Genuine bebob AMMicro battery plate included (variant-dependent) Supports Gold Mount or V-Mount micro battery plates Battery plate mountable in multiple orientations Comfortable viewing angle for cart and desk operation Horizontal battery option for alternative docking workflows Ample 1/4-20 and 3/8-16 threaded mounting holes Outer screw pattern compatible with Wooden Camera mini rails Integrated internal cable routing for clean builds Corner loops compatible with Peak Design Anchor Links Balanced design for extended handheld use Available in Space Gray, Black, and Signal Orange (RAL2010) Built for professional cinema and broadcast environments Technical Specifications Compatibility: Apple iPad Mini 6th generation and newer Primary material: CNC-machined aluminum Aluminum grade: Plate assembly in 6061 T6, mounting interfaces optimized for rigidity Finish: Anodized (color variant dependent) bitbox mounting: Dedicated screw mounting pattern Alternative mounting: 1/4-20 threaded interface Battery support: Gold Mount or V-Mount micro (variant dependent) Included battery plate: bebob AMMicro Gold Mount (GM versions) Power cable: Genuine LEMO FGG.0B 2-pin cable included USB-C cable: Bit Part custom USB-C ribbon cable included Rail support: Wooden Camera mini rail pattern Thread standards: 1/4-20 and 3/8-16 Cable management: Internal routing through plate Use cases: Handheld, cart-based, desk-based control Color options: Space Gray, Black, Signal Orange Shipping status: First production wave shipping May 2025 Dimensions & Weight Dimensions: 212 mm × 150 mm × 29 mm Weight: approx. 500 g Form factor: Compact, balanced handheld plate Optimized for portability without compromising rigidity Available Versions & SKUs Bitbox iPad Plate Space Gray / Gold Mount – SKU: BP.AKS.IPM.SG.G Bitbox iPad Plate Space Gray / V-Mount – SKU: BP.AKS.IPM.SG.V Bitbox iPad Plate Black / Gold Mount – SKU: BP.AKS.IPM.B.G Bitbox iPad Plate Black / V-Mount – SKU: BP.AKS.IPM.B.V Bitbox iPad Plate Signal Orange / Gold Mount – SKU: BP.AKS.IPM.O.G Bitbox iPad Plate Signal Orange / V-Mount – SKU: BP.AKS.IPM.O.V

Precision Mounting for Professional Rigs The Bit Part Bitbox Mounting Plate is a purpose-built mounting solution designed to integrate the bitbox cleanly and securely into professional camera rigs. Engineered for reliability on set, it provides a flexible and robust interface between the bitbox and industry-standard mounting hardware, ensuring stable operation even in demanding production environments. Machined from aerospace-grade 7075 T6 aluminum, the mounting plate offers exceptional strength while remaining lightweight. This material choice ensures long-term durability, resistance to deformation, and consistent performance under mechanical stress, making it suitable for daily use in rental and production workflows. The rotatable and variable-offset design allows precise positioning of the bitbox, enabling optimal cable routing, antenna clearance, and ergonomic placement on compact or complex camera builds. Multiple threaded mounting options support seamless integration with cages, rods, arms, and accessories commonly used in cinema production. With ARRI anti-rotation compatibility and both horizontal and vertical mounting slots, the Bitbox Mounting Plate delivers maximum flexibility while preventing unwanted movement. It is the ideal solution for camera assistants, DITs, and technicians who require a secure, adaptable, and professional mounting interface for their bitbox systems. Features – Bit Part Bitbox Mounting Plate Precision-machined from aerospace-grade 7075 T6 aluminum Rotatable design for flexible orientation Variable offset for optimal positioning on any rig 1/4-20 and 3/8-16 threaded holes ARRI anti-rotation hole pattern for secure mounting Horizontal 1/4-20 mounting slots Vertical 1/4-20 mounting slots Designed specifically for Bit Part bitbox devices Technical Specifications Material: 7075 T6 aerospace-grade aluminum Manufacturing process: CNC milled Thread types: 1/4-20 and 3/8-16 Anti-rotation standard: ARRI-compatible Mounting orientation: Horizontal and vertical Design: Rotatable with variable offset Intended use: Professional cinema camera rigs Dimensions & Weight Compact, low-profile design for tight rig configurations Lightweight aluminum construction for minimal added mass Optimized thickness for strength without bulk

Antenna (868 MHz) – Compact Certified RF for Tight Rigs The Bit Part Bitbox Short Antenna (868 MHz) is a compact, purpose-built RF antenna designed for Bit Part bitbox and bitbox mini devices operating in Europe. Tuned specifically for the 868 MHz band, it delivers stable and compliant wireless performance while minimizing physical footprint on camera rigs, carts, and handheld setups. This short antenna is ideal for applications where space is limited or where a low-profile configuration is preferred, such as gimbals, drones, compact builds, or densely populated rigs. Despite its reduced length, the antenna is electrically matched to bitbox radios to maintain reliable signal quality and consistent operation in professional environments. For regulatory compliance, Bit Part uses RP-SMA connectors as part of its certified RF system design. This antenna features an RP-SMA interface and is intended exclusively for use with certified Bit Part devices. It will not function with uncertified, modified, or homemade equipment that typically uses standard SMA connectors. Using the correct antenna is essential not only for performance, but also for maintaining legal RF operation within European regulations. Built for daily professional use, the Bitbox Short Antenna combines durability with practical design. It is an essential accessory for users who need a discreet, compliant, and dependable antenna solution without compromising the integrity of their wireless bitbox workflow. Features – Bit Part Bitbox Short Antenna (868 MHz) Designed specifically for bitbox and bitbox mini devices Tuned for the European 868 MHz frequency band Short, low-profile design for compact rigs RP-SMA connector for certified RF compliance Ideal for tight spaces and minimal setups Optimized for stable wireless performance Maintains regulatory conformity in Europe Durable construction for professional use Lightweight design to reduce strain on RF ports Technical Specifications Frequency band: 868 MHz Connector type: RP-SMA Antenna type: Short monopole Intended devices: Certified Bit Part bitbox systems Regulatory region: Europe Polarization: Linear Application: Wireless camera control Compatibility note: Not compatible with SMA connectors Designed exclusively for certified RF devices Dimensions & Weight Short, compact antenna form factor Lightweight construction for minimal added bulk Optimized length for discreet mounting on camera rigs

Antenna (868 MHz) – Certified RF Performance for Europe The Bit Part Bitbox Antenna (868 MHz) is a purpose-built, articulating RF antenna designed specifically for Bit Part bitbox devices operating in European regulatory domains. Tuned precisely for the 868 MHz band, this antenna ensures optimal signal integrity, range, and reliability in professional wireless camera control environments. Unlike generic or uncertified antennas, this model is engineered to meet strict regulatory requirements. Bit Part uses RP-SMA connectors as part of its certified RF design, which is a critical distinction in professional and legally compliant wireless systems. As a result, this antenna is fully compatible only with certified bitbox devices and will not function with uncertified, modified, or homemade RF hardware. The articulating joint allows flexible positioning of the antenna, making it easy to optimize orientation for best signal performance while accommodating tight rig layouts, carts, or fixed installations. This is particularly important on set, where antenna placement can significantly impact wireless reliability due to interference, obstructions, or changing camera positions. Designed for daily professional use, the Bitbox Antenna combines robust mechanical construction with electrically optimized performance. It is an essential accessory for maintaining compliance, consistency, and dependable wireless operation when using bitbox systems in Europe. Features – Bit Part Bitbox Antenna (868 MHz) Designed specifically for Bit Part bitbox devices Tuned for the European 868 MHz frequency band Articulating joint for flexible antenna positioning RP-SMA connector for certified RF compliance Optimized for reliable wireless camera control Maintains regulatory conformity in Europe Compact form factor for professional rigs Durable construction for on-set use Stable performance in challenging RF environments Technical Specifications Frequency band: 868 MHz Connector type: RP-SMA Antenna type: Articulating monopole Intended devices: Certified Bit Part bitbox systems Regulatory region: Europe Polarization: Linear Application: Wireless camera control and data transmission Compatibility note: Not compatible with SMA connectors Designed for certified RF systems only Dimensions & Weight Compact, low-profile antenna design Lightweight construction to minimize strain on RF ports Optimized length for 868 MHz operation

Reliable Ethernet Connectivity for RED Cameras The Bit Part RED GigE Cable is a professional-grade Ethernet cable designed specifically for RED cameras equipped with a GigE port. Engineered for reliable data communication in demanding production environments, this cable enables stable, high-speed Ethernet connectivity between RED cameras and external control, monitoring, or networking systems such as bitbox-based workflows. Built with a genuine LEMO 9-pin OB connector on the camera side, the RED GigE Cable ensures a secure, locking connection that withstands frequent handling and rig reconfigurations on set. The Ethernet termination provides seamless integration with standard network infrastructure, allowing for dependable camera control, data exchange, and IP-based workflows commonly used in modern cinema production. With a practical cable length of 18 inches, the RED GigE Cable is optimized for clean and efficient rig layouts. It minimizes excess cable while allowing sufficient flexibility for handheld builds, studio configurations, or cart-based setups. This thoughtful length helps reduce strain on connectors and supports tidy cable management, which is critical in professional camera environments. As a custom-order product, each cable is assembled and tested to meet Bit Part’s quality standards before shipping. Designed for use with RED Digital Cinema cameras, the RED GigE Cable is a dependable solution for camera assistants, DITs, and technicians who require robust Ethernet connectivity without compromise. Typical lead time is approximately 14 days, reflecting the care and precision involved in its production. Features – Bit Part RED GigE Cable Designed specifically for RED cameras with GigE port Genuine LEMO 9-pin OB connector for secure camera connection Ethernet termination for standard network integration 18-inch cable length optimized for camera rigs Reliable Ethernet data transmission Locking LEMO connector prevents accidental disconnection Clean and compact solution for professional setups Custom-assembled for consistent quality Suitable for handheld, cart, and studio workflows Technical Specifications Camera connector: LEMO 9-pin OB Network connector: Ethernet (RJ45) Cable length: 18 inches (approx. 46 cm) Compatibility: RED cameras with GigE port Signal type: Gigabit Ethernet data Connector quality: Genuine LEMO Assembly: Custom-built to order Intended use: Professional cinema production Robust construction for on-set reliability Dimensions & Weight Cable length: 18 inches (46 cm) Lightweight and flexible design Compact form factor for tight camera rigs Bitbox Cable Guide All ARRI ALEXA Cameras Alexa Y CableAnglissimo Alexa Y Cable (Right Angle – preferred for Alexa MINI and MINI LF) Red V-Raptor XL RED GigE Cable 9-pin LEMO OB Red Komodo USB-C Red V-Raptor USB-C Sony Venice 1 & 2 Ethernet / RJ45 Cable Sony Burano Ethernet / RJ45 Cable Freefly Ember Ethernet / RJ45 Cable Phantom Flex 4K 8-pin Fischer to RJ45 Cable (Phantom owners usually have these already) Pixboom Spark USB-C Canon C80 Ethernet / RJ45 Cable Canon C400 Ethernet / RJ45 Cable * All cameras with Ethernet/RJ 45 Connection

Reliable Power and Ethernet Integration The Bit Part Anglissimo Alexa Y Cable is a professional-grade interface cable designed to connect ARRI ALEXA cameras to Bit Part bitbox systems, delivering both power and Ethernet data through a single, streamlined solution. Built for demanding production environments, this cable simplifies rig setup while maintaining the reliability and safety required for high-end cinematography. Equipped with genuine LEMO connectors and enhanced with the precision Anglissimo alignment system, the cable ensures secure, long-lasting connections even under repeated use on busy film sets. The 18-inch length provides optimal flexibility for clean cable management, enabling tidy routing on handheld rigs, carts, or stationary setups. The ALEXA Ethernet port outputs 24 volts, which the Y cable delivers directly via the 2-pin LEMO connector. This voltage falls safely within the bitbox’s 11–36V input range, allowing direct camera-powered operation without additional regulators or adapters. By consolidating power and data transmission in a single cable, the Anglissimo Alexa Y Cable reduces clutter, streamlines setup, and minimizes potential failure points. As a custom-order product, each cable is carefully assembled and tested to meet Bit Part’s strict quality standards. Its robust design ensures reliable power delivery, clean data transmission, and consistent performance in professional cinema applications. The Anglissimo integration further enhances connector longevity and alignment precision, making this cable a dependable choice for camera assistants, DITs, and technical crews. Features – Bit Part Anglissimo Alexa Y Cable Designed for ARRI ALEXA cameras Combined power and Ethernet Y cable in one solution Genuine LEMO connectors with Anglissimo precision alignment 18-inch cable length for flexible rig integration Delivers 24V directly from the ALEXA Ethernet port Compatible with bitbox input voltage range of 11–36V Reduces cable clutter on handheld or cart setups Custom-assembled to meet professional production standards Durable, reliable construction for repeated on-set use Optimized for clean and efficient camera-powered operation Technical Specifications Connector type: Genuine LEMO with Anglissimo integration Cable length: 18 inches (46 cm) Power output: 24V via 2-pin LEMO connector bitbox compatibility: 11–36V input range Signal type: Ethernet data transmission Application: Camera-powered bitbox operation Assembly: Custom-built and quality-tested Use case: Professional cinematography and film production Robust locking mechanism with Anglissimo alignment Suitable for handheld, cart, and studio rig configurations Dimensions & Weight Cable length: 18 inches (46 cm) Lightweight and flexible for minimal connector strain Compact design suitable for tight camera rigs Bitbox Cable Guide All ARRI ALEXA Cameras Alexa Y CableAnglissimo Alexa Y Cable (Right Angle – preferred for Alexa MINI and MINI LF) Red V-Raptor XL RED GigE Cable 9-pin LEMO OB Red Komodo USB-C Red V-Raptor USB-C Sony Venice 1 & 2 Ethernet / RJ45 Cable Sony Burano Ethernet / RJ45 Cable Freefly Ember Ethernet / RJ45 Cable Phantom Flex 4K 8-pin Fischer to RJ45 Cable (Phantom owners usually have these already) Pixboom Spark USB-C Canon C80 Ethernet / RJ45 Cable Canon C400 Ethernet / RJ45 Cable * All cameras with Ethernet/RJ 45 Connection

Reliable Power and Ethernet Integration for Arri ALEXA The Bit Part Alexa Y Cable is a purpose-built interface cable designed to integrate bitbox systems cleanly and safely with ARRI ALEXA cameras. It combines Ethernet connectivity and power distribution into a single, robust solution, reducing cable clutter while maintaining the reliability required for professional cinema production environments. Built using genuine LEMO connectors, the Alexa Y Cable ensures secure locking connections and long-term durability under continuous on-set use. The 18-inch cable length is optimized for tidy rig layouts, making it ideal for camera builds where space management, strain relief, and signal integrity are critical. The ALEXA Ethernet port outputs 24 volts, and this cable is engineered accordingly. The integrated 2-pin LEMO output delivers 24V, which falls safely within the bitbox input voltage range of 11–36V. This allows the bitbox to be powered directly from the camera without additional regulators or power accessories, simplifying setup and minimizing potential failure points. As a custom-order product, each Alexa Y Cable is assembled with precision and tested to meet Bit Part’s electrical and mechanical standards. This makes it a dependable solution for camera assistants, DITs, and technicians who require a clean, camera-powered connection between ALEXA systems and bitbox hardware. Features – Bit Part Alexa Y Cable Designed specifically for ARRI ALEXA camera systems Combined Ethernet and power breakout in a single Y cable Genuine LEMO connectors for secure locking connections Optimized 18-inch cable length for clean camera rigs Provides direct power to bitbox from the camera Delivers 24V via 2-pin LEMO output Fully compatible with bitbox input range of 11–36V Reduces cable clutter and setup complexity Built for professional cinema production environments Technical Specifications Cable type: Ethernet and power Y cable Camera compatibility: ARRI ALEXA Ethernet port Connector type: Genuine LEMO connectors Power output voltage: 24V bitbox input compatibility: 11–36V Cable length: 18 inches Signal type: Ethernet data Use case: Camera-powered bitbox operation Manufacturing: Custom-assembled to order Dimensions & Weight Cable length: 18 inches (approx. 46 cm) Compact, flexible cable design for tight rigs Lightweight construction for minimal strain on connectors Bitbox Cable Guide All ARRI ALEXA Cameras Alexa Y CableAnglissimo Alexa Y Cable (Right Angle – preferred for Alexa MINI and MINI LF) Red V-Raptor XL RED GigE Cable 9-pin LEMO OB Red Komodo USB-C Red V-Raptor USB-C Sony Venice 1 & 2 Ethernet / RJ45 Cable Sony Burano Ethernet / RJ45 Cable Freefly Ember Ethernet / RJ45 Cable Phantom Flex 4K 8-pin Fischer to RJ45 Cable (Phantom owners usually have these already) Pixboom Spark USB-C Canon C80 Ethernet / RJ45 Cable Canon C400 Ethernet / RJ45 Cable * All cameras with Ethernet/RJ 45 Connection